s390/qdio: remove unused sync-after-IRQ infrastructure

The queue processing is fully decoupled from any preceding interrupt,
so we're no longer making any use of the sync-after-IRQ HW capabilities.

And as SIGA-sync is a legacy feature, there's also not much point in
re-designing the driver & qdio-layer code just so that we can
potentially avoid a few syncs. So just remove all the leftover code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

drivers/s390/cio/qdio.h

@@ -130,9 +130,7 @@ struct siga_flag {
 	u8 input:1;
 	u8 output:1;
 	u8 sync:1;
-	u8 sync_after_ai:1;
-	u8 sync_out_after_pci:1;
-	u8:3;
+	u8:5;
 } __attribute__ ((packed));
 
 struct qdio_dev_perf_stat {
@@ -317,10 +315,6 @@ static inline void qdio_deliver_irq(struct qdio_irq *irq)
 #define need_siga_in(q)			(q->irq_ptr->siga_flag.input)
 #define need_siga_out(q)		(q->irq_ptr->siga_flag.output)
 #define need_siga_sync(q)		(unlikely(q->irq_ptr->siga_flag.sync))
-#define need_siga_sync_after_ai(q)	\
-	(unlikely(q->irq_ptr->siga_flag.sync_after_ai))
-#define need_siga_sync_out_after_pci(q)	\
-	(unlikely(q->irq_ptr->siga_flag.sync_out_after_pci))
 
 #define for_each_input_queue(irq_ptr, q, i)		\
 	for (i = 0; i < irq_ptr->nr_input_qs &&		\

drivers/s390/cio/qdio_setup.c

@@ -278,10 +278,6 @@ static void process_ac_flags(struct qdio_irq *irq_ptr, unsigned char qdioac)
 		irq_ptr->siga_flag.output = 1;
 	if (qdioac & AC1_SIGA_SYNC_NEEDED)
 		irq_ptr->siga_flag.sync = 1;
-	if (!(qdioac & AC1_AUTOMATIC_SYNC_ON_THININT))
-		irq_ptr->siga_flag.sync_after_ai = 1;
-	if (!(qdioac & AC1_AUTOMATIC_SYNC_ON_OUT_PCI))
-		irq_ptr->siga_flag.sync_out_after_pci = 1;
 }
 
 static void check_and_setup_qebsm(struct qdio_irq *irq_ptr,
@@ -495,8 +491,7 @@ void qdio_print_subchannel_info(struct qdio_irq *irq_ptr)
 {
 	char s[80];
 
-	snprintf(s, 80, "qdio: %s %s on SC %x using "
-		 "AI:%d QEBSM:%d PRI:%d TDD:%d SIGA:%s%s%s%s%s\n",
+	snprintf(s, 80, "qdio: %s %s on SC %x using AI:%d QEBSM:%d PRI:%d TDD:%d SIGA:%s%s%s\n",
 		 dev_name(&irq_ptr->cdev->dev),
 		 (irq_ptr->qib.qfmt == QDIO_QETH_QFMT) ? "OSA" :
 			((irq_ptr->qib.qfmt == QDIO_ZFCP_QFMT) ? "ZFCP" : "HS"),
@@ -507,9 +502,7 @@ void qdio_print_subchannel_info(struct qdio_irq *irq_ptr)
 		 css_general_characteristics.aif_tdd,
 		 (irq_ptr->siga_flag.input) ? "R" : " ",
 		 (irq_ptr->siga_flag.output) ? "W" : " ",
-		 (irq_ptr->siga_flag.sync) ? "S" : " ",
-		 (irq_ptr->siga_flag.sync_after_ai) ? "A" : " ",
-		 (irq_ptr->siga_flag.sync_out_after_pci) ? "P" : " ");
+		 (irq_ptr->siga_flag.sync) ? "S" : " ");
 	printk(KERN_INFO "%s", s);
 }