staging: rtl8188eu: remove unused include/ieee80211_ext.h

This file is not used for the driver compiling
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/include/ieee80211_ext.h

-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- *
- ******************************************************************************/
-#ifndef __IEEE80211_EXT_H
-#define __IEEE80211_EXT_H
-
-#include <osdep_service.h>
-#include <drv_types.h>
-
-#define WMM_OUI_TYPE 2
-#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0
-#define WMM_OUI_SUBTYPE_PARAMETER_ELEMENT 1
-#define WMM_OUI_SUBTYPE_TSPEC_ELEMENT 2
-#define WMM_VERSION 1
-
-#define WPA_PROTO_WPA BIT(0)
-#define WPA_PROTO_RSN BIT(1)
-
-#define WPA_KEY_MGMT_IEEE8021X BIT(0)
-#define WPA_KEY_MGMT_PSK BIT(1)
-#define WPA_KEY_MGMT_NONE BIT(2)
-#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3)
-#define WPA_KEY_MGMT_WPA_NONE BIT(4)
-
-
-#define WPA_CAPABILITY_PREAUTH BIT(0)
-#define WPA_CAPABILITY_MGMT_FRAME_PROTECTION BIT(6)
-#define WPA_CAPABILITY_PEERKEY_ENABLED BIT(9)
-
-
-#define PMKID_LEN 16
-
-
-struct wpa_ie_hdr {
-	u8 elem_id;
-	u8 len;
-	u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */
-	u8 version[2]; /* little endian */
-} __packed;
-
-struct rsn_ie_hdr {
-	u8 elem_id; /* WLAN_EID_RSN */
-	u8 len;
-	u8 version[2]; /* little endian */
-} __packed;
-
-struct wme_ac_parameter {
-#if defined(__LITTLE_ENDIAN)
-	/* byte 1 */
-	u8	aifsn:4,
-		acm:1,
-		aci:2,
-		reserved:1;
-
-	/* byte 2 */
-	u8	eCWmin:4,
-		eCWmax:4;
-#elif defined(__BIG_ENDIAN)
-	/* byte 1 */
-	u8	reserved:1,
-		aci:2,
-		acm:1,
-		aifsn:4;
-
-	/* byte 2 */
-	u8	eCWmax:4,
-		eCWmin:4;
-#else
-#error	"Please fix <endian.h>"
-#endif
-
-	/* bytes 3 & 4 */
-	u16 txopLimit;
-} __packed;
-
-struct wme_parameter_element {
-	/* required fields for WME version 1 */
-	u8 oui[3];
-	u8 oui_type;
-	u8 oui_subtype;
-	u8 version;
-	u8 acInfo;
-	u8 reserved;
-	struct wme_ac_parameter ac[4];
-
-} __packed;
-
-#define WPA_PUT_LE16(a, val)			\
-	do {					\
-		(a)[1] = ((u16)(val)) >> 8;	\
-		(a)[0] = ((u16)(val)) & 0xff;	\
-	} while (0)
-
-#define WPA_PUT_BE32(a, val)					\
-	do {							\
-		(a)[0] = (u8)((((u32) (val)) >> 24) & 0xff);	\
-		(a)[1] = (u8)((((u32) (val)) >> 16) & 0xff);	\
-		(a)[2] = (u8)((((u32) (val)) >> 8) & 0xff);	\
-		(a)[3] = (u8)(((u32) (val)) & 0xff);		\
-	} while (0)
-
-#define WPA_PUT_LE32(a, val)					\
-	do {							\
-		(a)[3] = (u8)((((u32) (val)) >> 24) & 0xff);	\
-		(a)[2] = (u8)((((u32) (val)) >> 16) & 0xff);	\
-		(a)[1] = (u8)((((u32) (val)) >> 8) & 0xff);	\
-		(a)[0] = (u8)(((u32) (val)) & 0xff);		\
-	} while (0)
-
-#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *)(a), (val))
-
-/* Action category code */
-enum ieee80211_category {
-	WLAN_CATEGORY_SPECTRUM_MGMT = 0,
-	WLAN_CATEGORY_QOS = 1,
-	WLAN_CATEGORY_DLS = 2,
-	WLAN_CATEGORY_BACK = 3,
-	WLAN_CATEGORY_HT = 7,
-	WLAN_CATEGORY_WMM = 17,
-};
-
-/* SPECTRUM_MGMT action code */
-enum ieee80211_spectrum_mgmt_actioncode {
-	WLAN_ACTION_SPCT_MSR_REQ = 0,
-	WLAN_ACTION_SPCT_MSR_RPRT = 1,
-	WLAN_ACTION_SPCT_TPC_REQ = 2,
-	WLAN_ACTION_SPCT_TPC_RPRT = 3,
-	WLAN_ACTION_SPCT_CHL_SWITCH = 4,
-	WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
-};
-
-/* BACK action code */
-enum ieee80211_back_actioncode {
-	WLAN_ACTION_ADDBA_REQ = 0,
-	WLAN_ACTION_ADDBA_RESP = 1,
-	WLAN_ACTION_DELBA = 2,
-};
-
-/* HT features action code */
-enum ieee80211_ht_actioncode {
-	WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
-	WLAN_ACTION_SM_PS = 1,
-	WLAN_ACTION_PSPM = 2,
-	WLAN_ACTION_PCO_PHASE = 3,
-	WLAN_ACTION_MIMO_CSI_MX = 4,
-	WLAN_ACTION_MIMO_NONCP_BF = 5,
-	WLAN_ACTION_MIMP_CP_BF = 6,
-	WLAN_ACTION_ASEL_INDICATES_FB = 7,
-	WLAN_ACTION_HI_INFO_EXCHG = 8,
-};
-
-/* BACK (block-ack) parties */
-enum ieee80211_back_parties {
-	WLAN_BACK_RECIPIENT = 0,
-	WLAN_BACK_INITIATOR = 1,
-	WLAN_BACK_TIMER = 2,
-};
-
-struct ieee80211_mgmt {
-	u16 frame_control;
-	u16 duration;
-	u8 da[6];
-	u8 sa[6];
-	u8 bssid[6];
-	u16 seq_ctrl;
-	union {
-		struct {
-			u16 auth_alg;
-			u16 auth_transaction;
-			u16 status_code;
-			/* possibly followed by Challenge text */
-			u8 variable[0];
-		}  __packed auth;
-		struct {
-			u16 reason_code;
-		}  __packed deauth;
-		struct {
-			u16 capab_info;
-			u16 listen_interval;
-			/* followed by SSID and Supported rates */
-			u8 variable[0];
-		}  __packed assoc_req;
-		struct {
-			u16 capab_info;
-			u16 status_code;
-			u16 aid;
-			/* followed by Supported rates */
-			u8 variable[0];
-		}  __packed assoc_resp, reassoc_resp;
-		struct {
-			u16 capab_info;
-			u16 listen_interval;
-			u8 current_ap[6];
-			/* followed by SSID and Supported rates */
-			u8 variable[0];
-		}  __packed reassoc_req;
-		struct {
-			u16 reason_code;
-		}  __packed disassoc;
-		struct {
-			__le64 timestamp;
-			u16 beacon_int;
-			u16 capab_info;
-			/* followed by some of SSID, Supported rates,
-			 * FH Params, DS Params, CF Params, IBSS Params, TIM */
-			u8 variable[0];
-		}  __packed beacon;
-		struct {
-			/* only variable items: SSID, Supported rates */
-			u8 variable[0];
-		}  __packed probe_req;
-		struct {
-			__le64 timestamp;
-			u16 beacon_int;
-			u16 capab_info;
-			/* followed by some of SSID, Supported rates,
-			 * FH Params, DS Params, CF Params, IBSS Params */
-			u8 variable[0];
-		}  __packed probe_resp;
-		struct {
-			u8 category;
-			union {
-				struct {
-					u8 action_code;
-					u8 dialog_token;
-					u8 status_code;
-					u8 variable[0];
-				}  __packed wme_action;
-				struct {
-					u8 action_code;
-					u8 dialog_token;
-					u16 capab;
-					u16 timeout;
-					u16 start_seq_num;
-				}  __packed addba_req;
-				struct {
-					u8 action_code;
-					u8 dialog_token;
-					u16 status;
-					u16 capab;
-					u16 timeout;
-				}  __packed addba_resp;
-				struct {
-					u8 action_code;
-					u16 params;
-					u16 reason_code;
-				}  __packed delba;
-				structi {
-					u8 action_code;
-					/* capab_info for open and confirm,
-					 * reason for close
-					 */
-					u16 aux;
-					/* Followed in plink_confirm by status
-					 * code, AID and supported rates,
-					 * and directly by supported rates in
-					 * plink_open and plink_close
-					 */
-					u8 variable[0];
-				}  __packed plink_action;
-				struct{
-					u8 action_code;
-					u8 variable[0];
-				}  __packed mesh_action;
-			} __packed u;
-		}  __packed action;
-	} __packed u;
-} __packed;
-
-/* mgmt header + 1 byte category code */
-#define IEEE80211_MIN_ACTION_SIZE				\
-	 FIELD_OFFSET(struct ieee80211_mgmt, u.action.u)
-
-#endif