Merge tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control bulk updates from Linus Walleij:
 "Core changes:

   - New standard enumerator and corresponding device tree bindings for
     output impedance pin configuration. (Implemented and used in the
     Renesas rzg2l driver.)

   - Cleanup of Kconfig and Makefile to be somewhat orderly and
     alphabetic.

  New drivers:

   - Samsung Exynos 7885 pin controller.

   - Ocelot LAN966x pin controller.

   - Qualcomm SDX65 pin controller.

   - Qualcomm SM8450 pin controller.

   - Qualcomm PM8019, PM8226 and PM2250 pin controllers.

   - NXP/Freescale i.MXRT1050 pin controller.

   - Intel Thunder Bay pin controller.

  Enhancements:

   - Introduction of the string library helper function
     "kasprintf_strarray()" and subsequent use in Rockchip, ST and
     Armada pin control drivers, as well as the GPIO mockup driver.

   - The Ocelot pin controller has been extensively rewritten to use
     regmap and other modern kernel infrastructure.

   - The Microchip SGPIO driver has been converted to use regmap.

   - The SPEAr driver had been converted to use regmap.

   - Substantial cleanups and janitorial on the Apple pin control driver
     that was merged for v5.16.

   - Janitorial to remove of_node assignments in the GPIO portions that
     anyway get this handled in the GPIO core.

   - Minor cleanups and improvements in several pin controllers"

* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
  pinctrl: imx: fix assigning groups names
  dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
  pinctrl: bcm: ns: use generic groups & functions helpers
  pinctrl: imx: fix allocation result check
  pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
  pinctrl: Propagate firmware node from a parent device
  dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
  pinctrl: add one more "const" for generic function groups
  pinctrl: keembay: rework loops looking for groups names
  pinctrl: keembay: comment process of building functions a bit
  pinctrl: imx: prepare for making "group_names" in "function_desc" const
  ARM: dts: gpio-ranges property is now required
  pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
  pinctrl: Get rid of duplicate of_node assignment in the drivers
  pinctrl-sunxi: don't call pinctrl_gpio_direction()
  pinctrl-bcm2835: don't call pinctrl_gpio_direction()
  pinctrl: bcm2835: Silence uninit warning
  pinctrl: Sort Kconfig and Makefile entries alphabetically
  pinctrl: Add Intel Thunder Bay pinctrl driver
  dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
  ...

Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml

@@ -184,6 +184,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml

@@ -147,6 +147,7 @@ allOf:
   # boards are defining it at the moment so it would generate a lot of
   # warnings.
 
+  - $ref: "pinctrl.yaml#"
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml

@@ -72,6 +72,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml

@@ -50,6 +50,9 @@ patternProperties:
                   TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
                   VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 

Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml

@@ -62,6 +62,9 @@ patternProperties:
                   USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
                   VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - aspeed,external-nodes

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml

@@ -83,6 +83,9 @@ patternProperties:
                   UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
                   WDTRST3, WDTRST4]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 

Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml

@@ -37,6 +37,9 @@ patternProperties:
         enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
                 gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml

@@ -41,6 +41,9 @@ patternProperties:
                 vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
                 vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml

@@ -36,6 +36,9 @@ patternProperties:
                 gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
                 usb_port1 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml

@@ -34,6 +34,9 @@ patternProperties:
         enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
                 led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml

@@ -41,6 +41,9 @@ patternProperties:
                 gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
                 gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml

@@ -42,6 +42,9 @@ patternProperties:
                 gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
                 gpio31, uart1_grp ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml

@@ -53,6 +53,7 @@ patternProperties:
     additionalProperties: false
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - if:
       properties:
         compatible:
@@ -77,7 +78,7 @@ additionalProperties: false
 
 examples:
   - |
-    pin-controller@1800c1c0 {
+    pinctrl@1800c1c0 {
         compatible = "brcm,bcm4708-pinmux";
         reg = <0x1800c1c0 0x24>;
         reg-names = "cru_gpio_control";

Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml

@@ -137,6 +137,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -151,9 +154,9 @@ examples:
     #include <dt-bindings/clock/k210-clk.h>
     #include <dt-bindings/reset/k210-rst.h>
 
-    fpioa: pinmux@502B0000 {
+    fpioa: pinmux@502b0000 {
       compatible = "canaan,k210-fpioa";
-      reg = <0x502B0000 0x100>;
+      reg = <0x502b0000 0x100>;
       clocks = <&sysclk K210_CLK_FPIOA>,
                <&sysclk K210_CLK_APB0>;
       clock-names = "ref", "pclk";

Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml

@@ -181,6 +181,9 @@ properties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - gpio-controller

Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml

@@ -117,6 +117,9 @@ properties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - pinctrl-0
   - pinctrl-names

Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml

@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml

@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml

@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml

@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml

@@ -56,6 +56,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMXRT1050 IOMUX Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <include/dt-bindings/pinctrl/pins-imxrt1050.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MXRT1050 Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: iomuxc@401f8000 {
+        compatible = "fsl,imxrt1050-iomuxc";
+        reg = <0x401f8000 0x4000>;
+
+        pinctrl_lpuart1: lpuart1grp {
+            fsl,pins =
+              <0x0EC 0x2DC 0x000 0x2 0x0	0xf1>,
+              <0x0F0 0x2E0 0x000 0x2 0x0	0xf1>;
+        };
+    };

Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml

@@ -28,9 +28,6 @@ maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 properties:
-  nodename:
-    pattern: "^pinctrl@[0-9a-f]+$"
-
   compatible:
     oneOf:
       - enum:
@@ -121,6 +118,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -169,7 +169,7 @@ additionalProperties:
 
 examples:
   - |
-    pin-controller@10010000 {
+    pinctrl@10010000 {
       compatible = "ingenic,jz4770-pinctrl";
       reg = <0x10010000 0x600>;
 

Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml

@@ -47,6 +47,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-thunderbay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Thunder Bay pin controller Device Tree Bindings
+
+maintainers:
+  - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
+
+description: |
+  Intel Thunder Bay SoC integrates a pin controller which enables control
+  of pin directions, input/output values and configuration
+  for a total of 67 pins.
+
+properties:
+  compatible:
+    const: intel,thunderbay-pinctrl
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Specifies the interrupt lines to be used by the controller.
+    maxItems: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+patternProperties:
+  '^gpio@[0-9a-f]*$':
+    type: object
+
+    description:
+      Child nodes can be specified to contain pin configuration information,
+      which can then be utilized by pinctrl client devices.
+      The following properties are supported.
+
+    properties:
+      pins:
+        description: |
+          The name(s) of the pins to be configured in the child node.
+          Supported pin names are "GPIO0" up to "GPIO66".
+
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      drive-strength:
+        description: Drive strength for the pad.
+        enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
+
+      bias-bus-hold:
+        type: boolean
+
+      input-schmitt-enable:
+        type: boolean
+
+      slew-rate:
+        description: GPIO slew rate control.
+                      0 - Slow
+                      1 - Fast
+        enum: [0, 1]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    // Example 1
+    pinctrl0: gpio@0 {
+        compatible = "intel,thunderbay-pinctrl";
+        reg = <0x600b0000 0x88>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&pinctrl0 0 0 67>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    // Example 2
+    pinctrl1: gpio@1 {
+        compatible = "intel,thunderbay-pinctrl";
+        reg = <0x600c0000 0x88>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&pinctrl1 0 0 53>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };

Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml

@@ -64,6 +64,9 @@ required:
   - gpio-controller
   - "#gpio-cells"
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 patternProperties:
   '-[0-9]+$':
     type: object

Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml

@@ -59,6 +59,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml

@@ -45,6 +45,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml

@@ -42,6 +42,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml

@@ -56,6 +56,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml

@@ -56,6 +56,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt

@@ -4,7 +4,8 @@ Microsemi Ocelot pin controller Device Tree Bindings
 Required properties:
  - compatible		: Should be "mscc,ocelot-pinctrl",
 			  "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl",
-			  "mscc,luton-pinctrl" or "mscc,serval-pinctrl"
+			  "mscc,luton-pinctrl", "mscc,serval-pinctrl" or
+			  "microchip,lan966x-pinctrl"
  - reg			: Address and length of the register set for the device
  - gpio-controller	: Indicates this device is a GPIO controller
  - #gpio-cells		: Must be 2.

Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml

@@ -114,6 +114,9 @@ properties:
     description: enable output on a pin without actively driving it
       (such as enabling an output buffer)
 
+  output-impedance-ohms:
+    description: set the output impedance of a pin to at most X ohms
+
   output-low:
     type: boolean
     description: set the pin to output mode with low level

Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

@@ -97,47 +97,8 @@ For example:
 	};
 
 == Pin controller devices ==
-Required properties: See the pin controller driver specific documentation
 
-Optional properties:
-#pinctrl-cells:	Number of pin control cells in addition to the index within the
-		pin controller device instance
-
-pinctrl-use-default: Boolean. Indicates that the OS can use the boot default
-		pin configuration. This allows using an OS that does not have a
-		driver for the pin controller. This property can be set either
-		globally for the pin controller or in child nodes for individual
-		pin group control.
-
-Pin controller devices should contain the pin configuration nodes that client
-devices reference.
-
-For example:
-
-	pincontroller {
-		... /* Standard DT properties for the device itself elided */
-
-		state_0_node_a {
-			...
-		};
-		state_1_node_a {
-			...
-		};
-		state_1_node_b {
-			...
-		};
-	}
-
-The contents of each of those pin configuration child nodes is defined
-entirely by the binding for the individual pin controller device. There
-exists no common standard for this content. The pinctrl framework only
-provides generic helper bindings that the pin controller driver can use.
-
-The pin configuration nodes need not be direct children of the pin controller
-device; they may be grandchildren, for example. Whether this is legal, and
-whether there is any interaction between the child and intermediate parent
-nodes, is again defined entirely by the binding for the individual pin
-controller device.
+See pinctrl.yaml
 
 == Generic pin multiplexing node content ==
 

Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml

@@ -108,6 +108,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/pinctrl.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pin controller device
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Pin controller devices should contain the pin configuration nodes that client
+  devices reference.
+
+  The contents of each of those pin configuration child nodes is defined
+  entirely by the binding for the individual pin controller device. There
+  exists no common standard for this content. The pinctrl framework only
+  provides generic helper bindings that the pin controller driver can use.
+
+  The pin configuration nodes need not be direct children of the pin controller
+  device; they may be grandchildren, for example. Whether this is legal, and
+  whether there is any interaction between the child and intermediate parent
+  nodes, is again defined entirely by the binding for the individual pin
+  controller device.
+
+properties:
+  $nodename:
+    pattern: "^(pinctrl|pinmux)(@[0-9a-f]+)?$"
+
+  "#pinctrl-cells":
+    description: >
+      Number of pin control cells in addition to the index within the pin
+      controller device instance.
+
+  pinctrl-use-default:
+    type: boolean
+    description: >
+      Indicates that the OS can use the boot default pin configuration. This
+      allows using an OS that does not have a driver for the pin controller.
+      This property can be set either globally for the pin controller or in
+      child nodes for individual pin group control.
+
+additionalProperties: true

Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml

@@ -118,6 +118,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml

@@ -103,6 +103,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml

@@ -14,6 +14,7 @@ description: |
   MDM9607 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:

Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml

@@ -97,6 +97,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml

@@ -133,6 +133,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml

@@ -17,6 +17,7 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,pm2250-gpio
           - qcom,pm660-gpio
           - qcom,pm660l-gpio
           - qcom,pm6150-gpio
@@ -26,10 +27,12 @@ properties:
           - qcom,pm8005-gpio
           - qcom,pm8008-gpio
           - qcom,pm8018-gpio
+          - qcom,pm8019-gpio
           - qcom,pm8038-gpio
           - qcom,pm8058-gpio
           - qcom,pm8150-gpio
           - qcom,pm8150b-gpio
+          - qcom,pm8226-gpio
           - qcom,pm8350-gpio
           - qcom,pm8350b-gpio
           - qcom,pm8350c-gpio

Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml

@@ -118,6 +118,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml

@@ -123,6 +123,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml

@@ -14,6 +14,7 @@ description: |
   SC8180X platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:

Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml

@@ -118,6 +118,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX65 TLMM block
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description:
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SDX65 platform.
+
+properties:
+  compatible:
+    const: qcom,sdx65-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx65-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sdx65-tlmm-state"
+'$defs':
+  qcom-sdx65-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$"
+            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
+        minItems: 1
+        maxItems: 150
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+                bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+                qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+                dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+                blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+                mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+                atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
+                cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
+                pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
+                qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
+                qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
+                atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
+                atest_usb20, atest_char0, dac_calib10, qdss_stm10,
+                qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
+                blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
+                qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
+                qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
+                dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
+                qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
+                dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
+                dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
+                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+                dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
+                sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
+                qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
+                uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+                blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+                qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
+                blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
+                cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
+                blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
+                qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
+                isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
+                qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
+                sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
+                gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
+                qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
+                tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
+                qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
+                sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+                sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+                ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
+                blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
+                pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
+                qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
+                qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
+                gpio ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sdx65-tlmm";
+        reg = <0x03000000 0xdc2000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 109>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx {
+                pins = "gpio4";
+                function = "blsp_uart1";
+                bias-pull-up;
+            };
+
+            tx {
+                pins = "gpio5";
+                function = "blsp_uart1";
+                bias-disable;
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml

@@ -121,6 +121,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml

@@ -13,6 +13,7 @@ description: |
   in the SM6125 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:

Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml

@@ -14,6 +14,7 @@ description: |
   in the SM6350 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:

Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml

@@ -115,6 +115,9 @@ patternProperties:
 
       additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml

@@ -14,6 +14,7 @@ description: |
   in the SM8350 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:

Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8450 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM8450 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8450-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8450-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sm8450-tlmm-state"
+
+$defs:
+  qcom-sm8450-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aon_cam, atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
+                cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, gcc_gp2, gcc_gp3,
+                gpio, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1,
+                mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck,
+                mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
+                mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+                mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
+                mss_grfc7, mss_grfc8, mss_grfc9, nav, pcie0_clkreqn,
+                pcie1_clkreqn, phase_flag, pll_bist, pll_clk, pri_mi2s,
+                prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, qlink0_request,
+                qlink0_wmss, qlink1_enable, qlink1_request, qlink1_wmss,
+                qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
+                qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11,
+                qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, qup2,
+                qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4,
+                qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
+                sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
+                tgu_ch3, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+                tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
+                uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
+                usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        pinctrl@f100000 {
+                compatible = "qcom,sm8450-tlmm";
+                reg = <0x0f100000 0x300000>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 211>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+                gpio-wo-subnode-state {
+                        pins = "gpio1";
+                        function = "gpio";
+                };
+
+                uart-w-subnodes-state {
+                    rx {
+                            pins = "gpio26";
+                            function = "qup7";
+                            bias-pull-up;
+                    };
+
+                    tx {
+                            pins = "gpio27";
+                            function = "qup7";
+                            bias-disable;
+                    };
+               };
+        };
+...

Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml

@@ -51,6 +51,9 @@ properties:
       should not be accessed by the OS. Please see the ../gpio/gpio.txt for more
       information.
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - interrupts
   - interrupt-controller

Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml

@@ -44,6 +44,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 

Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml

@@ -70,6 +70,9 @@ properties:
   power-domains:
     maxItems: 1
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml

@@ -31,6 +31,9 @@ properties:
   reg:
     maxItems: 1
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml

@@ -72,6 +72,9 @@ patternProperties:
 
       additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml

@@ -73,6 +73,8 @@ additionalProperties:
         pins: true
         drive-strength:
           enum: [ 2, 4, 8, 12 ]
+        output-impedance-ohms:
+          enum: [ 33, 50, 66, 100 ]
         power-source:
           enum: [ 1800, 2500, 3300 ]
         slew-rate: true
@@ -90,6 +92,9 @@ additionalProperties:
       additionalProperties:
         $ref: "#/additionalProperties/anyOf/0"
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml

@@ -31,6 +31,9 @@ properties:
     description:
       The bus clock, sometimes described as pclk, for register accesses.
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml

@@ -67,6 +67,9 @@ properties:
 
   ranges: true
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - rockchip,grf

Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt

@@ -22,6 +22,7 @@ Required Properties:
   - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
   - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
   - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
+  - "samsung,exynos7885-pinctrl": for Exynos7885 compatible pin-controller.
   - "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller.
   - "samsung,exynosautov9-pinctrl": for ExynosAutov9 compatible pin-controller.
 

Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml

@@ -10,9 +10,6 @@ maintainers:
   - Masahiro Yamada <yamada.masahiro@socionext.com>
 
 properties:
-  $nodename:
-    pattern: "pinctrl"
-
   compatible:
     enum:
       - socionext,uniphier-ld4-pinctrl
@@ -26,11 +23,48 @@ properties:
       - socionext,uniphier-pxs3-pinctrl
       - socionext,uniphier-nx1-pinctrl
 
+additionalProperties:
+  type: object
+
+  allOf:
+    - $ref: pincfg-node.yaml#
+    - $ref: pinmux-node.yaml#
+
+  properties:
+    phandle: true
+    function: true
+    groups: true
+    pins: true
+    bias-pull-up: true
+    bias-pull-down: true
+    bias-pull-pin-default: true
+    drive-strength: true
+
+  additionalProperties:
+    type: object
+
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    properties:
+      phandle: true
+      function: true
+      groups: true
+      pins: true
+      bias-pull-up: true
+      bias-pull-down: true
+      bias-pull-pin-default: true
+      drive-strength: true
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 
-additionalProperties: false
-
 examples:
   - |
     // The UniPhier pinctrl should be a subnode of a "syscon" compatible node.

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml

@@ -183,6 +183,9 @@ patternProperties:
         required:
           - pinmux
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - '#address-cells'

Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml

@@ -20,6 +20,9 @@ properties:
   reg:
     maxItems: 1
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -80,7 +83,7 @@ examples:
         #address-cells = <2>;
         #size-cells = <2>;
 
-        pmux: pmux@24190000 {
+        pmux: pinmux@24190000 {
             compatible = "toshiba,tmpv7708-pinctrl";
             reg = <0 0x24190000 0 0x10000>;
 

Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml

@@ -167,6 +167,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml

@@ -290,6 +290,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: pinctrl.yaml#
+
 required:
   - compatible
 

MAINTAINERS

@@ -15241,6 +15241,11 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/pinctrl/pinctrl-single.c
 
+PIN CONTROLLER - THUNDERBAY
+M:	Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
+S:	Supported
+F:	drivers/pinctrl/pinctrl-thunderbay.c
+
 PKTCDVD DRIVER
 M:	linux-block@vger.kernel.org
 S:	Orphan

drivers/gpio/gpio-mockup.c

@@ -491,27 +491,6 @@ static void gpio_mockup_unregister_pdevs(void)
 	}
 }
 
-static __init char **gpio_mockup_make_line_names(const char *label,
-						 unsigned int num_lines)
-{
-	unsigned int i;
-	char **names;
-
-	names = kcalloc(num_lines + 1, sizeof(char *), GFP_KERNEL);
-	if (!names)
-		return NULL;
-
-	for (i = 0; i < num_lines; i++) {
-		names[i] = kasprintf(GFP_KERNEL, "%s-%u", label, i);
-		if (!names[i]) {
-			kfree_strarray(names, i);
-			return NULL;
-		}
-	}
-
-	return names;
-}
-
 static int __init gpio_mockup_register_chip(int idx)
 {
 	struct property_entry properties[GPIO_MOCKUP_MAX_PROP];
@@ -538,7 +517,7 @@ static int __init gpio_mockup_register_chip(int idx)
 	properties[prop++] = PROPERTY_ENTRY_U16("nr-gpios", ngpio);
 
 	if (gpio_mockup_named_lines) {
-		line_names = gpio_mockup_make_line_names(chip_label, ngpio);
+		line_names = kasprintf_strarray(GFP_KERNEL, chip_label, ngpio);
 		if (!line_names)
 			return -ENOMEM;
 

drivers/pinctrl/Makefile

@@ -6,57 +6,60 @@ subdir-ccflags-$(CONFIG_DEBUG_PINCTRL)	+= -DDEBUG
 obj-y				+= core.o pinctrl-utils.o
 obj-$(CONFIG_PINMUX)		+= pinmux.o
 obj-$(CONFIG_PINCONF)		+= pinconf.o
-obj-$(CONFIG_OF)		+= devicetree.o
 obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o
+obj-$(CONFIG_OF)		+= devicetree.o
+
+obj-$(CONFIG_PINCTRL_AMD)	+= pinctrl-amd.o
 obj-$(CONFIG_PINCTRL_APPLE_GPIO) += pinctrl-apple-gpio.o
 obj-$(CONFIG_PINCTRL_ARTPEC6)	+= pinctrl-artpec6.o
 obj-$(CONFIG_PINCTRL_AS3722)	+= pinctrl-as3722.o
-obj-$(CONFIG_PINCTRL_AXP209)	+= pinctrl-axp209.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_AT91PIO4)	+= pinctrl-at91-pio4.o
-obj-$(CONFIG_PINCTRL_AMD)	+= pinctrl-amd.o
+obj-$(CONFIG_PINCTRL_AXP209)	+= pinctrl-axp209.o
 obj-$(CONFIG_PINCTRL_BM1880)	+= pinctrl-bm1880.o
 obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
 obj-$(CONFIG_PINCTRL_DA9062)	+= pinctrl-da9062.o
 obj-$(CONFIG_PINCTRL_DIGICOLOR)	+= pinctrl-digicolor.o
-obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
+obj-$(CONFIG_PINCTRL_EQUILIBRIUM)   += pinctrl-equilibrium.o
 obj-$(CONFIG_PINCTRL_GEMINI)	+= pinctrl-gemini.o
+obj-$(CONFIG_PINCTRL_INGENIC)	+= pinctrl-ingenic.o
+obj-$(CONFIG_PINCTRL_K210)	+= pinctrl-k210.o
+obj-$(CONFIG_PINCTRL_KEEMBAY)	+= pinctrl-keembay.o
+obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
+obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
+obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
+obj-$(CONFIG_PINCTRL_LPC18XX)	+= pinctrl-lpc18xx.o
 obj-$(CONFIG_PINCTRL_MAX77620)	+= pinctrl-max77620.o
 obj-$(CONFIG_PINCTRL_MCP23S08_I2C)	+= pinctrl-mcp23s08_i2c.o
 obj-$(CONFIG_PINCTRL_MCP23S08_SPI)	+= pinctrl-mcp23s08_spi.o
 obj-$(CONFIG_PINCTRL_MCP23S08)	+= pinctrl-mcp23s08.o
-obj-$(CONFIG_PINCTRL_MESON)	+= meson/
+obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO)	+= pinctrl-microchip-sgpio.o
+obj-$(CONFIG_PINCTRL_OCELOT)	+= pinctrl-ocelot.o
 obj-$(CONFIG_PINCTRL_OXNAS)	+= pinctrl-oxnas.o
 obj-$(CONFIG_PINCTRL_PALMAS)	+= pinctrl-palmas.o
 obj-$(CONFIG_PINCTRL_PIC32)	+= pinctrl-pic32.o
 obj-$(CONFIG_PINCTRL_PISTACHIO)	+= pinctrl-pistachio.o
+obj-$(CONFIG_PINCTRL_RK805)	+= pinctrl-rk805.o
 obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
-obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o
-obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
-obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
-obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
-obj-$(CONFIG_PINCTRL_LPC18XX)	+= pinctrl-lpc18xx.o
-obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
-obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
 obj-$(CONFIG_PINCTRL_STARFIVE)	+= pinctrl-starfive.o
 obj-$(CONFIG_PINCTRL_STMFX) 	+= pinctrl-stmfx.o
-obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
+obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
+obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o
+obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
+obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o
 obj-$(CONFIG_PINCTRL_ZYNQMP)	+= pinctrl-zynqmp.o
-obj-$(CONFIG_PINCTRL_INGENIC)	+= pinctrl-ingenic.o
-obj-$(CONFIG_PINCTRL_RK805)	+= pinctrl-rk805.o
-obj-$(CONFIG_PINCTRL_OCELOT)	+= pinctrl-ocelot.o
-obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO)	+= pinctrl-microchip-sgpio.o
-obj-$(CONFIG_PINCTRL_EQUILIBRIUM)   += pinctrl-equilibrium.o
-obj-$(CONFIG_PINCTRL_K210)	+= pinctrl-k210.o
-obj-$(CONFIG_PINCTRL_KEEMBAY)	+= pinctrl-keembay.o
+obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
 
 obj-y				+= actions/
 obj-$(CONFIG_ARCH_ASPEED)	+= aspeed/
 obj-y				+= bcm/
 obj-$(CONFIG_PINCTRL_BERLIN)	+= berlin/
+obj-y				+= cirrus/
 obj-y				+= freescale/
 obj-$(CONFIG_X86)		+= intel/
+obj-y				+= mediatek/
+obj-$(CONFIG_PINCTRL_MESON)	+= meson/
 obj-y				+= mvebu/
 obj-y				+= nomadik/
 obj-$(CONFIG_ARCH_NPCM7XX)	+= nuvoton/
@@ -69,9 +72,8 @@ obj-$(CONFIG_PINCTRL_SPEAR)	+= spear/
 obj-y				+= sprd/
 obj-$(CONFIG_PINCTRL_STM32)	+= stm32/
 obj-$(CONFIG_PINCTRL_SUNXI)	+= sunxi/
+obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-y				+= ti/
 obj-$(CONFIG_PINCTRL_UNIPHIER)	+= uniphier/
-obj-$(CONFIG_ARCH_VT8500)	+= vt8500/
-obj-y				+= mediatek/
-obj-y				+= cirrus/
 obj-$(CONFIG_PINCTRL_VISCONTI)	+= visconti/
+obj-$(CONFIG_ARCH_VT8500)	+= vt8500/

drivers/pinctrl/actions/pinctrl-owl.c

@@ -874,7 +874,6 @@ static int owl_gpio_init(struct owl_pinctrl *pctrl)
 	chip->label = dev_name(pctrl->dev);
 	chip->parent = pctrl->dev;
 	chip->owner = THIS_MODULE;
-	chip->of_node = pctrl->dev->of_node;
 
 	pctrl->irq_chip.name = chip->of_node->name;
 	pctrl->irq_chip.irq_ack = owl_gpio_irq_ack;

drivers/pinctrl/aspeed/Kconfig

@@ -2,7 +2,7 @@
 config PINCTRL_ASPEED
 	bool
 	depends on (ARCH_ASPEED || COMPILE_TEST) && OF
-	depends on MFD_SYSCON
+	select MFD_SYSCON
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF

drivers/pinctrl/bcm/Kconfig

@@ -146,6 +146,8 @@ config PINCTRL_NS
 	depends on OF && (ARCH_BCM_5301X || COMPILE_TEST)
 	select PINMUX
 	select GENERIC_PINCONF
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
 	default ARCH_BCM_5301X
 	help
 	  Say yes here to enable the Broadcom NS SoC pins driver.

drivers/pinctrl/bcm/pinctrl-bcm2835.c

@@ -313,7 +313,10 @@ static inline void bcm2835_pinctrl_fsel_set(
 
 static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
-	return pinctrl_gpio_direction_input(chip->base + offset);
+	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+
+	bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
+	return 0;
 }
 
 static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -348,8 +351,11 @@ static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 static int bcm2835_gpio_direction_output(struct gpio_chip *chip,
 		unsigned offset, int value)
 {
-	bcm2835_gpio_set(chip, offset, value);
-	return pinctrl_gpio_direction_output(chip->base + offset);
+	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+
+	bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset);
+	bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_OUT);
+	return 0;
 }
 
 static const struct gpio_chip bcm2835_gpio_chip = {
@@ -407,7 +413,7 @@ static void bcm2835_gpio_irq_handler(struct irq_desc *desc)
 	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
 	struct irq_chip *host_chip = irq_desc_get_chip(desc);
 	int irq = irq_desc_get_irq(desc);
-	int group;
+	int group = 0;
 	int i;
 
 	for (i = 0; i < BCM2835_NUM_IRQS; i++) {
@@ -1222,7 +1228,6 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
 
 	pc->gpio_chip = *pdata->gpio_chip;
 	pc->gpio_chip.parent = dev;
-	pc->gpio_chip.of_node = np;
 
 	for (i = 0; i < BCM2835_NUM_BANKS; i++) {
 		unsigned long events;

drivers/pinctrl/bcm/pinctrl-iproc-gpio.c

@@ -836,7 +836,6 @@ static int iproc_gpio_probe(struct platform_device *pdev)
 	chip->num_banks = (ngpios + NGPIOS_PER_BANK - 1) / NGPIOS_PER_BANK;
 	gc->label = dev_name(dev);
 	gc->parent = dev;
-	gc->of_node = dev->of_node;
 	gc->request = iproc_gpio_request;
 	gc->free = iproc_gpio_free;
 	gc->direction_input = iproc_gpio_direction_input;

drivers/pinctrl/bcm/pinctrl-ns.c

@@ -14,6 +14,9 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
+#include "../core.h"
+#include "../pinmux.h"
+
 #define FLAG_BCM4708		BIT(1)
 #define FLAG_BCM4709		BIT(2)
 #define FLAG_BCM53012		BIT(3)
@@ -25,10 +28,6 @@ struct ns_pinctrl {
 	void __iomem *base;
 
 	struct pinctrl_desc pctldesc;
-	struct ns_pinctrl_group *groups;
-	unsigned int num_groups;
-	struct ns_pinctrl_function *functions;
-	unsigned int num_functions;
 };
 
 /*
@@ -65,22 +64,22 @@ static const struct pinctrl_pin_desc ns_pinctrl_pins[] = {
 
 struct ns_pinctrl_group {
 	const char *name;
-	const unsigned int *pins;
+	unsigned int *pins;
 	const unsigned int num_pins;
 	unsigned int chipsets;
 };
 
-static const unsigned int spi_pins[] = { 0, 1, 2, 3 };
-static const unsigned int i2c_pins[] = { 4, 5 };
-static const unsigned int mdio_pins[] = { 6, 7 };
-static const unsigned int pwm0_pins[] = { 8 };
-static const unsigned int pwm1_pins[] = { 9 };
-static const unsigned int pwm2_pins[] = { 10 };
-static const unsigned int pwm3_pins[] = { 11 };
-static const unsigned int uart1_pins[] = { 12, 13, 14, 15 };
-static const unsigned int uart2_pins[] = { 16, 17 };
-static const unsigned int sdio_pwr_pins[] = { 22 };
-static const unsigned int sdio_1p8v_pins[] = { 23 };
+static unsigned int spi_pins[] = { 0, 1, 2, 3 };
+static unsigned int i2c_pins[] = { 4, 5 };
+static unsigned int mdio_pins[] = { 6, 7 };
+static unsigned int pwm0_pins[] = { 8 };
+static unsigned int pwm1_pins[] = { 9 };
+static unsigned int pwm2_pins[] = { 10 };
+static unsigned int pwm3_pins[] = { 11 };
+static unsigned int uart1_pins[] = { 12, 13, 14, 15 };
+static unsigned int uart2_pins[] = { 16, 17 };
+static unsigned int sdio_pwr_pins[] = { 22 };
+static unsigned int sdio_1p8v_pins[] = { 23 };
 
 #define NS_GROUP(_name, _pins, _chipsets)		\
 {							\
@@ -146,38 +145,10 @@ static const struct ns_pinctrl_function ns_pinctrl_functions[] = {
  * Groups code
  */
 
-static int ns_pinctrl_get_groups_count(struct pinctrl_dev *pctrl_dev)
-{
-	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-
-	return ns_pinctrl->num_groups;
-}
-
-static const char *ns_pinctrl_get_group_name(struct pinctrl_dev *pctrl_dev,
-					     unsigned int selector)
-{
-	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-
-	return ns_pinctrl->groups[selector].name;
-}
-
-static int ns_pinctrl_get_group_pins(struct pinctrl_dev *pctrl_dev,
-				     unsigned int selector,
-				     const unsigned int **pins,
-				     unsigned int *num_pins)
-{
-	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-
-	*pins = ns_pinctrl->groups[selector].pins;
-	*num_pins = ns_pinctrl->groups[selector].num_pins;
-
-	return 0;
-}
-
 static const struct pinctrl_ops ns_pinctrl_ops = {
-	.get_groups_count = ns_pinctrl_get_groups_count,
-	.get_group_name = ns_pinctrl_get_group_name,
-	.get_group_pins = ns_pinctrl_get_group_pins,
+	.get_groups_count = pinctrl_generic_get_group_count,
+	.get_group_name = pinctrl_generic_get_group_name,
+	.get_group_pins = pinctrl_generic_get_group_pins,
 	.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
 	.dt_free_map = pinconf_generic_dt_free_map,
 };
@@ -186,48 +157,22 @@ static const struct pinctrl_ops ns_pinctrl_ops = {
  * Functions code
  */
 
-static int ns_pinctrl_get_functions_count(struct pinctrl_dev *pctrl_dev)
-{
-	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-
-	return ns_pinctrl->num_functions;
-}
-
-static const char *ns_pinctrl_get_function_name(struct pinctrl_dev *pctrl_dev,
-						unsigned int selector)
-{
-	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-
-	return ns_pinctrl->functions[selector].name;
-}
-
-static int ns_pinctrl_get_function_groups(struct pinctrl_dev *pctrl_dev,
-					  unsigned int selector,
-					  const char * const **groups,
-					  unsigned * const num_groups)
-{
-	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-
-	*groups = ns_pinctrl->functions[selector].groups;
-	*num_groups = ns_pinctrl->functions[selector].num_groups;
-
-	return 0;
-}
-
 static int ns_pinctrl_set_mux(struct pinctrl_dev *pctrl_dev,
 			      unsigned int func_select,
-			      unsigned int grp_select)
+			      unsigned int group_selector)
 {
 	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	struct group_desc *group;
 	u32 unset = 0;
 	u32 tmp;
 	int i;
 
-	for (i = 0; i < ns_pinctrl->groups[grp_select].num_pins; i++) {
-		int pin_number = ns_pinctrl->groups[grp_select].pins[i];
+	group = pinctrl_generic_get_group(pctrl_dev, group_selector);
+	if (!group)
+		return -EINVAL;
 
-		unset |= BIT(pin_number);
-	}
+	for (i = 0; i < group->num_pins; i++)
+		unset |= BIT(group->pins[i]);
 
 	tmp = readl(ns_pinctrl->base);
 	tmp &= ~unset;
@@ -237,9 +182,9 @@ static int ns_pinctrl_set_mux(struct pinctrl_dev *pctrl_dev,
 }
 
 static const struct pinmux_ops ns_pinctrl_pmxops = {
-	.get_functions_count = ns_pinctrl_get_functions_count,
-	.get_function_name = ns_pinctrl_get_function_name,
-	.get_function_groups = ns_pinctrl_get_function_groups,
+	.get_functions_count = pinmux_generic_get_function_count,
+	.get_function_name = pinmux_generic_get_function_name,
+	.get_function_groups = pinmux_generic_get_function_groups,
 	.set_mux = ns_pinctrl_set_mux,
 };
 
@@ -267,8 +212,6 @@ static int ns_pinctrl_probe(struct platform_device *pdev)
 	struct ns_pinctrl *ns_pinctrl;
 	struct pinctrl_desc *pctldesc;
 	struct pinctrl_pin_desc *pin;
-	struct ns_pinctrl_group *group;
-	struct ns_pinctrl_function *function;
 	struct resource *res;
 	int i;
 
@@ -315,43 +258,33 @@ static int ns_pinctrl_probe(struct platform_device *pdev)
 		}
 	}
 
-	ns_pinctrl->groups = devm_kcalloc(dev, ARRAY_SIZE(ns_pinctrl_groups),
-					  sizeof(struct ns_pinctrl_group),
-					  GFP_KERNEL);
-	if (!ns_pinctrl->groups)
-		return -ENOMEM;
-	for (i = 0, group = &ns_pinctrl->groups[0];
-	     i < ARRAY_SIZE(ns_pinctrl_groups); i++) {
-		const struct ns_pinctrl_group *src = &ns_pinctrl_groups[i];
+	/* Register */
 
-		if (src->chipsets & ns_pinctrl->chipset_flag) {
-			memcpy(group++, src, sizeof(*src));
-			ns_pinctrl->num_groups++;
-		}
+	ns_pinctrl->pctldev = devm_pinctrl_register(dev, pctldesc, ns_pinctrl);
+	if (IS_ERR(ns_pinctrl->pctldev)) {
+		dev_err(dev, "Failed to register pinctrl\n");
+		return PTR_ERR(ns_pinctrl->pctldev);
 	}
 
-	ns_pinctrl->functions = devm_kcalloc(dev,
-					     ARRAY_SIZE(ns_pinctrl_functions),
-					     sizeof(struct ns_pinctrl_function),
-					     GFP_KERNEL);
-	if (!ns_pinctrl->functions)
-		return -ENOMEM;
-	for (i = 0, function = &ns_pinctrl->functions[0];
-	     i < ARRAY_SIZE(ns_pinctrl_functions); i++) {
-		const struct ns_pinctrl_function *src = &ns_pinctrl_functions[i];
+	for (i = 0; i < ARRAY_SIZE(ns_pinctrl_groups); i++) {
+		const struct ns_pinctrl_group *group = &ns_pinctrl_groups[i];
 
-		if (src->chipsets & ns_pinctrl->chipset_flag) {
-			memcpy(function++, src, sizeof(*src));
-			ns_pinctrl->num_functions++;
-		}
+		if (!(group->chipsets & ns_pinctrl->chipset_flag))
+			continue;
+
+		pinctrl_generic_add_group(ns_pinctrl->pctldev, group->name,
+					  group->pins, group->num_pins, NULL);
 	}
 
-	/* Register */
+	for (i = 0; i < ARRAY_SIZE(ns_pinctrl_functions); i++) {
+		const struct ns_pinctrl_function *function = &ns_pinctrl_functions[i];
 
-	ns_pinctrl->pctldev = devm_pinctrl_register(dev, pctldesc, ns_pinctrl);
-	if (IS_ERR(ns_pinctrl->pctldev)) {
-		dev_err(dev, "Failed to register pinctrl\n");
-		return PTR_ERR(ns_pinctrl->pctldev);
+		if (!(function->chipsets & ns_pinctrl->chipset_flag))
+			continue;
+
+		pinmux_generic_add_function(ns_pinctrl->pctldev, function->name,
+					    function->groups,
+					    function->num_groups, NULL);
 	}
 
 	return 0;

drivers/pinctrl/bcm/pinctrl-nsp-gpio.c

@@ -648,7 +648,6 @@ static int nsp_gpio_probe(struct platform_device *pdev)
 	gc->ngpio = val;
 	gc->label = dev_name(dev);
 	gc->parent = dev;
-	gc->of_node = dev->of_node;
 	gc->request = gpiochip_generic_request;
 	gc->free = gpiochip_generic_free;
 	gc->direction_input = nsp_gpio_direction_input;

drivers/pinctrl/cirrus/pinctrl-lochnagar.c

@@ -1161,9 +1161,6 @@ static int lochnagar_pin_probe(struct platform_device *pdev)
 	priv->gpio_chip.can_sleep = true;
 	priv->gpio_chip.parent = dev;
 	priv->gpio_chip.base = -1;
-#ifdef CONFIG_OF_GPIO
-	priv->gpio_chip.of_node = dev->of_node;
-#endif
 
 	switch (lochnagar->type) {
 	case LOCHNAGAR1:

drivers/pinctrl/cirrus/pinctrl-madera-core.c

@@ -8,8 +8,10 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
@@ -1004,13 +1006,14 @@ static int madera_pin_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "%s\n", __func__);
 
+	device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
 	priv->dev = &pdev->dev;
 	priv->madera = madera;
-	pdev->dev.of_node = madera->dev->of_node;
 
 	switch (madera->type) {
 	case CS47L15:

drivers/pinctrl/freescale/Kconfig

@@ -173,6 +173,13 @@ config PINCTRL_IMX8ULP
 	help
 	  Say Y here to enable the imx8ulp pinctrl driver
 
+config PINCTRL_IMXRT1050
+	bool "IMXRT1050 pinctrl driver"
+	depends on ARCH_MXC
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imxrt1050 pinctrl driver
+
 config PINCTRL_VF610
 	bool "Freescale Vybrid VF610 pinctrl driver"
 	depends on SOC_VF610

drivers/pinctrl/freescale/Makefile

@@ -30,3 +30,4 @@ obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
 obj-$(CONFIG_PINCTRL_IMX25)	+= pinctrl-imx25.o
 obj-$(CONFIG_PINCTRL_IMX28)	+= pinctrl-imx28.o
+obj-$(CONFIG_PINCTRL_IMXRT1050)	+= pinctrl-imxrt1050.o

drivers/pinctrl/freescale/pinctrl-imx.c

@@ -648,7 +648,8 @@ static int imx_pinctrl_parse_functions(struct device_node *np,
 	struct device_node *child;
 	struct function_desc *func;
 	struct group_desc *grp;
-	u32 i = 0;
+	const char **group_names;
+	u32 i;
 
 	dev_dbg(pctl->dev, "parse function(%d): %pOFn\n", index, np);
 
@@ -663,14 +664,18 @@ static int imx_pinctrl_parse_functions(struct device_node *np,
 		dev_err(ipctl->dev, "no groups defined in %pOF\n", np);
 		return -EINVAL;
 	}
-	func->group_names = devm_kcalloc(ipctl->dev, func->num_group_names,
-					 sizeof(char *), GFP_KERNEL);
-	if (!func->group_names)
+
+	group_names = devm_kcalloc(ipctl->dev, func->num_group_names,
+				   sizeof(char *), GFP_KERNEL);
+	if (!group_names)
 		return -ENOMEM;
+	i = 0;
+	for_each_child_of_node(np, child)
+		group_names[i++] = child->name;
+	func->group_names = group_names;
 
+	i = 0;
 	for_each_child_of_node(np, child) {
-		func->group_names[i] = child->name;
-
 		grp = devm_kzalloc(ipctl->dev, sizeof(struct group_desc),
 				   GFP_KERNEL);
 		if (!grp) {

drivers/pinctrl/intel/pinctrl-baytrail.c

@@ -1577,7 +1577,7 @@ static int byt_gpio_probe(struct intel_pinctrl *vg)
 		vg->irqchip.irq_mask = byt_irq_mask,
 		vg->irqchip.irq_unmask = byt_irq_unmask,
 		vg->irqchip.irq_set_type = byt_irq_type,
-		vg->irqchip.flags = IRQCHIP_SKIP_SET_WAKE,
+		vg->irqchip.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED,
 
 		girq = &gc->irq;
 		girq->chip = &vg->irqchip;

drivers/pinctrl/mediatek/pinctrl-moore.c

@@ -519,7 +519,7 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 	return mtk_eint_set_debounce(hw->eint, desc->eint.eint_n, debounce);
 }
 
-static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
+static int mtk_build_gpiochip(struct mtk_pinctrl *hw)
 {
 	struct gpio_chip *chip = &hw->chip;
 	int ret;
@@ -536,7 +536,6 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
 	chip->set_config	= mtk_gpio_set_config;
 	chip->base		= -1;
 	chip->ngpio		= hw->soc->npins;
-	chip->of_node		= np;
 	chip->of_gpio_n_cells	= 2;
 
 	ret = gpiochip_add_data(chip, hw);
@@ -550,7 +549,7 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
 	 * Documentation/devicetree/bindings/gpio/gpio.txt on how to
 	 * bind pinctrl and gpio drivers via the "gpio-ranges" property.
 	 */
-	if (!of_find_property(np, "gpio-ranges", NULL)) {
+	if (!of_find_property(hw->dev->of_node, "gpio-ranges", NULL)) {
 		ret = gpiochip_add_pin_range(chip, dev_name(hw->dev), 0, 0,
 					     chip->ngpio);
 		if (ret < 0) {
@@ -691,7 +690,7 @@ int mtk_moore_pinctrl_probe(struct platform_device *pdev,
 			 "Failed to add EINT, but pinctrl still can work\n");
 
 	/* Build gpiochip should be after pinctrl_enable is done */
-	err = mtk_build_gpiochip(hw, pdev->dev.of_node);
+	err = mtk_build_gpiochip(hw);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add gpio_chip\n");
 		return err;

drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c

@@ -815,6 +815,8 @@ static int mtk_pinconf_bias_get_rsel(struct mtk_pinctrl *hw,
 		goto out;
 
 	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &pd);
+	if (err)
+		goto out;
 
 	if (pu == 0 && pd == 0) {
 		*pullup = 0;

drivers/pinctrl/mediatek/pinctrl-paris.c

@@ -581,7 +581,7 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
 {
 	int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1, rsel = -1;
 	const struct mtk_pin_desc *desc;
-	u32 try_all_type;
+	u32 try_all_type = 0;
 
 	if (gpio >= hw->soc->npins)
 		return -EINVAL;
@@ -895,7 +895,7 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 	return mtk_eint_set_debounce(hw->eint, desc->eint.eint_n, debounce);
 }
 
-static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
+static int mtk_build_gpiochip(struct mtk_pinctrl *hw)
 {
 	struct gpio_chip *chip = &hw->chip;
 	int ret;
@@ -913,7 +913,6 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
 	chip->set_config	= mtk_gpio_set_config;
 	chip->base		= -1;
 	chip->ngpio		= hw->soc->npins;
-	chip->of_node		= np;
 	chip->of_gpio_n_cells	= 2;
 
 	ret = gpiochip_add_data(chip, hw);
@@ -1037,7 +1036,7 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
 			 "Failed to add EINT, but pinctrl still can work\n");
 
 	/* Build gpiochip should be after pinctrl_enable is done */
-	err = mtk_build_gpiochip(hw, pdev->dev.of_node);
+	err = mtk_build_gpiochip(hw);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add gpio_chip\n");
 		return err;

drivers/pinctrl/mvebu/pinctrl-armada-37xx.c

@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/string_helpers.h>
 
 #include "../pinctrl-utils.h"
 
@@ -341,12 +342,12 @@ static int armada_37xx_pmx_set_by_name(struct pinctrl_dev *pctldev,
 				       struct armada_37xx_pin_group *grp)
 {
 	struct armada_37xx_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	struct device *dev = info->dev;
 	unsigned int reg = SELECTION;
 	unsigned int mask = grp->reg_mask;
 	int func, val;
 
-	dev_dbg(info->dev, "enable function %s group %s\n",
-		name, grp->name);
+	dev_dbg(dev, "enable function %s group %s\n", name, grp->name);
 
 	func = match_string(grp->funcs, NB_FUNCS, name);
 	if (func < 0)
@@ -722,25 +723,22 @@ static unsigned int armada_37xx_irq_startup(struct irq_data *d)
 static int armada_37xx_irqchip_register(struct platform_device *pdev,
 					struct armada_37xx_pinctrl *info)
 {
-	struct device_node *np = info->dev->of_node;
 	struct gpio_chip *gc = &info->gpio_chip;
 	struct irq_chip *irqchip = &info->irq_chip;
 	struct gpio_irq_chip *girq = &gc->irq;
 	struct device *dev = &pdev->dev;
-	struct resource res;
+	struct device_node *np;
 	int ret = -ENODEV, i, nr_irq_parent;
 
 	/* Check if we have at least one gpio-controller child node */
-	for_each_child_of_node(info->dev->of_node, np) {
+	for_each_child_of_node(dev->of_node, np) {
 		if (of_property_read_bool(np, "gpio-controller")) {
 			ret = 0;
 			break;
 		}
 	}
-	if (ret) {
-		dev_err(dev, "no gpio-controller child node\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "no gpio-controller child node\n");
 
 	nr_irq_parent = of_irq_count(np);
 	spin_lock_init(&info->irq_lock);
@@ -750,12 +748,7 @@ static int armada_37xx_irqchip_register(struct platform_device *pdev,
 		return 0;
 	}
 
-	if (of_address_to_resource(info->dev->of_node, 1, &res)) {
-		dev_err(dev, "cannot find IO resource\n");
-		return -ENOENT;
-	}
-
-	info->base = devm_ioremap_resource(info->dev, &res);
+	info->base = devm_platform_ioremap_resource(pdev, 1);
 	if (IS_ERR(info->base))
 		return PTR_ERR(info->base);
 
@@ -774,8 +767,7 @@ static int armada_37xx_irqchip_register(struct platform_device *pdev,
 	 * the chained irq with all of them.
 	 */
 	girq->num_parents = nr_irq_parent;
-	girq->parents = devm_kcalloc(&pdev->dev, nr_irq_parent,
-				     sizeof(*girq->parents), GFP_KERNEL);
+	girq->parents = devm_kcalloc(dev, nr_irq_parent, sizeof(*girq->parents), GFP_KERNEL);
 	if (!girq->parents)
 		return -ENOMEM;
 	for (i = 0; i < nr_irq_parent; i++) {
@@ -794,11 +786,12 @@ static int armada_37xx_irqchip_register(struct platform_device *pdev,
 static int armada_37xx_gpiochip_register(struct platform_device *pdev,
 					struct armada_37xx_pinctrl *info)
 {
+	struct device *dev = &pdev->dev;
 	struct device_node *np;
 	struct gpio_chip *gc;
 	int ret = -ENODEV;
 
-	for_each_child_of_node(info->dev->of_node, np) {
+	for_each_child_of_node(dev->of_node, np) {
 		if (of_find_property(np, "gpio-controller", NULL)) {
 			ret = 0;
 			break;
@@ -811,19 +804,16 @@ static int armada_37xx_gpiochip_register(struct platform_device *pdev,
 
 	gc = &info->gpio_chip;
 	gc->ngpio = info->data->nr_pins;
-	gc->parent = &pdev->dev;
+	gc->parent = dev;
 	gc->base = -1;
 	gc->of_node = np;
 	gc->label = info->data->name;
 
 	ret = armada_37xx_irqchip_register(pdev, info);
-	if (ret)
-		return ret;
-	ret = devm_gpiochip_add_data(&pdev->dev, gc, info);
 	if (ret)
 		return ret;
 
-	return 0;
+	return devm_gpiochip_add_data(dev, gc, info);
 }
 
 /**
@@ -874,13 +864,13 @@ static int armada_37xx_add_function(struct armada_37xx_pmx_func *funcs,
 static int armada_37xx_fill_group(struct armada_37xx_pinctrl *info)
 {
 	int n, num = 0, funcsize = info->data->nr_pins;
+	struct device *dev = info->dev;
 
 	for (n = 0; n < info->ngroups; n++) {
 		struct armada_37xx_pin_group *grp = &info->groups[n];
 		int i, j, f;
 
-		grp->pins = devm_kcalloc(info->dev,
-					 grp->npins + grp->extra_npins,
+		grp->pins = devm_kcalloc(dev, grp->npins + grp->extra_npins,
 					 sizeof(*grp->pins),
 					 GFP_KERNEL);
 		if (!grp->pins)
@@ -898,8 +888,7 @@ static int armada_37xx_fill_group(struct armada_37xx_pinctrl *info)
 			ret = armada_37xx_add_function(info->funcs, &funcsize,
 					    grp->funcs[f]);
 			if (ret == -EOVERFLOW)
-				dev_err(info->dev,
-					"More functions than pins(%d)\n",
+				dev_err(dev, "More functions than pins(%d)\n",
 					info->data->nr_pins);
 			if (ret < 0)
 				continue;
@@ -913,7 +902,7 @@ static int armada_37xx_fill_group(struct armada_37xx_pinctrl *info)
 }
 
 /**
- * armada_37xx_fill_funcs() - complete the funcs array
+ * armada_37xx_fill_func() - complete the funcs array
  * @info: info driver instance
  *
  * Based on the data available from the armada_37xx_pin_group array
@@ -925,6 +914,7 @@ static int armada_37xx_fill_group(struct armada_37xx_pinctrl *info)
 static int armada_37xx_fill_func(struct armada_37xx_pinctrl *info)
 {
 	struct armada_37xx_pmx_func *funcs = info->funcs;
+	struct device *dev = info->dev;
 	int n;
 
 	for (n = 0; n < info->nfuncs; n++) {
@@ -932,8 +922,7 @@ static int armada_37xx_fill_func(struct armada_37xx_pinctrl *info)
 		const char **groups;
 		int g;
 
-		funcs[n].groups = devm_kcalloc(info->dev,
-					       funcs[n].ngroups,
+		funcs[n].groups = devm_kcalloc(dev, funcs[n].ngroups,
 					       sizeof(*(funcs[n].groups)),
 					       GFP_KERNEL);
 		if (!funcs[n].groups)
@@ -962,6 +951,8 @@ static int armada_37xx_pinctrl_register(struct platform_device *pdev,
 	const struct armada_37xx_pin_data *pin_data = info->data;
 	struct pinctrl_desc *ctrldesc = &info->pctl;
 	struct pinctrl_pin_desc *pindesc, *pdesc;
+	struct device *dev = &pdev->dev;
+	char **pin_names;
 	int pin, ret;
 
 	info->groups = pin_data->groups;
@@ -973,20 +964,21 @@ static int armada_37xx_pinctrl_register(struct platform_device *pdev,
 	ctrldesc->pmxops = &armada_37xx_pmx_ops;
 	ctrldesc->confops = &armada_37xx_pinconf_ops;
 
-	pindesc = devm_kcalloc(&pdev->dev,
-			       pin_data->nr_pins, sizeof(*pindesc),
-			       GFP_KERNEL);
+	pindesc = devm_kcalloc(dev, pin_data->nr_pins, sizeof(*pindesc), GFP_KERNEL);
 	if (!pindesc)
 		return -ENOMEM;
 
 	ctrldesc->pins = pindesc;
 	ctrldesc->npins = pin_data->nr_pins;
 
+	pin_names = devm_kasprintf_strarray(dev, pin_data->name, pin_data->nr_pins);
+	if (IS_ERR(pin_names))
+		return PTR_ERR(pin_names);
+
 	pdesc = pindesc;
 	for (pin = 0; pin < pin_data->nr_pins; pin++) {
 		pdesc->number = pin;
-		pdesc->name = kasprintf(GFP_KERNEL, "%s-%d",
-					pin_data->name, pin);
+		pdesc->name = pin_names[pin];
 		pdesc++;
 	}
 
@@ -994,14 +986,10 @@ static int armada_37xx_pinctrl_register(struct platform_device *pdev,
 	 * we allocate functions for number of pins and hope there are
 	 * fewer unique functions than pins available
 	 */
-	info->funcs = devm_kcalloc(&pdev->dev,
-				   pin_data->nr_pins,
-				   sizeof(struct armada_37xx_pmx_func),
-				   GFP_KERNEL);
+	info->funcs = devm_kcalloc(dev, pin_data->nr_pins, sizeof(*info->funcs), GFP_KERNEL);
 	if (!info->funcs)
 		return -ENOMEM;
 
-
 	ret = armada_37xx_fill_group(info);
 	if (ret)
 		return ret;
@@ -1010,11 +998,9 @@ static int armada_37xx_pinctrl_register(struct platform_device *pdev,
 	if (ret)
 		return ret;
 
-	info->pctl_dev = devm_pinctrl_register(&pdev->dev, ctrldesc, info);
-	if (IS_ERR(info->pctl_dev)) {
-		dev_err(&pdev->dev, "could not register pinctrl driver\n");
-		return PTR_ERR(info->pctl_dev);
-	}
+	info->pctl_dev = devm_pinctrl_register(dev, ctrldesc, info);
+	if (IS_ERR(info->pctl_dev))
+		return dev_err_probe(dev, PTR_ERR(info->pctl_dev), "could not register pinctrl driver\n");
 
 	return 0;
 }
@@ -1143,18 +1129,15 @@ static int __init armada_37xx_pinctrl_probe(struct platform_device *pdev)
 	struct regmap *regmap;
 	int ret;
 
-	info = devm_kzalloc(dev, sizeof(struct armada_37xx_pinctrl),
-			    GFP_KERNEL);
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
 
 	info->dev = dev;
 
 	regmap = syscon_node_to_regmap(np);
-	if (IS_ERR(regmap)) {
-		dev_err(&pdev->dev, "cannot get regmap\n");
-		return PTR_ERR(regmap);
-	}
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap), "cannot get regmap\n");
 	info->regmap = regmap;
 
 	info->data = of_device_get_match_data(dev);

drivers/pinctrl/pinconf-generic.c

@@ -46,6 +46,7 @@ static const struct pin_config_item conf_items[] = {
 	PCONFDUMP(PIN_CONFIG_MODE_LOW_POWER, "pin low power", "mode", true),
 	PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false),
 	PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
+	PCONFDUMP(PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS, "output impedance", "ohms", true),
 	PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true),
 	PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false),
 	PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true),
@@ -179,6 +180,7 @@ static const struct pinconf_generic_params dt_params[] = {
 	{ "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 },
 	{ "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 },
 	{ "output-high", PIN_CONFIG_OUTPUT, 1, },
+	{ "output-impedance-ohms", PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS, 0 },
 	{ "output-low", PIN_CONFIG_OUTPUT, 0, },
 	{ "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
 	{ "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 },

drivers/pinctrl/pinctrl-amd.c

@@ -1009,9 +1009,6 @@ static int amd_gpio_probe(struct platform_device *pdev)
 	gpio_dev->gc.owner			= THIS_MODULE;
 	gpio_dev->gc.parent			= &pdev->dev;
 	gpio_dev->gc.ngpio			= resource_size(res) / 4;
-#if defined(CONFIG_OF_GPIO)
-	gpio_dev->gc.of_node			= pdev->dev.of_node;
-#endif
 
 	gpio_dev->hwbank_num = gpio_dev->gc.ngpio / 64;
 	gpio_dev->groups = kerncz_groups;

drivers/pinctrl/pinctrl-apple-gpio.c

@@ -11,6 +11,7 @@
  */
 
 #include <dt-bindings/pinctrl/apple.h>
+#include <linux/bits.h>
 #include <linux/gpio/driver.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -36,7 +37,7 @@ struct apple_gpio_pinctrl {
 	struct pinctrl_desc pinctrl_desc;
 	struct gpio_chip gpio_chip;
 	struct irq_chip irq_chip;
-	u8 irqgrps[0];
+	u8 irqgrps[];
 };
 
 #define REG_GPIO(x)          (4 * (x))
@@ -70,31 +71,35 @@ struct regmap_config regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 	.max_register = 512 * sizeof(u32),
 	.num_reg_defaults_raw = 512,
-	.use_relaxed_mmio = true
+	.use_relaxed_mmio = true,
 };
 
-// No locking needed to mask/unmask IRQs as the interrupt mode is per pin-register.
+/* No locking needed to mask/unmask IRQs as the interrupt mode is per pin-register. */
 static void apple_gpio_set_reg(struct apple_gpio_pinctrl *pctl,
-			       unsigned int pin, u32 mask, u32 value)
+                               unsigned int pin, u32 mask, u32 value)
 {
 	regmap_update_bits(pctl->map, REG_GPIO(pin), mask, value);
 }
 
-static uint32_t apple_gpio_get_reg(struct apple_gpio_pinctrl *pctl,
-				   unsigned int pin)
+static u32 apple_gpio_get_reg(struct apple_gpio_pinctrl *pctl,
+                              unsigned int pin)
 {
-	unsigned int val = 0;
+	int ret;
+	u32 val;
+
+	ret = regmap_read(pctl->map, REG_GPIO(pin), &val);
+	if (ret)
+		return 0;
 
-	regmap_read(pctl->map, REG_GPIO(pin), &val);
 	return val;
 }
 
 /* Pin controller functions */
 
 static int apple_gpio_dt_node_to_map(struct pinctrl_dev *pctldev,
-				     struct device_node *node,
-				     struct pinctrl_map **map,
-				     unsigned *num_maps)
+                                     struct device_node *node,
+                                     struct pinctrl_map **map,
+                                     unsigned *num_maps)
 {
 	unsigned reserved_maps;
 	struct apple_gpio_pinctrl *pctl;
@@ -114,13 +119,12 @@ static int apple_gpio_dt_node_to_map(struct pinctrl_dev *pctldev,
 		dev_err(pctl->dev,
 			"missing or empty pinmux property in node %pOFn.\n",
 			node);
-		return ret;
+		return ret ? ret : -EINVAL;
 	}
 
 	num_pins = ret;
 
-	ret = pinctrl_utils_reserve_map(pctldev, map, &reserved_maps, num_maps,
-					num_pins);
+	ret = pinctrl_utils_reserve_map(pctldev, map, &reserved_maps, num_maps, num_pins);
 	if (ret)
 		return ret;
 
@@ -138,11 +142,10 @@ static int apple_gpio_dt_node_to_map(struct pinctrl_dev *pctldev,
 		}
 
 		group_name = pinctrl_generic_get_group_name(pctldev, pin);
-		function_name =
-			pinmux_generic_get_function_name(pctl->pctldev, func);
+		function_name = pinmux_generic_get_function_name(pctl->pctldev, func);
 		ret = pinctrl_utils_add_map_mux(pctl->pctldev, map,
-						&reserved_maps, num_maps,
-						group_name, function_name);
+		                                &reserved_maps, num_maps,
+		                                group_name, function_name);
 		if (ret)
 			goto free_map;
 	}
@@ -165,7 +168,7 @@ static const struct pinctrl_ops apple_gpio_pinctrl_ops = {
 /* Pin multiplexer functions */
 
 static int apple_gpio_pinmux_set(struct pinctrl_dev *pctldev, unsigned func,
-				    unsigned group)
+                                 unsigned group)
 {
 	struct apple_gpio_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
 
@@ -186,14 +189,14 @@ static const struct pinmux_ops apple_gpio_pinmux_ops = {
 
 /* GPIO chip functions */
 
-static int apple_gpio_get_direction(struct gpio_chip *chip,
-					 unsigned int offset)
+static int apple_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 {
 	struct apple_gpio_pinctrl *pctl = gpiochip_get_data(chip);
 	unsigned int reg = apple_gpio_get_reg(pctl, offset);
 
-	return (FIELD_GET(REG_GPIOx_MODE, reg) == REG_GPIOx_OUT) ?
-		       GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
+	if (FIELD_GET(REG_GPIOx_MODE, reg) == REG_GPIOx_OUT)
+		return GPIO_LINE_DIRECTION_OUT;
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int apple_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -211,17 +214,14 @@ static int apple_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return !!(reg & REG_GPIOx_DATA);
 }
 
-static void apple_gpio_set(struct gpio_chip *chip, unsigned int offset,
-				int value)
+static void apple_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
 {
 	struct apple_gpio_pinctrl *pctl = gpiochip_get_data(chip);
 
-	apple_gpio_set_reg(pctl, offset, REG_GPIOx_DATA,
-			   value ? REG_GPIOx_DATA : 0);
+	apple_gpio_set_reg(pctl, offset, REG_GPIOx_DATA, value ? REG_GPIOx_DATA : 0);
 }
 
-static int apple_gpio_direction_input(struct gpio_chip *chip,
-					   unsigned int offset)
+static int apple_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
 {
 	struct apple_gpio_pinctrl *pctl = gpiochip_get_data(chip);
 
@@ -234,7 +234,7 @@ static int apple_gpio_direction_input(struct gpio_chip *chip,
 }
 
 static int apple_gpio_direction_output(struct gpio_chip *chip,
-					    unsigned int offset, int value)
+                                       unsigned int offset, int value)
 {
 	struct apple_gpio_pinctrl *pctl = gpiochip_get_data(chip);
 
@@ -249,13 +249,10 @@ static int apple_gpio_direction_output(struct gpio_chip *chip,
 
 static void apple_gpio_irq_ack(struct irq_data *data)
 {
-	struct apple_gpio_pinctrl *pctl =
-		gpiochip_get_data(irq_data_get_irq_chip_data(data));
-	unsigned int irqgrp =
-		FIELD_GET(REG_GPIOx_GRP, apple_gpio_get_reg(pctl, data->hwirq));
+	struct apple_gpio_pinctrl *pctl = gpiochip_get_data(irq_data_get_irq_chip_data(data));
+	unsigned int irqgrp = FIELD_GET(REG_GPIOx_GRP, apple_gpio_get_reg(pctl, data->hwirq));
 
-	writel(BIT(data->hwirq & 31),
-	       pctl->base + REG_IRQ(irqgrp, data->hwirq));
+	writel(BIT(data->hwirq % 32), pctl->base + REG_IRQ(irqgrp, data->hwirq));
 }
 
 static unsigned int apple_gpio_irq_type(unsigned int type)
@@ -278,20 +275,19 @@ static unsigned int apple_gpio_irq_type(unsigned int type)
 
 static void apple_gpio_irq_mask(struct irq_data *data)
 {
-	struct apple_gpio_pinctrl *pctl =
-		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+	struct apple_gpio_pinctrl *pctl = gpiochip_get_data(irq_data_get_irq_chip_data(data));
+
 	apple_gpio_set_reg(pctl, data->hwirq, REG_GPIOx_MODE,
-			   FIELD_PREP(REG_GPIOx_MODE, REG_GPIOx_IN_IRQ_OFF));
+	                   FIELD_PREP(REG_GPIOx_MODE, REG_GPIOx_IN_IRQ_OFF));
 }
 
 static void apple_gpio_irq_unmask(struct irq_data *data)
 {
-	struct apple_gpio_pinctrl *pctl =
-		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+	struct apple_gpio_pinctrl *pctl = gpiochip_get_data(irq_data_get_irq_chip_data(data));
 	unsigned int irqtype = apple_gpio_irq_type(irqd_get_trigger_type(data));
 
 	apple_gpio_set_reg(pctl, data->hwirq, REG_GPIOx_MODE,
-			   FIELD_PREP(REG_GPIOx_MODE, irqtype));
+	                   FIELD_PREP(REG_GPIOx_MODE, irqtype));
 }
 
 static unsigned int apple_gpio_irq_startup(struct irq_data *data)
@@ -300,7 +296,7 @@ static unsigned int apple_gpio_irq_startup(struct irq_data *data)
 	struct apple_gpio_pinctrl *pctl = gpiochip_get_data(chip);
 
 	apple_gpio_set_reg(pctl, data->hwirq, REG_GPIOx_GRP,
-			   FIELD_PREP(REG_GPIOx_GRP, 0));
+	                   FIELD_PREP(REG_GPIOx_GRP, 0));
 
 	apple_gpio_direction_input(chip, data->hwirq);
 	apple_gpio_irq_unmask(data);
@@ -308,18 +304,16 @@ static unsigned int apple_gpio_irq_startup(struct irq_data *data)
 	return 0;
 }
 
-static int apple_gpio_irq_set_type(struct irq_data *data,
-					unsigned int type)
+static int apple_gpio_irq_set_type(struct irq_data *data, unsigned int type)
 {
-	struct apple_gpio_pinctrl *pctl =
-		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+	struct apple_gpio_pinctrl *pctl = gpiochip_get_data(irq_data_get_irq_chip_data(data));
 	unsigned int irqtype = apple_gpio_irq_type(type);
 
 	if (irqtype == REG_GPIOx_IN_IRQ_OFF)
 		return -EINVAL;
 
 	apple_gpio_set_reg(pctl, data->hwirq, REG_GPIOx_MODE,
-			   FIELD_PREP(REG_GPIOx_MODE, irqtype));
+	                   FIELD_PREP(REG_GPIOx_MODE, irqtype));
 
 	if (type & IRQ_TYPE_LEVEL_MASK)
 		irq_set_handler_locked(data, handle_level_irq);
@@ -366,10 +360,6 @@ static int apple_gpio_register(struct apple_gpio_pinctrl *pctl)
 	void **irq_data = NULL;
 	int ret;
 
-	if (!of_property_read_bool(pctl->dev->of_node, "gpio-controller"))
-		return dev_err_probe(pctl->dev,	-ENODEV,
-				     "No gpio-controller property\n");
-
 	pctl->irq_chip = apple_gpio_irqchip;
 
 	pctl->gpio_chip.label = dev_name(pctl->dev);
@@ -383,7 +373,6 @@ static int apple_gpio_register(struct apple_gpio_pinctrl *pctl)
 	pctl->gpio_chip.base = -1;
 	pctl->gpio_chip.ngpio = pctl->pinctrl_desc.npins;
 	pctl->gpio_chip.parent = pctl->dev;
-	pctl->gpio_chip.of_node = pctl->dev->of_node;
 
 	if (girq->num_parents) {
 		int i;
@@ -398,14 +387,13 @@ static int apple_gpio_register(struct apple_gpio_pinctrl *pctl)
 					 GFP_KERNEL);
 		if (!girq->parents || !irq_data) {
 			ret = -ENOMEM;
-			goto out;
+			goto out_free_irq_data;
 		}
 
 		for (i = 0; i < girq->num_parents; i++) {
-			ret = platform_get_irq(to_platform_device(pctl->dev),
-					       i);
+			ret = platform_get_irq(to_platform_device(pctl->dev), i);
 			if (ret < 0)
-				goto out;
+				goto out_free_irq_data;
 
 			girq->parents[i] = ret;
 			pctl->irqgrps[i] = i;
@@ -419,7 +407,8 @@ static int apple_gpio_register(struct apple_gpio_pinctrl *pctl)
 	}
 
 	ret = devm_gpiochip_add_data(pctl->dev, &pctl->gpio_chip, pctl);
-out:
+
+out_free_irq_data:
 	kfree(girq->parents);
 	kfree(irq_data);
 

drivers/pinctrl/pinctrl-as3722.c

@@ -23,19 +23,20 @@
 #include <linux/delay.h>
 #include <linux/gpio/driver.h>
 #include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/mfd/as3722.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
 
 #include "core.h"
 #include "pinconf.h"
@@ -551,12 +552,13 @@ static int as3722_pinctrl_probe(struct platform_device *pdev)
 	struct as3722_pctrl_info *as_pci;
 	int ret;
 
+	device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
 	as_pci = devm_kzalloc(&pdev->dev, sizeof(*as_pci), GFP_KERNEL);
 	if (!as_pci)
 		return -ENOMEM;
 
 	as_pci->dev = &pdev->dev;
-	as_pci->dev->of_node = pdev->dev.parent->of_node;
 	as_pci->as3722 = dev_get_drvdata(pdev->dev.parent);
 	platform_set_drvdata(pdev, as_pci);
 
@@ -578,7 +580,6 @@ static int as3722_pinctrl_probe(struct platform_device *pdev)
 
 	as_pci->gpio_chip = as3722_gpio_chip;
 	as_pci->gpio_chip.parent = &pdev->dev;
-	as_pci->gpio_chip.of_node = pdev->dev.parent->of_node;
 	ret = gpiochip_add_data(&as_pci->gpio_chip, as_pci);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Couldn't register gpiochip, %d\n", ret);

drivers/pinctrl/pinctrl-at91-pio4.c

@@ -1136,7 +1136,6 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
 	}
 
 	atmel_pioctrl->gpio_chip = &atmel_gpio_chip;
-	atmel_pioctrl->gpio_chip->of_node = dev->of_node;
 	atmel_pioctrl->gpio_chip->ngpio = atmel_pioctrl->npins;
 	atmel_pioctrl->gpio_chip->label = dev_name(dev);
 	atmel_pioctrl->gpio_chip->parent = dev;

drivers/pinctrl/pinctrl-at91.c

@@ -1868,7 +1868,6 @@ static int at91_gpio_probe(struct platform_device *pdev)
 	at91_chip->chip = at91_gpio_template;
 
 	chip = &at91_chip->chip;
-	chip->of_node = np;
 	chip->label = dev_name(&pdev->dev);
 	chip->parent = &pdev->dev;
 	chip->owner = THIS_MODULE;

drivers/pinctrl/pinctrl-da9062.c

@@ -14,6 +14,7 @@
 #include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 
 #include <linux/gpio/driver.h>
@@ -256,6 +257,8 @@ static int da9062_pctl_probe(struct platform_device *pdev)
 	struct da9062_pctl *pctl;
 	int i;
 
+	device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
 	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
 	if (!pctl)
 		return -ENOMEM;
@@ -277,9 +280,6 @@ static int da9062_pctl_probe(struct platform_device *pdev)
 	pctl->gc = reference_gc;
 	pctl->gc.label = dev_name(&pdev->dev);
 	pctl->gc.parent = &pdev->dev;
-#ifdef CONFIG_OF_GPIO
-	pctl->gc.of_node = parent->of_node;
-#endif
 
 	platform_set_drvdata(pdev, pctl);
 

drivers/pinctrl/pinctrl-digicolor.c

@@ -233,7 +233,7 @@ static void dc_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
 	spin_unlock_irqrestore(&pmap->lock, flags);
 }
 
-static int dc_gpiochip_add(struct dc_pinmap *pmap, struct device_node *np)
+static int dc_gpiochip_add(struct dc_pinmap *pmap)
 {
 	struct gpio_chip *chip = &pmap->chip;
 	int ret;
@@ -248,7 +248,6 @@ static int dc_gpiochip_add(struct dc_pinmap *pmap, struct device_node *np)
 	chip->set		= dc_gpio_set;
 	chip->base		= -1;
 	chip->ngpio		= PINS_COUNT;
-	chip->of_node		= np;
 	chip->of_gpio_n_cells	= 2;
 
 	spin_lock_init(&pmap->lock);
@@ -326,7 +325,7 @@ static int dc_pinctrl_probe(struct platform_device *pdev)
 		return PTR_ERR(pmap->pctl);
 	}
 
-	return dc_gpiochip_add(pmap, pdev->dev.of_node);
+	return dc_gpiochip_add(pmap);
 }
 
 static const struct of_device_id dc_pinctrl_ids[] = {

drivers/pinctrl/pinctrl-keembay.c

@@ -1555,58 +1555,42 @@ static int keembay_pinctrl_reg(struct keembay_pinctrl *kpc,  struct device *dev)
 }
 
 static int keembay_add_functions(struct keembay_pinctrl *kpc,
-				 struct function_desc *function)
+				 struct function_desc *functions)
 {
 	unsigned int i;
 
 	/* Assign the groups for each function */
-	for (i = 0; i < kpc->npins; i++) {
-		const struct pinctrl_pin_desc *pdesc = keembay_pins + i;
-		struct keembay_mux_desc *mux = pdesc->drv_data;
-
-		while (mux->name) {
-			struct function_desc *func;
-			const char **grp;
-			size_t grp_size;
-			u32 j, grp_num;
-
-			for (j = 0; j < kpc->nfuncs; j++) {
-				if (!strcmp(mux->name, function[j].name))
-					break;
-			}
-
-			if (j == kpc->nfuncs)
-				return -EINVAL;
-
-			func = function + j;
-			grp_num = func->num_group_names;
-			grp_size = sizeof(*func->group_names);
-
-			if (!func->group_names) {
-				func->group_names = devm_kcalloc(kpc->dev,
-								 grp_num,
-								 grp_size,
-								 GFP_KERNEL);
-				if (!func->group_names)
-					return -ENOMEM;
+	for (i = 0; i < kpc->nfuncs; i++) {
+		struct function_desc *func = &functions[i];
+		const char **group_names;
+		unsigned int grp_idx = 0;
+		int j;
+
+		group_names = devm_kcalloc(kpc->dev, func->num_group_names,
+					   sizeof(*group_names), GFP_KERNEL);
+		if (!group_names)
+			return -ENOMEM;
+
+		for (j = 0; j < kpc->npins; j++) {
+			const struct pinctrl_pin_desc *pdesc = &keembay_pins[j];
+			struct keembay_mux_desc *mux;
+
+			for (mux = pdesc->drv_data; mux->name; mux++) {
+				if (!strcmp(mux->name, func->name))
+					group_names[grp_idx++] = pdesc->name;
 			}
-
-			grp = func->group_names;
-			while (*grp)
-				grp++;
-
-			*grp = pdesc->name;
-			mux++;
 		}
+
+		func->group_names = group_names;
 	}
 
 	/* Add all functions */
 	for (i = 0; i < kpc->nfuncs; i++) {
 		pinmux_generic_add_function(kpc->pctrl,
-					    function[i].name,
-					    function[i].group_names,
-					    function[i].num_group_names,
-					    function[i].data);
+					    functions[i].name,
+					    functions[i].group_names,
+					    functions[i].num_group_names,
+					    functions[i].data);
 	}
 
 	return 0;
@@ -1617,37 +1601,38 @@ static int keembay_build_functions(struct keembay_pinctrl *kpc)
 	struct function_desc *keembay_funcs, *new_funcs;
 	int i;
 
-	/* Allocate total number of functions */
+	/*
+	 * Allocate maximum possible number of functions. Assume every pin
+	 * being part of 8 (hw maximum) globally unique muxes.
+	 */
 	kpc->nfuncs = 0;
 	keembay_funcs = kcalloc(kpc->npins * 8, sizeof(*keembay_funcs), GFP_KERNEL);
 	if (!keembay_funcs)
 		return -ENOMEM;
 
-	/* Find total number of functions and each's properties */
+	/* Setup 1 function for each unique mux */
 	for (i = 0; i < kpc->npins; i++) {
 		const struct pinctrl_pin_desc *pdesc = keembay_pins + i;
-		struct keembay_mux_desc *mux = pdesc->drv_data;
+		struct keembay_mux_desc *mux;
 
-		while (mux->name) {
-			struct function_desc *fdesc = keembay_funcs;
+		for (mux = pdesc->drv_data; mux->name; mux++) {
+			struct function_desc *fdesc;
 
-			while (fdesc->name) {
+			/* Check if we already have function for this mux */
+			for (fdesc = keembay_funcs; fdesc->name; fdesc++) {
 				if (!strcmp(mux->name, fdesc->name)) {
 					fdesc->num_group_names++;
 					break;
 				}
-
-				fdesc++;
 			}
 
+			/* Setup new function for this mux we didn't see before */
 			if (!fdesc->name) {
 				fdesc->name = mux->name;
 				fdesc->num_group_names = 1;
 				fdesc->data = &mux->mode;
 				kpc->nfuncs++;
 			}
-
-			mux++;
 		}
 	}