usb: typec: tcpci_rt1711h: Convert enum->pointer for data in the match tables

Currently did varaible is used for HW differences between the devices which
complicates the code by adding checks.

Therefore it is better to convert enum->pointer for data match and extend
match support for both ID and OF tables by using i2c_get_match_data().

Add struct rt1711h_chip_info with did variable and replace did->info in
struct rt1711h_chip. Later patch will add more hw differences to
struct rt1711h_chip_info and avoid checking did for HW differences.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230906080619.36930-3-biju.das.jz@bp.renesas.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/typec/tcpm/tcpci_rt1711h.c

@@ -51,13 +51,17 @@
 /* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */
 #define BMCIO_RXDZEN	BIT(0)
 
+struct rt1711h_chip_info {
+	u16 did;
+};
+
 struct rt1711h_chip {
 	struct tcpci_data data;
 	struct tcpci *tcpci;
 	struct device *dev;
 	struct regulator *vbus;
+	const struct rt1711h_chip_info *info;
 	bool src_en;
-	u16 did;
 };
 
 static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -105,7 +109,7 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 		return ret;
 
 	/* Enable PD30 extended message for RT1715 */
-	if (chip->did == RT1715_DID) {
+	if (chip->info->did == RT1715_DID) {
 		ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
 					 RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
 		if (ret < 0)
@@ -200,7 +204,7 @@ static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
 	if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
 	    (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
 		rxdz_en = BMCIO_RXDZEN;
-		if (chip->did == RT1715_DID)
+		if (chip->info->did == RT1715_DID)
 			rxdz_sel = RT1711H_BMCIO_RXDZSEL;
 		else
 			rxdz_sel = 0;
@@ -319,7 +323,7 @@ static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *c
 	ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
 	if (ret < 0)
 		return ret;
-	if (ret != chip->did) {
+	if (ret != chip->info->did) {
 		dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
 		return -ENODEV;
 	}
@@ -336,7 +340,7 @@ static int rt1711h_probe(struct i2c_client *client)
 	if (!chip)
 		return -ENOMEM;
 
-	chip->did = (size_t)device_get_match_data(&client->dev);
+	chip->info = i2c_get_match_data(client);
 
 	ret = rt1711h_check_revision(client, chip);
 	if (ret < 0) {
@@ -391,17 +395,25 @@ static void rt1711h_remove(struct i2c_client *client)
 	tcpci_unregister_port(chip->tcpci);
 }
 
+static const struct rt1711h_chip_info rt1711h = {
+	.did = RT1711H_DID,
+};
+
+static const struct rt1711h_chip_info rt1715 = {
+	.did = RT1715_DID,
+};
+
 static const struct i2c_device_id rt1711h_id[] = {
-	{ "rt1711h", 0 },
-	{ "rt1715", 0 },
+	{ "rt1711h", (kernel_ulong_t)&rt1711h },
+	{ "rt1715", (kernel_ulong_t)&rt1715 },
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, rt1711h_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id rt1711h_of_match[] = {
-	{ .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
-	{ .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
+	{ .compatible = "richtek,rt1711h", .data = &rt1711h },
+	{ .compatible = "richtek,rt1715", .data = &rt1715 },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rt1711h_of_match);