Commit e2ca690b authored by Paolo Abeni's avatar Paolo Abeni Committed by David S. Miller

ipv4/icmp: redirect messages can use the ingress daddr as source

This patch allows configuring how the source address of ICMP
redirect messages is selected; by default the old behaviour is
retained, while setting icmp_redirects_use_orig_daddr force the
usage of the destination address of the packet that caused the
redirect.

The new behaviour fits closely the RFC 5798 section 8.1.1, and fix the
following scenario:

Two machines are set up with VRRP to act as routers out of a subnet,
they have IPs x.x.x.1/24 and x.x.x.2/24, with VRRP holding on to
x.x.x.254/24.

If a host in said subnet needs to get an ICMP redirect from the VRRP
router, i.e. to reach a destination behind a different gateway, the
source IP in the ICMP redirect is chosen as the primary IP on the
interface that the packet arrived at, i.e. x.x.x.1 or x.x.x.2.

The host will then ignore said redirect, due to RFC 1122 section 3.2.2.2,
and will continue to use the wrong next-op.
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0944d6b5
...@@ -884,8 +884,8 @@ icmp_ignore_bogus_error_responses - BOOLEAN ...@@ -884,8 +884,8 @@ icmp_ignore_bogus_error_responses - BOOLEAN
icmp_errors_use_inbound_ifaddr - BOOLEAN icmp_errors_use_inbound_ifaddr - BOOLEAN
If zero, icmp error messages are sent with the primary address of If zero, icmp error messages except redirects are sent with the primary
the exiting interface. address of the exiting interface.
If non-zero, the message will be sent with the primary address of If non-zero, the message will be sent with the primary address of
the interface that received the packet that caused the icmp error. the interface that received the packet that caused the icmp error.
...@@ -897,8 +897,23 @@ icmp_errors_use_inbound_ifaddr - BOOLEAN ...@@ -897,8 +897,23 @@ icmp_errors_use_inbound_ifaddr - BOOLEAN
then the primary address of the first non-loopback interface that then the primary address of the first non-loopback interface that
has one will be used regardless of this setting. has one will be used regardless of this setting.
The source address selection of icmp redirect messages is controlled by
icmp_errors_use_inbound_ifaddr.
Default: 0 Default: 0
icmp_redirects_use_orig_daddr - BOOLEAN
If zero, icmp redirect messages are sent using the address specified for
other icmp errors by icmp_errors_use_inbound_ifaddr.
If non-zero, the message will be sent with the destination address of
the packet that caused the icmp redirect.
This behaviour is the preferred one on VRRP routers (see RFC 5798
section 8.1.1).
Default: 0
igmp_max_memberships - INTEGER igmp_max_memberships - INTEGER
Change the maximum number of multicast groups we can subscribe to. Change the maximum number of multicast groups we can subscribe to.
Default: 20 Default: 20
......
...@@ -74,6 +74,7 @@ struct netns_ipv4 { ...@@ -74,6 +74,7 @@ struct netns_ipv4 {
int sysctl_icmp_ratelimit; int sysctl_icmp_ratelimit;
int sysctl_icmp_ratemask; int sysctl_icmp_ratemask;
int sysctl_icmp_errors_use_inbound_ifaddr; int sysctl_icmp_errors_use_inbound_ifaddr;
int sysctl_icmp_redirects_use_orig_daddr;
struct local_ports ip_local_ports; struct local_ports ip_local_ports;
......
...@@ -659,7 +659,9 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info) ...@@ -659,7 +659,9 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
*/ */
saddr = iph->daddr; saddr = iph->daddr;
if (!(rt->rt_flags & RTCF_LOCAL)) { if (!((type == ICMP_REDIRECT) &&
net->ipv4.sysctl_icmp_redirects_use_orig_daddr) &&
!(rt->rt_flags & RTCF_LOCAL)) {
struct net_device *dev = NULL; struct net_device *dev = NULL;
rcu_read_lock(); rcu_read_lock();
...@@ -1222,6 +1224,11 @@ static int __net_init icmp_sk_init(struct net *net) ...@@ -1222,6 +1224,11 @@ static int __net_init icmp_sk_init(struct net *net)
net->ipv4.sysctl_icmp_ratemask = 0x1818; net->ipv4.sysctl_icmp_ratemask = 0x1818;
net->ipv4.sysctl_icmp_errors_use_inbound_ifaddr = 0; net->ipv4.sysctl_icmp_errors_use_inbound_ifaddr = 0;
/* Control paramerer - use the daddr of originating packets as saddr
* in redirect messages?
*/
net->ipv4.sysctl_icmp_redirects_use_orig_daddr = 0;
return 0; return 0;
fail: fail:
......
...@@ -817,6 +817,13 @@ static struct ctl_table ipv4_net_table[] = { ...@@ -817,6 +817,13 @@ static struct ctl_table ipv4_net_table[] = {
.mode = 0644, .mode = 0644,
.proc_handler = proc_dointvec .proc_handler = proc_dointvec
}, },
{
.procname = "icmp_redirects_use_orig_daddr",
.data = &init_net.ipv4.sysctl_icmp_redirects_use_orig_daddr,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
{ {
.procname = "icmp_ratelimit", .procname = "icmp_ratelimit",
.data = &init_net.ipv4.sysctl_icmp_ratelimit, .data = &init_net.ipv4.sysctl_icmp_ratelimit,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment