Skip to content

L
linux
Commit e1e4a1a4 authored by Kevin Hilman's avatar Kevin Hilman
Browse files
Options

Merge branch 'v4.8/dt64' into v4.8/dt64-2

parents 39f0d980 c763eb82
Hide whitespace changes
Inline Side-by-side
Showing with 478 additions and 4 deletions
Documentation/devicetree/bindings/firmware/meson/meson_sm.txt 0 → 100644
View file @ e1e4a1a4
* Amlogic Secure Monitor
In the Amlogic SoCs the Secure Monitor code is used to provide access to the
NVMEM, enable JTAG, set USB boot, etc...
Required properties for the secure monitor node:
- compatible: Should be "amlogic,meson-gxbb-sm"
Example:
firmware {
sm: secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
};
};
Documentation/devicetree/bindings/media/meson-ir.txt
View file @ e1e4a1a4
* Amlogic Meson IR remote control receiver
Required properties:
- compatible : should be "amlogic,meson6-ir"
- compatible : depending on the platform this should be one of:
- "amlogic,meson6-ir"
- "amlogic,meson8b-ir"
- "amlogic,meson-gxbb-ir"
- reg : physical base address and length of the device registers
- interrupts : a single specifier for the interrupt from the device
......
Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt 0 → 100644
View file @ e1e4a1a4
= Amlogic eFuse device tree bindings =
Required properties:
- compatible: should be "amlogic,meson-gxbb-efuse"
= Data cells =
Are child nodes of eFuse, bindings of which as described in
bindings/nvmem/nvmem.txt
Example:
efuse: efuse {
compatible = "amlogic,meson-gxbb-efuse";
#address-cells = <1>;
#size-cells = <1>;
sn: sn@14 {
reg = <0x14 0x10>;
};
eth_mac: eth_mac@34 {
reg = <0x34 0x10>;
};
bid: bid@46 {
reg = <0x46 0x30>;
};
};
= Data consumers =
Are device nodes which consume nvmem data cells.
For example:
eth_mac {
...
nvmem-cells = <&eth_mac>;
nvmem-cell-names = "eth_mac";
};
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
View file @ e1e4a1a4
......@@ -87,3 +87,14 @@ &ethmac {
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&i2c_A {
status = "okay";
pinctrl-0 = <&i2c_a_pins>;
pinctrl-names = "default";
};
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
View file @ e1e4a1a4
......@@ -50,3 +50,9 @@ / {
compatible = "amlogic,p200", "amlogic,meson-gxbb";
model = "Amlogic Meson GXBB P200 Development Board";
};
&i2c_B {
status = "okay";
pinctrl-0 = <&i2c_b_pins>;
pinctrl-names = "default";
};
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
View file @ e1e4a1a4
......@@ -57,6 +57,19 @@ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
usb_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
regulator-name = "USB_PWR";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
/* signal name in schematic: USB_PWR_EN */
gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
/* This UART is brought out to the DB9 connector */
......@@ -72,3 +85,25 @@ &ethmac {
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&usb0_phy {
status = "okay";
phy-supply = <&usb_pwr>;
};
&usb1_phy {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
View file @ e1e4a1a4
......@@ -52,6 +52,19 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
usb_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "USB0_VBUS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&uart_AO {
......@@ -60,3 +73,32 @@ &uart_AO {
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
};
&usb0_phy {
status = "okay";
phy-supply = <&usb_vbus>;
};
&usb1_phy {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
View file @ e1e4a1a4
......@@ -45,6 +45,9 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/reset/gxbb-aoclkc.h>
/ {
compatible = "amlogic,meson-gxbb";
......@@ -99,6 +102,30 @@ psci {
method = "smc";
};
firmware {
sm: secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
};
};
efuse: efuse {
compatible = "amlogic,meson-gxbb-efuse";
#address-cells = <1>;
#size-cells = <1>;
sn: sn@14 {
reg = <0x14 0x10>;
};
eth_mac: eth_mac@34 {
reg = <0x34 0x10>;
};
bid: bid@46 {
reg = <0x46 0x30>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
......@@ -124,6 +151,25 @@ soc {
#size-cells = <2>;
ranges;
usb0_phy: phy@c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0xc0000000 0x0 0x20>;
resets = <&reset RESET_USB_OTG>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
clock-names = "usb_general", "usb";
status = "disabled";
};
usb1_phy: phy@c0000020 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0xc0000020 0x0 0x20>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
clock-names = "usb_general", "usb";
status = "disabled";
};
cbus: cbus@c1100000 {
compatible = "simple-bus";
reg = <0x0 0xc1100000 0x0 0x100000>;
......@@ -153,6 +199,27 @@ uart_B: serial@84dc {
status = "disabled";
};
pwm_ab: pwm@8550 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_cd: pwm@8650 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08650 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
uart_C: serial@8700 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x8700 0x0 0x14>;
......@@ -160,6 +227,51 @@ uart_C: serial@8700 {
clocks = <&xtal>;
status = "disabled";
};
watchdog@98d0 {
compatible = "amlogic,meson-gxbb-wdt";
reg = <0x0 0x098d0 0x0 0x10>;
clocks = <&xtal>;
};
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clkc CLKID_SPI>;
status = "disabled";
};
i2c_A: i2c@8500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x08500 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_B: i2c@87c0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_C: i2c@87e0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087e0 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
gic: interrupt-controller@c4301000 {
......@@ -203,6 +315,56 @@ mux {
function = "uart_ao";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
};
};
i2c_ao_pins: i2c_ao {
mux {
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
};
};
pwm_ao_a_3_pins: pwm_ao_a_3 {
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a_3";
};
};
pwm_ao_a_6_pins: pwm_ao_a_6 {
mux {
groups = "pwm_ao_a_6";
function = "pwm_ao_a_6";
};
};
pwm_ao_a_12_pins: pwm_ao_a_12 {
mux {
groups = "pwm_ao_a_12";
function = "pwm_ao_a_12";
};
};
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
};
};
};
clkc_AO: clock-controller@040 {
compatible = "amlogic,gxbb-aoclkc";
reg = <0x0 0x00040 0x0 0x4>;
#clock-cells = <1>;
#reset-cells = <1>;
};
uart_AO: serial@4c0 {
......@@ -212,6 +374,30 @@ uart_AO: serial@4c0 {
clocks = <&xtal>;
status = "disabled";
};
ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
pwm_ab_AO: pwm@550 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x0550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
i2c_AO: i2c@500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x500 0x0 0x20>;
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_AO_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
periphs: periphs@c8834000 {
......@@ -251,6 +437,16 @@ mux {
};
};
nor_pins: nor {
mux {
groups = "nor_d",
"nor_q",
"nor_c",
"nor_cs";
function = "nor";
};
};
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
......@@ -263,6 +459,25 @@ mux {
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd",
"sdio_clk";
function = "sdio";
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
function = "sdio";
};
};
uart_a_pins: uart_a {
mux {
groups = "uart_tx_a",
......@@ -287,6 +502,30 @@ mux {
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
};
};
i2c_b_pins: i2c_b {
mux {
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
};
};
i2c_c_pins: i2c_c {
mux {
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
};
};
eth_pins: eth_c {
mux {
groups = "eth_mdio",
......@@ -306,6 +545,55 @@ mux {
function = "eth";
};
};
pwm_a_x_pins: pwm_a_x {
mux {
groups = "pwm_a_x";
function = "pwm_a_x";
};
};
pwm_a_y_pins: pwm_a_y {
mux {
groups = "pwm_a_y";
function = "pwm_a_y";
};
};
pwm_b_pins: pwm_b {
mux {
groups = "pwm_b";
function = "pwm_b";
};
};
pwm_d_pins: pwm_d {
mux {
groups = "pwm_d";
function = "pwm_d";
};
};
pwm_e_pins: pwm_e {
mux {
groups = "pwm_e";
function = "pwm_e";
};
};
pwm_f_x_pins: pwm_f_x {
mux {
groups = "pwm_f_x";
function = "pwm_f_x";
};
};
pwm_f_y_pins: pwm_f_y {
mux {
groups = "pwm_f_y";
function = "pwm_f_y";
};
};
};
};
......@@ -321,6 +609,15 @@ clkc: clock-controller@0 {
#clock-cells = <1>;
reg = <0x0 0x0 0x0 0x3db>;
};
mailbox: mailbox@404 {
compatible = "amlogic,meson-gxbb-mhu";
reg = <0 0x404 0 0x4c>;
interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
<0 209 IRQ_TYPE_EDGE_RISING>,
<0 210 IRQ_TYPE_EDGE_RISING>;
#mbox-cells = <1>;
};
};
apb: apb@d0000000 {
......@@ -331,14 +628,40 @@ apb: apb@d0000000 {
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
};
usb0: usb@c9000000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9000000 0x0 0x40000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
clock-names = "otg";
phys = <&usb0_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
usb1: usb@c9100000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9100000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "otg";
phys = <&usb1_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson6-dwmac", "snps,dwmac";
compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
clocks = <&xtal>;
clock-names = "stmmaceth";
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;
clock-names = "stmmaceth", "clkin0", "clkin1";
phy-mode = "rgmii";
status = "disabled";
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7