[PATCH] M68k RTC updates

M68k: Use genrtc on all m68k platforms

arch/m68k/Kconfig

@@ -1126,37 +1126,8 @@ config SOFT_WATCHDOG
 	  <file:Documentation/modules.txt>. The module will be called
 	  softdog.
 
-config RTC
-	bool "Enhanced Real Time Clock Support"
-	depends on ATARI
-	---help---
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock (or hardware clock) built
-	  into your computer.
-
-	  Every PC has such a clock built in. It can be used to generate
-	  signals from as low as 1Hz up to 8192Hz, and can also be used
-	  as a 24 hour alarm. It reports status information via the file
-	  /proc/driver/rtc and its behaviour is set by various ioctls on
-	  /dev/rtc.
-
-	  If you run Linux on a multiprocessor machine and said Y to
-	  "Symmetric Multi Processing" above, you should say Y here to read
-	  and set the RTC in an SMP compatible fashion.
-
-	  If you think you have a use for such a device (such as periodic data
-	  sampling), then say Y here, and read <file:Documentation/rtc.txt>
-	  for details.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module is called rtc. If you want to compile it as a module,
-	  say M here and read <file:Documentation/modules.txt>.
-
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation" if !SUN3
-	depends on !ATARI
 	default y if SUN3
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with

arch/m68k/atari/time.c

@@ -17,7 +17,7 @@
 #include <linux/rtc.h>
 #include <linux/bcd.h>
 
-#include <asm/rtc.h>
+#include <asm/atariints.h>
 
 void __init
 atari_sched_init(irqreturn_t (*timer_routine)(int, void *, struct pt_regs *))

include/asm-m68k/mc146818rtc.h

@@ -4,37 +4,12 @@
 #ifndef _ASM_MC146818RTC_H
 #define _ASM_MC146818RTC_H
 
-#include <linux/config.h>
-#include <asm/atarihw.h>
-
 #ifdef CONFIG_ATARI
 /* RTC in Atari machines */
 
 #include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/io.h>
-#define RTC_HAS_IRQ	(ATARIHW_PRESENT(TT_MFP))
-#define RTC_IRQ 	IRQ_TT_MFP_RTC
-#define RTC_IRQ_FLAGS	IRQ_TYPE_FAST
-#define RTC_PORT(x)	(TT_RTC_BAS + 2*(x))
-#define RTC_ALWAYS_BCD	0	/* TOS uses binary mode, Linux should be able
-				 * to deal with both modes */
 
-#define RTC_CHECK_DRIVER_INIT() (MACH_IS_ATARI && ATARIHW_PRESENT(TT_CLK))
-#define RTC_MACH_INIT()							\
-    do {								\
-	epoch = atari_rtc_year_offset + 1900;				\
-	if (RTC_HAS_IRQ)						\
-	    /* select RTC int on H->L edge */				\
-	    tt_mfp.active_edge &= ~0x40;				\
-    } while(0)
-#define RTC_MACH_EXIT()
-
-/* On Atari, the year was stored with base 1970 in old TOS versions (before
- * 3.06). Later, Atari recognized that this broke leap year recognition, and
- * changed the base to 1968. Medusa and Hades always use the new version. */
-#define RTC_CENTURY_SWITCH	-1	/* no century switch */
-#define RTC_MINYEAR		epoch
+#define RTC_PORT(x)	(TT_RTC_BAS + 2*(x))
 
 #define CMOS_READ(addr) ({ \
 atari_outb_p((addr),RTC_PORT(0)); \