power: supply: bq27xxx: fix reporting critical level

The EDV1/SOC1 flag is set when the battery voltage drops below the
threshold set in EEPROM. From observing the capacity_level reported by
the driver, and reading the datasheet, EDV1 remains set even when
EDVF/SOCF gets set. Thus, bq27xxx_battery_capacity_level() never reaches
the CAPACITY_LEVEL_CRITICAL code path, since CAPACITY_LEVEL_LOW takes
precedence.

This commit fixes the issue by swapping the order in which the flags are
tested. It was tested with bq27200 in the Nokia N900.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

drivers/power/supply/bq27xxx_battery.c

@@ -1917,10 +1917,10 @@ static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di,
 	if (di->opts & BQ27XXX_O_ZERO) {
 		if (di->cache.flags & BQ27000_FLAG_FC)
 			level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
-		else if (di->cache.flags & BQ27000_FLAG_EDV1)
-			level = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
 		else if (di->cache.flags & BQ27000_FLAG_EDVF)
 			level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+		else if (di->cache.flags & BQ27000_FLAG_EDV1)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
 		else
 			level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
 	} else if (di->opts & BQ27Z561_O_BITS) {
@@ -1933,10 +1933,10 @@ static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di,
 	} else {
 		if (di->cache.flags & BQ27XXX_FLAG_FC)
 			level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
-		else if (di->cache.flags & BQ27XXX_FLAG_SOC1)
-			level = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
 		else if (di->cache.flags & BQ27XXX_FLAG_SOCF)
 			level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+		else if (di->cache.flags & BQ27XXX_FLAG_SOC1)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
 		else
 			level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
 	}