Commit e2ad2a54 authored by Hans de Goede's avatar Hans de Goede Committed by Mauro Carvalho Chehab

V4L/DVB (8816): gspca: Set disabled ctrls and fix a register pb with ovxxxx in sonixb.

- set some controls as disabled instead of copying the device descr.
- in the ov6650 / 7650 exposure code clamp reg 11 before (instead of after)
  using it to calculate reg 10.
- disable brightness (instead of ignoring it) for the TAS5110.
Signed-off-by: default avatarHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: default avatarJean-Francois Moine <moinejf@free.fr>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 0f523c2f
......@@ -31,9 +31,6 @@ MODULE_LICENSE("GPL");
/* specific webcam descriptor */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
struct sd_desc sd_desc; /* our nctrls differ dependend upon the
sensor, so we use a per cam copy */
atomic_t avg_lum;
unsigned char gain;
......@@ -60,9 +57,8 @@ struct sd {
/* flags used in the device id table */
#define F_GAIN 0x01 /* has gain */
#define F_AUTO 0x02 /* has autogain */
#define F_SIF 0x04 /* sif or vga */
#define F_H18 0x08 /* long (18 b) or short (12 b) frame header */
#define F_SIF 0x02 /* sif or vga */
#define F_H18 0x04 /* long (18 b) or short (12 b) frame header */
#define COMP2 0x8f
#define COMP 0xc7 /* 0x87 //0x07 */
......@@ -95,6 +91,7 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
static struct ctrl sd_ctrls[] = {
#define BRIGHTNESS_IDX 0
{
{
.id = V4L2_CID_BRIGHTNESS,
......@@ -109,6 +106,7 @@ static struct ctrl sd_ctrls[] = {
.set = sd_setbrightness,
.get = sd_getbrightness,
},
#define GAIN_IDX 1
{
{
.id = V4L2_CID_GAIN,
......@@ -124,6 +122,7 @@ static struct ctrl sd_ctrls[] = {
.set = sd_setgain,
.get = sd_getgain,
},
#define EXPOSURE_IDX 2
{
{
.id = V4L2_CID_EXPOSURE,
......@@ -140,6 +139,7 @@ static struct ctrl sd_ctrls[] = {
.set = sd_setexposure,
.get = sd_getexposure,
},
#define AUTOGAIN_IDX 3
{
{
.id = V4L2_CID_AUTOGAIN,
......@@ -155,6 +155,7 @@ static struct ctrl sd_ctrls[] = {
.set = sd_setautogain,
.get = sd_getautogain,
},
#define FREQ_IDX 4
{
{
.id = V4L2_CID_POWER_LINE_FREQUENCY,
......@@ -545,9 +546,6 @@ static void setbrightness(struct gspca_dev *gspca_dev)
goto err;
break;
}
case SENSOR_TAS5110:
/* FIXME figure out howto control brightness on TAS5110 */
break;
}
return;
err:
......@@ -665,6 +663,11 @@ static void setexposure(struct gspca_dev *gspca_dev)
else if (reg11 > 16)
reg11 = 16;
/* In 640x480, if the reg11 has less than 3, the image is
unstable (not enough bandwidth). */
if (gspca_dev->width == 640 && reg11 < 3)
reg11 = 3;
/* frame exposure time in ms = 1000 * reg11 / 30 ->
reg10 = sd->exposure * 2 * reg10_max / (1000 * reg11 / 30) */
reg10 = (sd->exposure * 60 * reg10_max) / (1000 * reg11);
......@@ -678,11 +681,6 @@ static void setexposure(struct gspca_dev *gspca_dev)
else if (reg10 > reg10_max)
reg10 = reg10_max;
/* In 640x480, if the reg11 has less than 3, the image is
unstable (not enough bandwidth). */
if (gspca_dev->width == 640 && reg11 < 3)
reg11 = 3;
/* Write reg 10 and reg11 low nibble */
i2c[1] = sd->sensor_addr;
i2c[3] = reg10;
......@@ -759,23 +757,17 @@ static int sd_config(struct gspca_dev *gspca_dev,
struct cam *cam;
int sif = 0;
/* nctrls depends upon the sensor, so we use a per cam copy */
memcpy(&sd->sd_desc, gspca_dev->sd_desc, sizeof(struct sd_desc));
gspca_dev->sd_desc = &sd->sd_desc;
/* copy the webcam info from the device id */
sd->sensor = (id->driver_info >> 24) & 0xff;
if (id->driver_info & (F_GAIN << 16))
sd->sensor_has_gain = 1;
if (id->driver_info & (F_AUTO << 16))
sd->sd_desc.dq_callback = do_autogain;
if (id->driver_info & (F_SIF << 16))
sif = 1;
if (id->driver_info & (F_H18 << 16))
sd->fr_h_sz = 18; /* size of frame header */
else
sd->fr_h_sz = 12;
sd->sd_desc.nctrls = (id->driver_info >> 8) & 0xff;
gspca_dev->ctrl_dis = (id->driver_info >> 8) & 0xff;
sd->sensor_addr = id->driver_info & 0xff;
cam = &gspca_dev->cam;
......@@ -790,7 +782,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
sd->brightness = BRIGHTNESS_DEF;
sd->gain = GAIN_DEF;
sd->exposure = EXPOSURE_DEF;
sd->autogain = AUTOGAIN_DEF;
if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
sd->autogain = 0; /* Disable do_autogain callback */
else
sd->autogain = AUTOGAIN_DEF;
sd->freq = FREQ_DEF;
return 0;
......@@ -1169,50 +1164,55 @@ static const struct sd_desc sd_desc = {
.close = sd_close,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
.dq_callback = do_autogain,
};
/* -- module initialisation -- */
#define SFCI(sensor, flags, nctrls, i2c_addr) \
#define SFCI(sensor, flags, disable_ctrls, i2c_addr) \
.driver_info = (SENSOR_ ## sensor << 24) \
| ((flags) << 16) \
| ((nctrls) << 8) \
| ((disable_ctrls) << 8) \
| (i2c_addr)
#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
#define NO_FREQ (1 << FREQ_IDX)
#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
static __devinitdata struct usb_device_id device_table[] = {
#ifndef CONFIG_USB_SN9C102
{USB_DEVICE(0x0c45, 0x6001), /* SN9C102 */
SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6005), /* SN9C101 */
SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6007), /* SN9C101 */
SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6009), /* SN9C101 */
SFCI(PAS106, F_SIF, 2, 0)},
SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x600d), /* SN9C101 */
SFCI(PAS106, F_SIF, 2, 0)},
SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
#endif
{USB_DEVICE(0x0c45, 0x6011), /* SN9C101 - SN9C101G */
SFCI(OV6650, F_GAIN|F_AUTO|F_SIF, 5, 0x60)},
SFCI(OV6650, F_GAIN|F_SIF, 0, 0x60)},
#ifndef CONFIG_USB_SN9C102
{USB_DEVICE(0x0c45, 0x6019), /* SN9C101 */
SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
SFCI(OV7630, F_GAIN, 0, 0x21)},
{USB_DEVICE(0x0c45, 0x6024), /* SN9C102 */
SFCI(TAS5130CXX, 0, 2, 0)},
SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6025), /* SN9C102 */
SFCI(TAS5130CXX, 0, 2, 0)},
SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6028), /* SN9C102 */
SFCI(PAS202, 0, 2, 0)},
SFCI(PAS202, 0, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6029), /* SN9C101 */
SFCI(PAS106, F_SIF, 2, 0)},
SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x602c), /* SN9C102 */
SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
SFCI(OV7630, F_GAIN, 0, 0x21)},
{USB_DEVICE(0x0c45, 0x602d), /* SN9C102 */
SFCI(HV7131R, 0, 2, 0)},
SFCI(HV7131R, 0, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x602e), /* SN9C102 */
SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
SFCI(OV7630, F_GAIN, 0, 0x21)},
{USB_DEVICE(0x0c45, 0x60af), /* SN9C103 */
SFCI(PAS202, F_H18, 2, 0)},
SFCI(PAS202, F_H18, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x60b0), /* SN9C103 */
SFCI(OV7630, F_GAIN|F_AUTO|F_H18, 5, 0x21)},
SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)},
#endif
{}
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment