Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/arm/Kconfig

@@ -84,9 +84,6 @@ config ARCH_CLPS711X
 config ARCH_CO285
 	bool "Co-EBSA285"
 
-config ARCH_PXA
-	bool "PXA2xx-based"
-
 config ARCH_EBSA110
 	bool "EBSA-110"
 	help
@@ -126,6 +123,9 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to sjhill@cotw.com.
 
+config ARCH_PXA
+	bool "PXA2xx-based"
+
 config ARCH_RPC
 	bool "RiscPC"
 	help
@@ -135,9 +135,6 @@ config ARCH_RPC
 config ARCH_SA1100
 	bool "SA1100-based"
 
-config ARCH_SHARK
-	bool "Shark"
-
 config ARCH_S3C2410
 	bool "Samsung S3C2410"
 	help
@@ -145,8 +142,8 @@ config ARCH_S3C2410
 	  BAST (http://www.simtec.co.uk/products/EB110ITX/), the IPAQ 1940 or
 	  the Samsung SMDK2410 development board (and derviatives).
 
-config ARCH_OMAP
-	bool "TI OMAP"
+config ARCH_SHARK
+	bool "Shark"
 
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
@@ -156,6 +153,9 @@ config ARCH_LH7A40X
 	  core with a wide array of integrated devices for
 	  hand-held and low-power applications.
 
+config ARCH_OMAP
+	bool "TI OMAP"
+
 config ARCH_VERSATILE_PB
 	bool "Versatile PB"
 	help

arch/arm/common/dmabounce.c

@@ -100,6 +100,7 @@ find_dmabounce_dev(struct device *dev)
 		if (d->dev == dev)
 			return d;
 	}
+	return NULL;
 }
 
 

arch/arm/kernel/arch.c

@@ -10,7 +10,6 @@
 #include <asm/elf.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 unsigned int vram_size;

arch/arm/mach-adifcc/irq.c

@@ -19,8 +19,6 @@
 #include <asm/irq.h>
 #include <asm/hardware.h>
 
-#include <asm/mach-types.h>
-
 static void xs80200_irq_mask (unsigned int irq)
 {
 	long INTCTL;

arch/arm/mach-iop3xx/iop310-irq.c

@@ -21,8 +21,6 @@
 #include <asm/irq.h>
 #include <asm/hardware.h>
 
-#include <asm/mach-types.h>
-
 extern void xs80200_irq_mask(unsigned int);
 extern void xs80200_irq_unmask(unsigned int);
 extern void xs80200_init_irq(void);

arch/arm/mach-iop3xx/iop321-time.c

@@ -23,7 +23,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
-#include <asm/mach-types.h>
 #include <asm/mach/irq.h>
 
 static unsigned long iop321_gettimeoffset(void)

arch/arm/mach-iop3xx/iq80310-irq.c

@@ -22,8 +22,6 @@
 #include <asm/hardware.h>
 #include <asm/system.h>
 
-#include <asm/mach-types.h>
-
 extern void iop310_init_irq(void);
 extern void iop310_irq_demux(unsigned int, struct irqdesc *, struct pt_regs *);
 

arch/arm/mach-iop3xx/iq80310-time.c

@@ -21,7 +21,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
-#include <asm/mach-types.h>
 #include <asm/mach/irq.h>
 
 static void iq80310_write_timer (u_long val)

arch/arm/mach-iop3xx/mm-321.c

@@ -21,7 +21,6 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <asm/mach-types.h>
 
 
 /*

arch/arm/mach-iop3xx/mm.c

@@ -23,7 +23,6 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <asm/mach-types.h>
 
 #ifdef CONFIG_IOP310_MU
 #include "message.h"

arch/arm/mach-iop3xx/xs80200-irq.c

@@ -17,8 +17,6 @@
 #include <asm/irq.h>
 #include <asm/hardware.h>
 
-#include <asm/mach-types.h>
-
 static void xs80200_irq_mask (unsigned int irq)
 {
 	unsigned long intctl;

arch/arm/mach-ixp4xx/common.c

@@ -30,7 +30,6 @@
 #include <asm/hardware.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/irq.h>

arch/arm/mach-omap/bus.c

@@ -39,7 +39,6 @@
 #include <linux/spinlock.h>
 
 #include <asm/hardware.h>
-#include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>

arch/arm/mach-pxa/generic.c

@@ -104,6 +104,7 @@ static struct platform_device pxamci_device = {
 	.id		= 0,
 	.dev		= {
 		.dma_mask = &pxamci_dmamask,
+		.coherent_dma_mask = 0xffffffff,
 	},
 	.num_resources	= ARRAY_SIZE(pxamci_resources),
 	.resource	= pxamci_resources,

arch/arm/mach-pxa/lubbock.c

@@ -11,11 +11,12 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/major.h>
-#include <linux/fs.h>
+#include <linux/fb.h>
 #include <linux/interrupt.h>
 
 #include <asm/setup.h>
@@ -29,11 +30,22 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/udc.h>
+#include <asm/arch/pxafb.h>
 #include <asm/hardware/sa1111.h>
 
 #include "generic.h"
 
 
+void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(lubbock_set_misc_wr);
+
 static unsigned long lubbock_irq_enabled;
 
 static void lubbock_mask_irq(unsigned int irq)
@@ -148,9 +160,29 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 };
 
+static struct pxafb_mach_info sharp_lm8v31 __initdata = {
+	.pixclock	= 270000,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 16,
+	.hsync_len	= 1,
+	.left_margin	= 3,
+	.right_margin	= 3,
+	.vsync_len	= 1,
+	.upper_margin	= 0,
+	.lower_margin	= 0,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 0,
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.lccr0		= LCCR0_SDS,
+	.lccr3		= LCCR3_PCP | LCCR3_Acb(255),
+};
+
 static void __init lubbock_init(void)
 {
 	pxa_set_udc_info(&udc_info);
+	set_pxa_fb_info(&sharp_lm8v31);
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 

arch/arm/mach-s3c2410/s3c2410.c

@@ -31,7 +31,6 @@
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach-types.h>
 
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-serial.h>

drivers/input/serio/sa1111ps2.c

@@ -45,7 +45,6 @@ static irqreturn_t ps2_rxint(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct ps2if *ps2if = dev_id;
 	unsigned int scancode, flag, status;
-	int handled = IRQ_NONE;
 
 	status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
 	while (status & PS2STAT_RXF) {
@@ -63,11 +62,9 @@ static irqreturn_t ps2_rxint(int irq, void *dev_id, struct pt_regs *regs)
 		serio_interrupt(&ps2if->io, scancode, flag, regs);
 
 		status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
-
-		handled = IRQ_HANDLED;
         }
 
-        return handled;
+        return IRQ_HANDLED;
 }
 
 /*

drivers/pcmcia/pxa2xx_lubbock.c

@@ -20,9 +20,11 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 
 #include <asm/hardware.h>
 #include <asm/hardware/sa1111.h>
+#include <asm/mach-types.h>
 
 #include "sa1111_generic.h"
 
@@ -30,156 +32,170 @@ static int
 lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 				const socket_state_t *state)
 {
-  unsigned long flags, gpio, misc_wr;
-  int ret = 1;
-  struct pcmcia_state new_state;
-
-  local_irq_save(flags);
-
-  gpio = PA_DWR;
-  misc_wr = LUB_MISC_WR;
-
-  /* Lubbock uses the Maxim MAX1602, with the following connections:
-   *
-   * Socket 0 (PCMCIA):
-   *	MAX1602	Lubbock		Register
-   *	Pin	Signal
-   *	-----	-------		----------------------
-   *	A0VPP	S0_PWR0		SA-1111 GPIO A<0>
-   *	A1VPP	S0_PWR1		SA-1111 GPIO A<1>
-   *	A0VCC	S0_PWR2		SA-1111 GPIO A<2>
-   *	A1VCC	S0_PWR3		SA-1111 GPIO A<3>
-   *	VX	VCC
-   *	VY	+3.3V
-   *	12IN	+12V
-   *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
-   *
-   * Socket 1 (CF):
-   *	MAX1602	Lubbock		Register
-   *	Pin	Signal
-   *	-----	-------		----------------------
-   *	A0VPP	GND		VPP is not connected
-   *	A1VPP	GND		VPP is not connected
-   *	A0VCC	S1_PWR0		MISC_WR<14>
-   *	A1VCC	S1_PWR0		MISC_WR<15>
-   *	VX	VCC
-   *	VY	+3.3V
-   *	12IN	GND		VPP is not connected
-   *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
-   *
-   */
-
-again:
-  switch(skt->nr){
-  case 0:
-
-    switch(state->Vcc){
-    case 0:
-      gpio &= ~(GPIO_bit(2) | GPIO_bit(3));
-      break;
-
-    case 33:
-      gpio = (gpio & ~(GPIO_bit(2) | GPIO_bit(3))) | GPIO_bit(3);
-      break;
-
-    case 50:
-      gpio = (gpio & ~(GPIO_bit(2) | GPIO_bit(3))) | GPIO_bit(2);
-      break;
-
-    default:
-      printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__, state->Vcc);
-      ret = -1;
-    }
-
-    switch(state->Vpp){
-    case 0:
-      gpio &= ~(GPIO_bit(0) | GPIO_bit(1));
-      break;
-
-    case 120:
-      gpio = (gpio & ~(GPIO_bit(0) | GPIO_bit(1))) | GPIO_bit(1);
-      break;
-
-    default:
-      /* REVISIT: I'm not sure about this? Is this correct?
-         Is it always safe or do we have potential problems
-         with bogus combinations of Vcc and Vpp settings? */
-      if(state->Vpp == state->Vcc)
-        gpio = (gpio & ~(GPIO_bit(0) | GPIO_bit(1))) | GPIO_bit(0);
-      else {
-	printk(KERN_ERR "%s(): unrecognized Vpp %u\n", __FUNCTION__, state->Vpp);
-	ret = -1;
-	break;
-      }
-    }
-
-    break;
-
-  case 1:
-    switch(state->Vcc){
-    case 0:
-      misc_wr &= ~((1 << 15) | (1 << 14));
-      break;
-
-    case 33:
-      misc_wr = (misc_wr & ~(1 << 15)) | (1 << 14);
-      gpio = (gpio & ~(GPIO_bit(2) | GPIO_bit(3))) | GPIO_bit(2);
-      break;
-
-    case 50:
-      misc_wr = (misc_wr & ~(1 << 15)) | (1 << 14);
-      break;
-
-    default:
-      printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__, state->Vcc);
-      ret = -1;
-      break;
-    }
-
-    if(state->Vpp!=state->Vcc && state->Vpp!=0){
-      printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n", __FUNCTION__, state->Vpp);
-      ret = -1;
-      break;
-    }
-
-    break;
-
-  default:
-    ret = -1;
-  }
-
-  if (ret >= 0) {
-    sa1111_pcmcia_configure_socket(skt, state);
-    LUB_MISC_WR = misc_wr;
-    PA_DWR = gpio;
-  }
-
-  if (ret > 0) {
-    ret = 0;
+	unsigned int pa_dwr_mask, pa_dwr_set, misc_mask, misc_set;
+	int ret = 0;
+
+	pa_dwr_mask = pa_dwr_set = misc_mask = misc_set = 0;
+
+	/* Lubbock uses the Maxim MAX1602, with the following connections:
+	 *
+	 * Socket 0 (PCMCIA):
+	 *	MAX1602	Lubbock		Register
+	 *	Pin	Signal
+	 *	-----	-------		----------------------
+	 *	A0VPP	S0_PWR0		SA-1111 GPIO A<0>
+	 *	A1VPP	S0_PWR1		SA-1111 GPIO A<1>
+	 *	A0VCC	S0_PWR2		SA-1111 GPIO A<2>
+	 *	A1VCC	S0_PWR3		SA-1111 GPIO A<3>
+	 *	VX	VCC
+	 *	VY	+3.3V
+	 *	12IN	+12V
+	 *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
+	 *
+	 * Socket 1 (CF):
+	 *	MAX1602	Lubbock		Register
+	 *	Pin	Signal
+	 *	-----	-------		----------------------
+	 *	A0VPP	GND		VPP is not connected
+	 *	A1VPP	GND		VPP is not connected
+	 *	A0VCC	S1_PWR0		MISC_WR<14>
+	 *	A1VCC	S1_PWR1		MISC_WR<15>
+	 *	VX	VCC
+	 *	VY	+3.3V
+	 *	12IN	GND		VPP is not connected
+	 *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
+	 *
+	 */
+
+ again:
+	switch (skt->nr) {
+	case 0:
+		pa_dwr_mask = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
+
+		switch (state->Vcc) {
+		case 0: /* Hi-Z */
+			break;
+
+		case 33: /* VY */
+			pa_dwr_set |= GPIO_A3;
+			break;
+
+		case 50: /* VX */
+			pa_dwr_set |= GPIO_A2;
+			break;
+
+		default:
+			printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
+			       __FUNCTION__, state->Vcc);
+			ret = -1;
+		}
+
+		switch (state->Vpp) {
+		case 0: /* Hi-Z */
+			break;
+
+		case 120: /* 12IN */
+			pa_dwr_set |= GPIO_A1;
+			break;
+
+		default: /* VCC */
+			if (state->Vpp == state->Vcc)
+				pa_dwr_set |= GPIO_A0;
+			else {
+				printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
+				       __FUNCTION__, state->Vpp);
+				ret = -1;
+				break;
+			}
+		}
+		break;
+
+	case 1:
+		misc_mask = (1 << 15) | (1 << 14);
+
+		switch (state->Vcc) {
+		case 0: /* Hi-Z */
+			break;
+
+		case 33: /* VY */
+			misc_set |= 1 << 15;
+			break;
+
+		case 50: /* VX */
+			misc_set |= 1 << 14;
+			break;
+
+		default:
+			printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
+			       __FUNCTION__, state->Vcc);
+			ret = -1;
+			break;
+		}
+
+		if (state->Vpp != state->Vcc && state->Vpp != 0) {
+			printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
+			       __FUNCTION__, state->Vpp);
+			ret = -1;
+			break;
+		}
+		break;
+
+	default:
+		ret = -1;
+	}
+
+	if (ret == 0)
+		ret = sa1111_pcmcia_configure_socket(skt, state);
+
+	if (ret == 0) {
+		lubbock_set_misc_wr(misc_mask, misc_set);
+		sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set);
+	}
+
 #if 1
-    /*
-     * HACK ALERT:
-     * We can't sense the voltage properly on Lubbock before actually
-     * applying some power to the socket (catch 22).
-     * Resense the socket Voltage Sense pins after applying socket power.
-     */
-    sa1111_pcmcia_socket_state(skt, &new_state);
-    if (state->Vcc == 33 && !new_state.vs_3v && !new_state.vs_Xv) {
-      /* Switch to 5V,  Configure socket with 5V voltage */
-      PA_DWR &= ~(GPIO_bit(0) | GPIO_bit(1) | GPIO_bit(2) | GPIO_bit(3));
-      PA_DDR &= ~(GPIO_bit(0) | GPIO_bit(1) | GPIO_bit(2) | GPIO_bit(3));
-      /* We need to hack around the const qualifier as well to keep this
-         ugly workaround localized and not force it to the rest of the code.
-         Barf bags avaliable in the seat pocket in front of you! */
-      ((socket_state_t *)state)->Vcc = 50;
-      ((socket_state_t *)state)->Vpp = 50;
-      goto again;
-    }
+	if (ret == 0 && state->Vcc == 33) {
+		struct pcmcia_state new_state;
+
+		/*
+		 * HACK ALERT:
+		 * We can't sense the voltage properly on Lubbock before
+		 * actually applying some power to the socket (catch 22).
+		 * Resense the socket Voltage Sense pins after applying
+		 * socket power.
+		 *
+		 * Note: It takes about 2.5ms for the MAX1602 VCC output
+		 * to rise.
+		 */
+		mdelay(3);
+
+		sa1111_pcmcia_socket_state(skt, &new_state);
+
+		if (!new_state.vs_3v && !new_state.vs_Xv) {
+			/*
+			 * Switch to 5V,  Configure socket with 5V voltage
+			 */
+			lubbock_set_misc_wr(misc_mask, 0);
+			sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, 0);
+
+			/*
+			 * It takes about 100ms to turn off Vcc.
+			 */
+			mdelay(100);
+
+			/*
+			 * We need to hack around the const qualifier as
+			 * well to keep this ugly workaround localized and
+			 * not force it to the rest of the code. Barf bags
+			 * avaliable in the seat pocket in front of you!
+			 */
+			((socket_state_t *)state)->Vcc = 50;
+			((socket_state_t *)state)->Vpp = 50;
+			goto again;
+		}
+	}
 #endif
-  }
 
-  local_irq_restore(flags);
-  return ret;
+	return ret;
 }
 
 static struct pcmcia_low_level lubbock_pcmcia_ops = {
@@ -196,7 +212,7 @@ static struct pcmcia_low_level lubbock_pcmcia_ops = {
 
 #include "pxa2xx_base.h"
 
-int __init pcmcia_lubbock_init(struct device *dev)
+int __init pcmcia_lubbock_init(struct sa1111_dev *sadev)
 {
 	int ret = -ENODEV;
 
@@ -205,16 +221,15 @@ int __init pcmcia_lubbock_init(struct device *dev)
 		 * Set GPIO_A<3:0> to be outputs for the MAX1600,
 		 * and switch to standby mode.
 		 */
-		PA_DWR = 0;
-		PA_DDR = 0;
-		PA_SDR = 0;
-		PA_SSR = 0;
+		sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
+		sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+		sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
 
 		/* Set CF Socket 1 power to standby mode. */
-		LUB_MISC_WR &= ~(GPIO_bit(15) | GPIO_bit(14));
+		lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
 
-		dev->platform_data = &lubbock_pcmcia_ops;
-		ret = pxa2xx_drv_pcmcia_probe(dev);
+		sadev->dev.platform_data = &lubbock_pcmcia_ops;
+		ret = pxa2xx_drv_pcmcia_probe(&sadev->dev);
 	}
 
 	return ret;

drivers/pcmcia/sa1111_generic.c

@@ -149,7 +149,7 @@ static int pcmcia_probe(struct sa1111_dev *dev)
 	pcmcia_jornada720_init(&dev->dev);
 #endif
 #ifdef CONFIG_ARCH_LUBBOCK
-	pcmcia_lubbock_init(&dev->dev);
+	pcmcia_lubbock_init(dev);
 #endif
 #ifdef CONFIG_ASSABET_NEPONSET
 	pcmcia_neponset_init(dev);

drivers/pcmcia/sa1111_generic.h

@@ -10,6 +10,6 @@ extern void sa1111_pcmcia_socket_suspend(struct soc_pcmcia_socket *);
 
 extern int pcmcia_badge4_init(struct device *);
 extern int pcmcia_jornada720_init(struct device *);
-extern int pcmcia_lubbock_init(struct device *);
+extern int pcmcia_lubbock_init(struct sa1111_dev *);
 extern int pcmcia_neponset_init(struct sa1111_dev *);
 

drivers/serial/pxa.c

@@ -33,7 +33,6 @@
 #include <linux/sysrq.h>
 #include <linux/serial_reg.h>
 #include <linux/circ_buf.h>
-#include <linux/serial.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 
@@ -386,9 +385,6 @@ static int serial_pxa_startup(struct uart_port *port)
 	if (retval)
 		return retval;
 
-	CKEN |= up->cken;
-	udelay(1);
-
 	/*
 	 * Clear the FIFO buffers and disable them.
 	 * (they will be reenabled in set_termios())
@@ -461,8 +457,6 @@ static void serial_pxa_shutdown(struct uart_port *port)
 				  UART_FCR_CLEAR_RCVR |
 				  UART_FCR_CLEAR_XMIT);
 	serial_out(up, UART_FCR, 0);
-
-	CKEN &= ~up->cken;
 }
 
 static void
@@ -576,10 +570,14 @@ static void
 serial_pxa_pm(struct uart_port *port, unsigned int state,
 	      unsigned int oldstate)
 {
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
 	if (state) {
 		/* sleep */
+		CKEN &= ~up->cken;
 	} else {
 		/* wake */
+		CKEN |= up->cken;
+		udelay(1);
 	}
 }
 
@@ -760,13 +758,12 @@ static struct uart_pxa_port serial_pxa_ports[] = {
 	.cken	= CKEN6_FFUART,
 	.port	= {
 		.type		= PORT_PXA,
-		.iotype		= SERIAL_IO_MEM,
+		.iotype		= UPIO_MEM,
 		.membase	= (void *)&FFUART,
 		.mapbase	= __PREG(FFUART),
 		.irq		= IRQ_FFUART,
 		.uartclk	= 921600 * 16,
 		.fifosize	= 64,
-		.flags		= ASYNC_SKIP_TEST,
 		.ops		= &serial_pxa_pops,
 		.line		= 0,
 	},
@@ -775,13 +772,12 @@ static struct uart_pxa_port serial_pxa_ports[] = {
 	.cken	= CKEN7_BTUART,
 	.port	= {
 		.type		= PORT_PXA,
-		.iotype		= SERIAL_IO_MEM,
+		.iotype		= UPIO_MEM,
 		.membase	= (void *)&BTUART,
 		.mapbase	= __PREG(BTUART),
 		.irq		= IRQ_BTUART,
 		.uartclk	= 921600 * 16,
 		.fifosize	= 64,
-		.flags		= ASYNC_SKIP_TEST,
 		.ops		= &serial_pxa_pops,
 		.line		= 1,
 	},
@@ -790,13 +786,12 @@ static struct uart_pxa_port serial_pxa_ports[] = {
 	.cken	= CKEN5_STUART,
 	.port	= {
 		.type		= PORT_PXA,
-		.iotype		= SERIAL_IO_MEM,
+		.iotype		= UPIO_MEM,
 		.membase	= (void *)&STUART,
 		.mapbase	= __PREG(STUART),
 		.irq		= IRQ_STUART,
 		.uartclk	= 921600 * 16,
 		.fifosize	= 64,
-		.flags		= ASYNC_SKIP_TEST,
 		.ops		= &serial_pxa_pops,
 		.line		= 2,
 	},
@@ -830,6 +825,10 @@ static int __init serial_pxa_init(void)
 
 static void __exit serial_pxa_exit(void)
 {
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(serial_pxa_ports); i++)
+		uart_remove_one_port(&serial_pxa_reg, &serial_pxa_ports[i].port);
 	uart_unregister_driver(&serial_pxa_reg);
 }
 

drivers/usb/gadget/pxa2xx_udc.c

@@ -51,6 +51,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
+#include <asm/mach-types.h>
 #include <asm/unaligned.h>
 #include <asm/hardware.h>
 

drivers/video/pxafb.c

@@ -153,7 +153,7 @@ pxafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 		 * 12 or 16-bit True Colour.  We encode the RGB value
 		 * according to the RGB bitfield information.
 		 */
-		if (regno <= 16) {
+		if (regno < 16) {
 			u32 *pal = fbi->fb.pseudo_palette;
 
 			val  = chan_to_field(red, &fbi->fb.var.red);
@@ -448,7 +448,7 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *
 {
 	struct pxafb_lcd_reg new_regs;
 	u_long flags;
-	u_int pcd = get_pcd(var->pixclock);
+	u_int lines_per_panel, pcd = get_pcd(var->pixclock);
 
 	DPRINTK("Configuring PXA LCD\n");
 
@@ -509,8 +509,16 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *
 		LCCR1_BegLnDel(var->left_margin) +
 		LCCR1_EndLnDel(var->right_margin);
 
+	/*
+	 * If we have a dual scan LCD, we need to halve
+	 * the YRES parameter.
+	 */
+	lines_per_panel = var->yres;
+	if (fbi->lccr0 & LCCR0_SDS)
+		lines_per_panel /= 2;
+
 	new_regs.lccr2 =
-		LCCR2_DisHght(var->yres) +
+		LCCR2_DisHght(lines_per_panel) +
 		LCCR2_VrtSnchWdth(var->vsync_len) +
 		LCCR2_BegFrmDel(var->upper_margin) +
 		LCCR2_EndFrmDel(var->lower_margin);
@@ -540,9 +548,7 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *
 	fbi->dmadesc_fbhigh_dma = fbi->palette_dma - 2*16;
 	fbi->dmadesc_palette_dma = fbi->palette_dma - 1*16;
 
-	#define BYTES_PER_PANEL ((fbi->lccr0 & LCCR0_SDS) == LCCR0_Dual ? \
-                                (var->xres * var->yres * var->bits_per_pixel / 8 / 2) : \
-                                (var->xres * var->yres * var->bits_per_pixel / 8))
+#define BYTES_PER_PANEL (lines_per_panel * fbi->fb.fix.line_length)
 
 	/* populate descriptors */
 	fbi->dmadesc_fblow_cpu->fdadr = fbi->dmadesc_fblow_dma;
@@ -733,8 +739,7 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
 
 	LCSR = 0xffffffff;	/* Clear LCD Status Register */
 	LCCR0 &= ~LCCR0_LDM;	/* Enable LCD Disable Done Interrupt */
-	//TODO?enable_irq(IRQ_LCD);  /* Enable LCD IRQ */
-	LCCR0 &= ~LCCR0_ENB;	/* Disable LCD Controller */
+	LCCR0 |= LCCR0_DIS;	/* Disable LCD Controller */
 
 	schedule_timeout(20 * HZ / 1000);
 	remove_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -1137,25 +1142,25 @@ static int __init pxafb_parse_options(struct device *dev, char *options)
 				}
                 } else if (!strncmp(this_opt, "pixclock:", 9)) {
                         inf->pixclock = simple_strtoul(this_opt+9, NULL, 0);
-			dev_info(dev, "override pixclock: %uld\n", inf->pixclock);
+			dev_info(dev, "override pixclock: %u\n", inf->pixclock);
                 } else if (!strncmp(this_opt, "left:", 5)) {
                         inf->left_margin = simple_strtoul(this_opt+5, NULL, 0);
-			dev_info(dev, "override left: %d\n", inf->left_margin);
+			dev_info(dev, "override left: %u\n", inf->left_margin);
                 } else if (!strncmp(this_opt, "right:", 6)) {
                         inf->right_margin = simple_strtoul(this_opt+6, NULL, 0);
-			dev_info(dev, "override right: %d\n", inf->right_margin);
+			dev_info(dev, "override right: %u\n", inf->right_margin);
                 } else if (!strncmp(this_opt, "upper:", 6)) {
                         inf->upper_margin = simple_strtoul(this_opt+6, NULL, 0);
-			dev_info(dev, "override upper: %d\n", inf->upper_margin);
+			dev_info(dev, "override upper: %u\n", inf->upper_margin);
                 } else if (!strncmp(this_opt, "lower:", 6)) {
                         inf->lower_margin = simple_strtoul(this_opt+6, NULL, 0);
-			dev_info(dev, "override lower: %d\n", inf->lower_margin);
+			dev_info(dev, "override lower: %u\n", inf->lower_margin);
                 } else if (!strncmp(this_opt, "hsynclen:", 9)) {
                         inf->hsync_len = simple_strtoul(this_opt+9, NULL, 0);
-			dev_info(dev, "override hsynclen: %d\n", inf->hsync_len);
+			dev_info(dev, "override hsynclen: %u\n", inf->hsync_len);
                 } else if (!strncmp(this_opt, "vsynclen:", 9)) {
                         inf->vsync_len = simple_strtoul(this_opt+9, NULL, 0);
-			dev_info(dev, "override vsynclen: %d\n", inf->vsync_len);
+			dev_info(dev, "override vsynclen: %u\n", inf->vsync_len);
                 } else if (!strncmp(this_opt, "hsync:", 6)) {
                         if ( simple_strtoul(this_opt+6, NULL, 0) == 0 ) {
 				dev_info(dev, "override hsync: Active Low\n");

include/asm-arm/arch-ixp4xx/uncompress.h

@@ -48,7 +48,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	/*
 	 * Coyote only has UART2 connected
 	 */
-	if (__machine_arch_type == MACH_TYPE_ADI_COYOTE)
+	if (machine_is_adi_coyote())
 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
 	else
 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;

include/asm-arm/arch-lh7a40x/hardware.h

@@ -13,8 +13,6 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include <asm/mach-types.h>
-
 #define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
 #define io_v2p(x) (             (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
 

include/asm-arm/arch-omap/hardware.h

@@ -40,7 +40,6 @@
 #ifndef __ASSEMBLER__
 #include <asm/types.h>
 #endif
-#include <asm/mach-types.h>
 
 /*
  * ----------------------------------------------------------------------------

include/asm-arm/arch-omap/uncompress.h

@@ -20,7 +20,6 @@
 #include <linux/config.h>
 #include <linux/types.h>
 #include <linux/serial_reg.h>
-#include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/arch/serial.h>
 

include/asm-arm/arch-pxa/hardware.h

@@ -13,9 +13,6 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include <asm/mach-types.h>
-
-
 /*
  * We requires absolute addresses.
  */

include/asm-arm/arch-pxa/lubbock.h

@@ -35,3 +35,6 @@
 #define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
 #define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
 
+#ifndef __ASSEMBLY__
+extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
+#endif

include/asm-arm/hardware/sa1111.h

@@ -405,22 +405,6 @@
 #define GPIO_C6		(1 << 22)
 #define GPIO_C7		(1 << 23)
 
-#define PA_DDR		__CCREG(0x1000)
-#define PA_DRR		__CCREG(0x1004)
-#define PA_DWR		__CCREG(0x1004)
-#define PA_SDR		__CCREG(0x1008)
-#define PA_SSR		__CCREG(0x100c)
-#define PB_DDR		__CCREG(0x1010)
-#define PB_DRR		__CCREG(0x1014)
-#define PB_DWR		__CCREG(0x1014)
-#define PB_SDR		__CCREG(0x1018)
-#define PB_SSR		__CCREG(0x101c)
-#define PC_DDR		__CCREG(0x1020)
-#define PC_DRR		__CCREG(0x1024)
-#define PC_DWR		__CCREG(0x1024)
-#define PC_SDR		__CCREG(0x1028)
-#define PC_SSR		__CCREG(0x102c)
-
 /*
  * Interrupt Controller
  *

include/asm-arm/system.h

@@ -137,22 +137,48 @@ extern unsigned int user_debug;
 #define set_wmb(var, value) do { var = value; wmb(); } while (0)
 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
 
-#define prepare_to_switch()    do { } while(0)
+#ifdef CONFIG_SMP
+/*
+ * Define our own context switch locking.  This allows us to enable
+ * interrupts over the context switch, otherwise we end up with high
+ * interrupt latency.  The real problem area is switch_mm() which may
+ * do a full cache flush.
+ */
+#define prepare_arch_switch(rq,next)					\
+do {									\
+	spin_lock(&(next)->switch_lock);				\
+	spin_unlock_irq(&(rq)->lock);					\
+} while (0)
+
+#define finish_arch_switch(rq,prev)					\
+	spin_unlock(&(prev)->switch_lock)
+
+#define task_running(rq,p)						\
+	((rq)->curr == (p) || spin_is_locked(&(p)->switch_lock))
+#else
+/*
+ * Our UP-case is more simple, but we assume knowledge of how
+ * spin_unlock_irq() and friends are implemented.  This avoids
+ * us needlessly decrementing and incrementing the preempt count.
+ */
+#define prepare_arch_switch(rq,next)	local_irq_enable()
+#define finish_arch_switch(rq,prev)	spin_unlock(&(rq)->lock)
+#define task_running(rq,p)		((rq)->curr == (p))
+#endif
 
 /*
  * switch_to(prev, next) should switch from task `prev' to `next'
- * `prev' will never be the same as `next'.
- * The `mb' is to tell GCC not to cache `current' across this call.
+ * `prev' will never be the same as `next'.  schedule() itself
+ * contains the memory barrier to tell GCC not to cache `current'.
  */
 struct thread_info;
 struct task_struct;
 extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
 
-#define switch_to(prev,next,last)						\
-	do {									\
-		last = __switch_to(prev,prev->thread_info,next->thread_info);	\
-		mb();								\
-	} while (0)
+#define switch_to(prev,next,last)					\
+do {									\
+	last = __switch_to(prev,prev->thread_info,next->thread_info);	\
+} while (0)
 
 /*
  * CPU interrupt mask handling.

include/asm-arm/unistd.h

@@ -454,6 +454,7 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_TIME
 #define __ARCH_WANT_SYS_UTIME
 #define __ARCH_WANT_SYS_SOCKETCALL