Skip to content

L
linux
Commit e1c21608 authored by Mark Pearson's avatar Mark Pearson Committed by Hans de Goede
Browse files
Options

platform/x86: thinkpad_acpi: Add PSC mode support 

The Lenovo AMD platforms use PSC mode for providing platform
profile support.

Detect if PSC mode is available and add support for setting the
different profile modes appropriately.

Note - if both MMC mode and PSC mode are available then MMC mode
will be used in preference.

Tested on T14 G1 AMD and T14s G2 AMD.
Signed-off-by: default avatarMark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220225182505.7234-1-markpearson@lenovo.comReviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
parent a3d38af3
Hide whitespace changes
Inline Side-by-side
Showing with 119 additions and 53 deletions
drivers/platform/x86/thinkpad_acpi.c
View file @ e1c21608
......@@ -10130,6 +10130,7 @@ static struct ibm_struct proxsensor_driver_data = {
#define DYTC_CMD_FUNC_CAP 3 /* To get DYTC capabilities */
#define DYTC_FC_MMC 27 /* MMC Mode supported */
#define DYTC_FC_PSC 29 /* PSC Mode supported */
#define DYTC_GET_FUNCTION_BIT 8 /* Bits 8-11 - function setting */
#define DYTC_GET_MODE_BIT 12 /* Bits 12-15 - mode setting */
......@@ -10140,12 +10141,17 @@ static struct ibm_struct proxsensor_driver_data = {
#define DYTC_FUNCTION_STD 0 /* Function = 0, standard mode */
#define DYTC_FUNCTION_CQL 1 /* Function = 1, lap mode */
#define DYTC_FUNCTION_MMC 11 /* Function = 11, desk mode */
#define DYTC_FUNCTION_MMC 11 /* Function = 11, MMC mode */
#define DYTC_FUNCTION_PSC 13 /* Function = 13, PSC mode */
#define DYTC_MODE_PERFORM 2 /* High power mode aka performance */
#define DYTC_MODE_LOWPOWER 3 /* Low power mode */
#define DYTC_MODE_BALANCE 0xF /* Default mode aka balanced */
#define DYTC_MODE_MMC_BALANCE 0 /* Default mode from MMC_GET, aka balanced */
#define DYTC_MODE_MMC_PERFORM 2 /* High power mode aka performance */
#define DYTC_MODE_MMC_LOWPOWER 3 /* Low power mode */
#define DYTC_MODE_MMC_BALANCE 0xF /* Default mode aka balanced */
#define DYTC_MODE_MMC_DEFAULT 0 /* Default mode from MMC_GET, aka balanced */
#define DYTC_MODE_PSC_LOWPOWER 3 /* Low power mode */
#define DYTC_MODE_PSC_BALANCE 5 /* Default mode aka balanced */
#define DYTC_MODE_PSC_PERFORM 7 /* High power mode aka performance */
#define DYTC_ERR_MASK 0xF /* Bits 0-3 in cmd result are the error result */
#define DYTC_ERR_SUCCESS 1 /* CMD completed successful */
......@@ -10155,10 +10161,16 @@ static struct ibm_struct proxsensor_driver_data = {
(mode) << DYTC_SET_MODE_BIT | \
(on) << DYTC_SET_VALID_BIT)
#define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 0)
#define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_MMC_BALANCE, 0)
#define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_MMC_BALANCE, 1)
#define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 1)
enum dytc_profile_funcmode {
DYTC_FUNCMODE_NONE = 0,
DYTC_FUNCMODE_MMC,
DYTC_FUNCMODE_PSC,
};
static enum dytc_profile_funcmode dytc_profile_available;
static enum platform_profile_option dytc_current_profile;
static atomic_t dytc_ignore_event = ATOMIC_INIT(0);
static DEFINE_MUTEX(dytc_mutex);
......@@ -10166,19 +10178,37 @@ static bool dytc_mmc_get_available;
static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile)
{
switch (dytcmode) {
case DYTC_MODE_LOWPOWER:
*profile = PLATFORM_PROFILE_LOW_POWER;
break;
case DYTC_MODE_BALANCE:
case DYTC_MODE_MMC_BALANCE:
*profile = PLATFORM_PROFILE_BALANCED;
break;
case DYTC_MODE_PERFORM:
*profile = PLATFORM_PROFILE_PERFORMANCE;
break;
default: /* Unknown mode */
return -EINVAL;
if (dytc_profile_available == DYTC_FUNCMODE_MMC) {
switch (dytcmode) {
case DYTC_MODE_MMC_LOWPOWER:
*profile = PLATFORM_PROFILE_LOW_POWER;
break;
case DYTC_MODE_MMC_DEFAULT:
case DYTC_MODE_MMC_BALANCE:
*profile = PLATFORM_PROFILE_BALANCED;
break;
case DYTC_MODE_MMC_PERFORM:
*profile = PLATFORM_PROFILE_PERFORMANCE;
break;
default: /* Unknown mode */
return -EINVAL;
}
return 0;
}
if (dytc_profile_available == DYTC_FUNCMODE_PSC) {
switch (dytcmode) {
case DYTC_MODE_PSC_LOWPOWER:
*profile = PLATFORM_PROFILE_LOW_POWER;
break;
case DYTC_MODE_PSC_BALANCE:
*profile = PLATFORM_PROFILE_BALANCED;
break;
case DYTC_MODE_PSC_PERFORM:
*profile = PLATFORM_PROFILE_PERFORMANCE;
break;
default: /* Unknown mode */
return -EINVAL;
}
}
return 0;
}
......@@ -10187,13 +10217,22 @@ static int convert_profile_to_dytc(enum platform_profile_option profile, int *pe
{
switch (profile) {
case PLATFORM_PROFILE_LOW_POWER:
*perfmode = DYTC_MODE_LOWPOWER;
if (dytc_profile_available == DYTC_FUNCMODE_MMC)
*perfmode = DYTC_MODE_MMC_LOWPOWER;
else if (dytc_profile_available == DYTC_FUNCMODE_PSC)
*perfmode = DYTC_MODE_PSC_LOWPOWER;
break;
case PLATFORM_PROFILE_BALANCED:
*perfmode = DYTC_MODE_BALANCE;
if (dytc_profile_available == DYTC_FUNCMODE_MMC)
*perfmode = DYTC_MODE_MMC_BALANCE;
else if (dytc_profile_available == DYTC_FUNCMODE_PSC)
*perfmode = DYTC_MODE_PSC_BALANCE;
break;
case PLATFORM_PROFILE_PERFORMANCE:
*perfmode = DYTC_MODE_PERFORM;
if (dytc_profile_available == DYTC_FUNCMODE_MMC)
*perfmode = DYTC_MODE_MMC_PERFORM;
else if (dytc_profile_available == DYTC_FUNCMODE_PSC)
*perfmode = DYTC_MODE_PSC_PERFORM;
break;
default: /* Unknown profile */
return -EOPNOTSUPP;
......@@ -10266,25 +10305,39 @@ static int dytc_profile_set(struct platform_profile_handler *pprof,
if (err)
return err;
if (profile == PLATFORM_PROFILE_BALANCED) {
/*
* To get back to balanced mode we need to issue a reset command.
* Note we still need to disable CQL mode before hand and re-enable
* it afterwards, otherwise dytc_lapmode gets reset to 0 and stays
* stuck at 0 for aprox. 30 minutes.
*/
err = dytc_cql_command(DYTC_CMD_RESET, &output);
if (err)
goto unlock;
} else {
if (dytc_profile_available == DYTC_FUNCMODE_MMC) {
if (profile == PLATFORM_PROFILE_BALANCED) {
/*
* To get back to balanced mode we need to issue a reset command.
* Note we still need to disable CQL mode before hand and re-enable
* it afterwards, otherwise dytc_lapmode gets reset to 0 and stays
* stuck at 0 for aprox. 30 minutes.
*/
err = dytc_cql_command(DYTC_CMD_RESET, &output);
if (err)
goto unlock;
} else {
int perfmode;
err = convert_profile_to_dytc(profile, &perfmode);
if (err)
goto unlock;
/* Determine if we are in CQL mode. This alters the commands we do */
err = dytc_cql_command(DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1),
&output);
if (err)
goto unlock;
}
}
if (dytc_profile_available == DYTC_FUNCMODE_PSC) {
int perfmode;
err = convert_profile_to_dytc(profile, &perfmode);
if (err)
goto unlock;
/* Determine if we are in CQL mode. This alters the commands we do */
err = dytc_cql_command(DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1), &output);
err = dytc_command(DYTC_SET_COMMAND(DYTC_FUNCTION_PSC, perfmode, 1), &output);
if (err)
goto unlock;
}
......@@ -10302,10 +10355,14 @@ static void dytc_profile_refresh(void)
int perfmode;
mutex_lock(&dytc_mutex);
if (dytc_mmc_get_available)
err = dytc_command(DYTC_CMD_MMC_GET, &output);
else
err = dytc_cql_command(DYTC_CMD_GET, &output);
if (dytc_profile_available == DYTC_FUNCMODE_MMC) {
if (dytc_mmc_get_available)
err = dytc_command(DYTC_CMD_MMC_GET, &output);
else
err = dytc_cql_command(DYTC_CMD_GET, &output);
} else if (dytc_profile_available == DYTC_FUNCMODE_PSC)
err = dytc_command(DYTC_CMD_GET, &output);
mutex_unlock(&dytc_mutex);
if (err)
return;
......@@ -10332,6 +10389,7 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
set_bit(PLATFORM_PROFILE_BALANCED, dytc_profile.choices);
set_bit(PLATFORM_PROFILE_PERFORMANCE, dytc_profile.choices);
dytc_profile_available = DYTC_FUNCMODE_NONE;
err = dytc_command(DYTC_CMD_QUERY, &output);
if (err)
return err;
......@@ -10343,27 +10401,34 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
if (dytc_version < 5)
return -ENODEV;
/* Check what capabilities are supported. Currently MMC is needed */
/* Check what capabilities are supported */
err = dytc_command(DYTC_CMD_FUNC_CAP, &output);
if (err)
return err;
if (!(output & BIT(DYTC_FC_MMC))) {
dbg_printk(TPACPI_DBG_INIT, " DYTC MMC mode not supported\n");
if (test_bit(DYTC_FC_MMC, (void *)&output)) { /* MMC MODE */
dytc_profile_available = DYTC_FUNCMODE_MMC;
/*
* Check if MMC_GET functionality available
* Version > 6 and return success from MMC_GET command
*/
dytc_mmc_get_available = false;
if (dytc_version >= 6) {
err = dytc_command(DYTC_CMD_MMC_GET, &output);
if (!err && ((output & DYTC_ERR_MASK) == DYTC_ERR_SUCCESS))
dytc_mmc_get_available = true;
}
} else if (test_bit(DYTC_FC_PSC, (void *)&output)) { /*PSC MODE */
dytc_profile_available = DYTC_FUNCMODE_PSC;
} else {
dbg_printk(TPACPI_DBG_INIT, "No DYTC support available\n");
return -ENODEV;
}
dbg_printk(TPACPI_DBG_INIT,
"DYTC version %d: thermal mode available\n", dytc_version);
/*
* Check if MMC_GET functionality available
* Version > 6 and return success from MMC_GET command
*/
dytc_mmc_get_available = false;
if (dytc_version >= 6) {
err = dytc_command(DYTC_CMD_MMC_GET, &output);
if (!err && ((output & DYTC_ERR_MASK) == DYTC_ERR_SUCCESS))
dytc_mmc_get_available = true;
}
/* Create platform_profile structure and register */
err = platform_profile_register(&dytc_profile);
/*
......@@ -10381,6 +10446,7 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
static void dytc_profile_exit(void)
{
dytc_profile_available = DYTC_FUNCMODE_NONE;
platform_profile_remove();
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7