selftests: mlxsw: Introduce devlink line card provision/unprovision/activation tests

Introduce basic line card manipulation which consists of provisioning,
unprovisioning and activation of a line card.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/drivers/net/mlxsw/devlink_linecard.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# In addition to the common variables, user might use:
+# LC_SLOT - If not set, all probed line cards are going to be tested,
+#	    with an exception of the "activation_16x100G_test".
+#	    It set, only the selected line card is going to be used
+#	    for tests, including "activation_16x100G_test".
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	unprovision_test
+	provision_test
+	activation_16x100G_test
+"
+
+NUM_NETIFS=0
+
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+
+until_lc_state_is()
+{
+	local state=$1; shift
+	local current=$("$@")
+
+	echo "$current"
+	[ "$current" == "$state" ]
+}
+
+until_lc_state_is_not()
+{
+	! until_lc_state_is "$@"
+}
+
+lc_state_get()
+{
+	local lc=$1
+
+	devlink lc show $DEVLINK_DEV lc $lc -j | jq -e -r ".[][][].state"
+}
+
+lc_wait_until_state_changes()
+{
+	local lc=$1
+	local state=$2
+	local timeout=$3 # ms
+
+	busywait "$timeout" until_lc_state_is_not "$state" lc_state_get "$lc"
+}
+
+lc_wait_until_state_becomes()
+{
+	local lc=$1
+	local state=$2
+	local timeout=$3 # ms
+
+	busywait "$timeout" until_lc_state_is "$state" lc_state_get "$lc"
+}
+
+until_lc_port_count_is()
+{
+	local port_count=$1; shift
+	local current=$("$@")
+
+	echo "$current"
+	[ $current == $port_count ]
+}
+
+lc_port_count_get()
+{
+	local lc=$1
+
+	devlink port -j | jq -e -r ".[][] | select(.lc==$lc) | .port" | wc -l
+}
+
+lc_wait_until_port_count_is()
+{
+	local lc=$1
+	local port_count=$2
+	local timeout=$3 # ms
+
+	busywait "$timeout" until_lc_port_count_is "$port_count" lc_port_count_get "$lc"
+}
+
+PROV_UNPROV_TIMEOUT=8000 # ms
+POST_PROV_ACT_TIMEOUT=2000 # ms
+PROV_PORTS_INSTANTIATION_TIMEOUT=15000 # ms
+
+unprovision_one()
+{
+	local lc=$1
+	local state
+
+	state=$(lc_state_get $lc)
+	check_err $? "Failed to get state of linecard $lc"
+	if [[ "$state" == "unprovisioned" ]]; then
+		return
+	fi
+
+	log_info "Unprovisioning linecard $lc"
+
+	devlink lc set $DEVLINK_DEV lc $lc notype
+	check_err $? "Failed to trigger linecard $lc unprovisioning"
+
+	state=$(lc_wait_until_state_changes $lc "unprovisioning" \
+		$PROV_UNPROV_TIMEOUT)
+	check_err $? "Failed to unprovision linecard $lc (timeout)"
+
+	[ "$state" == "unprovisioned" ]
+	check_err $? "Failed to unprovision linecard $lc (state=$state)"
+}
+
+provision_one()
+{
+	local lc=$1
+	local type=$2
+	local state
+
+	log_info "Provisioning linecard $lc"
+
+	devlink lc set $DEVLINK_DEV lc $lc type $type
+	check_err $? "Failed trigger linecard $lc provisioning"
+
+	state=$(lc_wait_until_state_changes $lc "provisioning" \
+		$PROV_UNPROV_TIMEOUT)
+	check_err $? "Failed to provision linecard $lc (timeout)"
+
+	[ "$state" == "provisioned" ] || [ "$state" == "active" ]
+	check_err $? "Failed to provision linecard $lc (state=$state)"
+
+	provisioned_type=$(devlink lc show $DEVLINK_DEV lc $lc -j | jq -e -r ".[][][].type")
+	[ "$provisioned_type" == "$type" ]
+	check_err $? "Wrong provision type returned for linecard $lc (got \"$provisioned_type\", expected \"$type\")"
+
+	# Wait for possible activation to make sure the state
+	# won't change after return from this function.
+	state=$(lc_wait_until_state_becomes $lc "active" \
+		$POST_PROV_ACT_TIMEOUT)
+}
+
+unprovision_test()
+{
+	RET=0
+	local lc
+
+	lc=$LC_SLOT
+	unprovision_one $lc
+	log_test "Unprovision"
+}
+
+LC_16X100G_TYPE="16x100G"
+LC_16X100G_PORT_COUNT=16
+
+supported_types_check()
+{
+	local lc=$1
+	local supported_types_count
+	local type_index
+	local lc_16x100_found=false
+
+	supported_types_count=$(devlink lc show $DEVLINK_DEV lc $lc -j | \
+				jq -e -r ".[][][].supported_types | length")
+	[ $supported_types_count != 0 ]
+	check_err $? "No supported types found for linecard $lc"
+	for (( type_index=0; type_index<$supported_types_count; type_index++ ))
+	do
+		type=$(devlink lc show $DEVLINK_DEV lc $lc -j | \
+		       jq -e -r ".[][][].supported_types[$type_index]")
+		if [[ "$type" == "$LC_16X100G_TYPE" ]]; then
+			lc_16x100_found=true
+			break
+		fi
+	done
+	[ $lc_16x100_found = true ]
+	check_err $? "16X100G not found between supported types of linecard $lc"
+}
+
+ports_check()
+{
+	local lc=$1
+	local expected_port_count=$2
+	local port_count
+
+	port_count=$(lc_wait_until_port_count_is $lc $expected_port_count \
+		$PROV_PORTS_INSTANTIATION_TIMEOUT)
+	[ $port_count != 0 ]
+	check_err $? "No port associated with linecard $lc"
+	[ $port_count == $expected_port_count ]
+	check_err $? "Unexpected port count linecard $lc (got $port_count, expected $expected_port_count)"
+}
+
+provision_test()
+{
+	RET=0
+	local lc
+	local type
+	local state
+
+	lc=$LC_SLOT
+	supported_types_check $lc
+	state=$(lc_state_get $lc)
+	check_err $? "Failed to get state of linecard $lc"
+	if [[ "$state" != "unprovisioned" ]]; then
+		unprovision_one $lc
+	fi
+	provision_one $lc $LC_16X100G_TYPE
+	ports_check $lc $LC_16X100G_PORT_COUNT
+	log_test "Provision"
+}
+
+ACTIVATION_TIMEOUT=20000 # ms
+
+interface_check()
+{
+	ip link set $h1 up
+	ip link set $h2 up
+	ifaces_upped=true
+	setup_wait
+}
+
+activation_16x100G_test()
+{
+	RET=0
+	local lc
+	local type
+	local state
+
+	lc=$LC_SLOT
+	type=$LC_16X100G_TYPE
+
+	unprovision_one $lc
+	provision_one $lc $type
+	state=$(lc_wait_until_state_becomes $lc "active" \
+		$ACTIVATION_TIMEOUT)
+	check_err $? "Failed to get linecard $lc activated (timeout)"
+
+	interface_check
+
+	log_test "Activation 16x100G"
+}
+
+setup_prepare()
+{
+	local lc_num=$(devlink lc show -j | jq -e -r ".[][\"$DEVLINK_DEV\"] |length")
+	if [[ $? -ne 0 ]] || [[ $lc_num -eq 0 ]]; then
+		echo "SKIP: No linecard support found"
+		exit $ksft_skip
+	fi
+
+	if [ -z "$LC_SLOT" ]; then
+		echo "SKIP: \"LC_SLOT\" variable not provided"
+		exit $ksft_skip
+	fi
+
+	# Interfaces are not present during the script start,
+	# that's why we define NUM_NETIFS here so dummy
+	# implicit veth pairs are not created.
+	NUM_NETIFS=2
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+	ifaces_upped=false
+}
+
+cleanup()
+{
+	if [ "$ifaces_upped" = true ] ; then
+		ip link set $h1 down
+		ip link set $h2 down
+	fi
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS