Commit e2a296ee authored by Linas Vepstas's avatar Linas Vepstas Committed by Paul Mackerras

[PATCH] powerpc: PCI hotplug common code elimination

20-rpaphp-eeh-cleanup.patch

This patch move some code from the rpaphp directory, to the powerpc
directory, where it should have been all along (Among other things, I
need it in the powerpc directory for the PCI error recovery.)

Please note that patch affects TWO maintainers: Paul, after applying
the powerpc part, please ask that GregKH appli the PCI part. It is safe
to have the powerpc part go in first. It would be bad to have the
PCI part go in first.
Signed-off-by: default avatarLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 74761bb5
...@@ -1093,6 +1093,15 @@ void eeh_add_device_early(struct device_node *dn) ...@@ -1093,6 +1093,15 @@ void eeh_add_device_early(struct device_node *dn)
} }
EXPORT_SYMBOL_GPL(eeh_add_device_early); EXPORT_SYMBOL_GPL(eeh_add_device_early);
void eeh_add_device_tree_early(struct device_node *dn)
{
struct device_node *sib;
for (sib = dn->child; sib; sib = sib->sibling)
eeh_add_device_tree_early(sib);
eeh_add_device_early(dn);
}
EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
/** /**
* eeh_add_device_late - perform EEH initialization for the indicated pci device * eeh_add_device_late - perform EEH initialization for the indicated pci device
* @dev: pci device for which to set up EEH * @dev: pci device for which to set up EEH
...@@ -1147,6 +1156,23 @@ void eeh_remove_device(struct pci_dev *dev) ...@@ -1147,6 +1156,23 @@ void eeh_remove_device(struct pci_dev *dev)
} }
EXPORT_SYMBOL_GPL(eeh_remove_device); EXPORT_SYMBOL_GPL(eeh_remove_device);
void eeh_remove_bus_device(struct pci_dev *dev)
{
eeh_remove_device(dev);
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
struct pci_bus *bus = dev->subordinate;
struct list_head *ln;
if (!bus)
return;
for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
struct pci_dev *pdev = pci_dev_b(ln);
if (pdev)
eeh_remove_bus_device(pdev);
}
}
}
EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
static int proc_eeh_show(struct seq_file *m, void *v) static int proc_eeh_show(struct seq_file *m, void *v)
{ {
unsigned int cpu; unsigned int cpu;
......
...@@ -57,6 +57,7 @@ void __init pci_addr_cache_build(void); ...@@ -57,6 +57,7 @@ void __init pci_addr_cache_build(void);
* to finish the eeh setup for this device. * to finish the eeh setup for this device.
*/ */
void eeh_add_device_early(struct device_node *); void eeh_add_device_early(struct device_node *);
void eeh_add_device_tree_early(struct device_node *);
void eeh_add_device_late(struct pci_dev *); void eeh_add_device_late(struct pci_dev *);
/** /**
...@@ -71,6 +72,15 @@ void eeh_add_device_late(struct pci_dev *); ...@@ -71,6 +72,15 @@ void eeh_add_device_late(struct pci_dev *);
*/ */
void eeh_remove_device(struct pci_dev *); void eeh_remove_device(struct pci_dev *);
/**
* eeh_remove_device_recursive - undo EEH for device & children.
* @dev: pci device to be removed
*
* As above, this removes the device; it also removes child
* pci devices as well.
*/
void eeh_remove_bus_device(struct pci_dev *);
/** /**
* EEH_POSSIBLE_ERROR() -- test for possible MMIO failure. * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
* *
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment