Skip to content

L
linux
Commit e30f33a5 authored by Arun Ramadoss's avatar Arun Ramadoss Committed by Jakub Kicinski
Browse files
Options

net: dsa: microchip: enable port queues for tc mqprio 

LAN937x family of switches has 8 queues per port where the KSZ switches
has 4 queues per port. By default, only one queue per port is enabled.
The queues are configurable in 2, 4 or 8. This patch add 8 number of
queues for LAN937x and 4 for other switches.
In the tag_ksz.c file, prioirty of the packet is queried using the skb
buffer and the corresponding value is updated in the tag.
Signed-off-by: default avatarArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 3176eb82
Hide whitespace changes
Inline Side-by-side
Showing with 62 additions and 1 deletion
drivers/net/dsa/microchip/ksz9477.c
View file @ e30f33a5
......@@ -980,6 +980,22 @@ int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs)
return ksz_write8(dev, REG_SW_LUE_CTRL_0, value);
}
void ksz9477_port_queue_split(struct ksz_device *dev, int port)
{
u8 data;
if (dev->info->num_tx_queues == 8)
data = PORT_EIGHT_QUEUE;
else if (dev->info->num_tx_queues == 4)
data = PORT_FOUR_QUEUE;
else if (dev->info->num_tx_queues == 2)
data = PORT_TWO_QUEUE;
else
data = PORT_SINGLE_QUEUE;
ksz_prmw8(dev, port, REG_PORT_CTRL_0, PORT_QUEUE_SPLIT_MASK, data);
}
void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
{
struct dsa_switch *ds = dev->ds;
......@@ -991,6 +1007,8 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
true);
ksz9477_port_queue_split(dev, port);
ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
/* set back pressure */
......
drivers/net/dsa/microchip/ksz9477.h
View file @ e30f33a5
......@@ -56,5 +56,6 @@ int ksz9477_reset_switch(struct ksz_device *dev);
int ksz9477_dsa_init(struct ksz_device *dev);
int ksz9477_switch_init(struct ksz_device *dev);
void ksz9477_switch_exit(struct ksz_device *dev);
void ksz9477_port_queue_split(struct ksz_device *dev, int port);
#endif
drivers/net/dsa/microchip/ksz9477_reg.h
View file @ e30f33a5
......@@ -850,7 +850,11 @@
#define PORT_FORCE_TX_FLOW_CTRL BIT(4)
#define PORT_FORCE_RX_FLOW_CTRL BIT(3)
#define PORT_TAIL_TAG_ENABLE BIT(2)
#define PORT_QUEUE_SPLIT_ENABLE 0x3
#define PORT_QUEUE_SPLIT_MASK GENMASK(1, 0)
#define PORT_EIGHT_QUEUE 0x3
#define PORT_FOUR_QUEUE 0x2
#define PORT_TWO_QUEUE 0x1
#define PORT_SINGLE_QUEUE 0x0
#define REG_PORT_CTRL_1 0x0021
......
drivers/net/dsa/microchip/ksz_common.c
View file @ e30f33a5
......@@ -1080,6 +1080,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x07, /* can be configured as cpu port */
.port_cnt = 3, /* total port count */
.port_nirqs = 3,
.num_tx_queues = 4,
.ops = &ksz9477_dev_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
......@@ -1106,6 +1107,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_statics = 8,
.cpu_ports = 0x10, /* can be configured as cpu port */
.port_cnt = 5, /* total cpu and user ports */
.num_tx_queues = 4,
.ops = &ksz8_dev_ops,
.ksz87xx_eee_link_erratum = true,
.mib_names = ksz9477_mib_names,
......@@ -1144,6 +1146,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_statics = 8,
.cpu_ports = 0x10, /* can be configured as cpu port */
.port_cnt = 5, /* total cpu and user ports */
.num_tx_queues = 4,
.ops = &ksz8_dev_ops,
.ksz87xx_eee_link_erratum = true,
.mib_names = ksz9477_mib_names,
......@@ -1168,6 +1171,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_statics = 8,
.cpu_ports = 0x10, /* can be configured as cpu port */
.port_cnt = 5, /* total cpu and user ports */
.num_tx_queues = 4,
.ops = &ksz8_dev_ops,
.ksz87xx_eee_link_erratum = true,
.mib_names = ksz9477_mib_names,
......@@ -1192,6 +1196,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_statics = 8,
.cpu_ports = 0x4, /* can be configured as cpu port */
.port_cnt = 3,
.num_tx_queues = 4,
.ops = &ksz8_dev_ops,
.mib_names = ksz88xx_mib_names,
.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
......@@ -1213,6 +1218,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x7F, /* can be configured as cpu port */
.port_cnt = 7, /* total physical port count */
.port_nirqs = 4,
.num_tx_queues = 4,
.ops = &ksz9477_dev_ops,
.phy_errata_9477 = true,
.mib_names = ksz9477_mib_names,
......@@ -1245,6 +1251,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x3F, /* can be configured as cpu port */
.port_cnt = 6, /* total physical port count */
.port_nirqs = 2,
.num_tx_queues = 4,
.ops = &ksz9477_dev_ops,
.phy_errata_9477 = true,
.mib_names = ksz9477_mib_names,
......@@ -1277,6 +1284,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x7F, /* can be configured as cpu port */
.port_cnt = 7, /* total physical port count */
.port_nirqs = 2,
.num_tx_queues = 4,
.ops = &ksz9477_dev_ops,
.phy_errata_9477 = true,
.mib_names = ksz9477_mib_names,
......@@ -1307,6 +1315,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x07, /* can be configured as cpu port */
.port_cnt = 3, /* total port count */
.port_nirqs = 2,
.num_tx_queues = 4,
.ops = &ksz9477_dev_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
......@@ -1332,6 +1341,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x07, /* can be configured as cpu port */
.port_cnt = 3, /* total port count */
.port_nirqs = 3,
.num_tx_queues = 4,
.ops = &ksz9477_dev_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
......@@ -1357,6 +1367,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x7F, /* can be configured as cpu port */
.port_cnt = 7, /* total physical port count */
.port_nirqs = 3,
.num_tx_queues = 4,
.ops = &ksz9477_dev_ops,
.phy_errata_9477 = true,
.mib_names = ksz9477_mib_names,
......@@ -1387,6 +1398,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x10, /* can be configured as cpu port */
.port_cnt = 5, /* total physical port count */
.port_nirqs = 6,
.num_tx_queues = 8,
.ops = &lan937x_dev_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
......@@ -1411,6 +1423,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x30, /* can be configured as cpu port */
.port_cnt = 6, /* total physical port count */
.port_nirqs = 6,
.num_tx_queues = 8,
.ops = &lan937x_dev_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
......@@ -1435,6 +1448,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x30, /* can be configured as cpu port */
.port_cnt = 8, /* total physical port count */
.port_nirqs = 6,
.num_tx_queues = 8,
.ops = &lan937x_dev_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
......@@ -1463,6 +1477,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x38, /* can be configured as cpu port */
.port_cnt = 5, /* total physical port count */
.port_nirqs = 6,
.num_tx_queues = 8,
.ops = &lan937x_dev_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
......@@ -1491,6 +1506,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x30, /* can be configured as cpu port */
.port_cnt = 8, /* total physical port count */
.port_nirqs = 6,
.num_tx_queues = 8,
.ops = &lan937x_dev_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
......@@ -2065,6 +2081,8 @@ static int ksz_setup(struct dsa_switch *ds)
dev->dev_ops->enable_stp_addr(dev);
ds->num_tx_queues = dev->info->num_tx_queues;
regmap_update_bits(dev->regmap[0], regs[S_MULTICAST_CTRL],
MULTICAST_STORM_DISABLE, MULTICAST_STORM_DISABLE);
......
drivers/net/dsa/microchip/ksz_common.h
View file @ e30f33a5
......@@ -49,6 +49,7 @@ struct ksz_chip_data {
int cpu_ports;
int port_cnt;
u8 port_nirqs;
u8 num_tx_queues;
const struct ksz_dev_ops *ops;
bool phy_errata_9477;
bool ksz87xx_eee_link_erratum;
......
drivers/net/dsa/microchip/lan937x_main.c
View file @ e30f33a5
......@@ -15,6 +15,7 @@
#include "lan937x_reg.h"
#include "ksz_common.h"
#include "ksz9477.h"
#include "lan937x.h"
static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
......@@ -180,6 +181,9 @@ void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port)
lan937x_port_cfg(dev, port, REG_PORT_CTRL_0,
PORT_TAIL_TAG_ENABLE, true);
/* Enable the Port Queue split */
ksz9477_port_queue_split(dev, port);
/* set back pressure for half duplex */
lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE,
true);
......
net/dsa/tag_ksz.c
View file @ e30f33a5
......@@ -178,6 +178,7 @@ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ8795, KSZ8795_NAME);
#define KSZ9477_PTP_TAG_LEN 4
#define KSZ9477_PTP_TAG_INDICATION 0x80
#define KSZ9477_TAIL_TAG_PRIO GENMASK(8, 7)
#define KSZ9477_TAIL_TAG_OVERRIDE BIT(9)
#define KSZ9477_TAIL_TAG_LOOKUP BIT(10)
......@@ -269,6 +270,8 @@ static struct sk_buff *ksz_defer_xmit(struct dsa_port *dp, struct sk_buff *skb)
static struct sk_buff *ksz9477_xmit(struct sk_buff *skb,
struct net_device *dev)
{
u16 queue_mapping = skb_get_queue_mapping(skb);
u8 prio = netdev_txq_to_tc(dev, queue_mapping);
struct dsa_port *dp = dsa_slave_to_port(dev);
__be16 *tag;
u8 *addr;
......@@ -285,6 +288,8 @@ static struct sk_buff *ksz9477_xmit(struct sk_buff *skb,
val = BIT(dp->index);
val |= FIELD_PREP(KSZ9477_TAIL_TAG_PRIO, prio);
if (is_link_local_ether_addr(addr))
val |= KSZ9477_TAIL_TAG_OVERRIDE;
......@@ -322,12 +327,15 @@ static const struct dsa_device_ops ksz9477_netdev_ops = {
DSA_TAG_DRIVER(ksz9477_netdev_ops);
MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ9477, KSZ9477_NAME);
#define KSZ9893_TAIL_TAG_PRIO GENMASK(4, 3)
#define KSZ9893_TAIL_TAG_OVERRIDE BIT(5)
#define KSZ9893_TAIL_TAG_LOOKUP BIT(6)
static struct sk_buff *ksz9893_xmit(struct sk_buff *skb,
struct net_device *dev)
{
u16 queue_mapping = skb_get_queue_mapping(skb);
u8 prio = netdev_txq_to_tc(dev, queue_mapping);
struct dsa_port *dp = dsa_slave_to_port(dev);
u8 *addr;
u8 *tag;
......@@ -343,6 +351,8 @@ static struct sk_buff *ksz9893_xmit(struct sk_buff *skb,
*tag = BIT(dp->index);
*tag |= FIELD_PREP(KSZ9893_TAIL_TAG_PRIO, prio);
if (is_link_local_ether_addr(addr))
*tag |= KSZ9893_TAIL_TAG_OVERRIDE;
......@@ -384,11 +394,14 @@ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ9893, KSZ9893_NAME);
#define LAN937X_TAIL_TAG_BLOCKING_OVERRIDE BIT(11)
#define LAN937X_TAIL_TAG_LOOKUP BIT(12)
#define LAN937X_TAIL_TAG_VALID BIT(13)
#define LAN937X_TAIL_TAG_PRIO GENMASK(10, 8)
#define LAN937X_TAIL_TAG_PORT_MASK 7
static struct sk_buff *lan937x_xmit(struct sk_buff *skb,
struct net_device *dev)
{
u16 queue_mapping = skb_get_queue_mapping(skb);
u8 prio = netdev_txq_to_tc(dev, queue_mapping);
struct dsa_port *dp = dsa_slave_to_port(dev);
const struct ethhdr *hdr = eth_hdr(skb);
__be16 *tag;
......@@ -403,6 +416,8 @@ static struct sk_buff *lan937x_xmit(struct sk_buff *skb,
val = BIT(dp->index);
val |= FIELD_PREP(LAN937X_TAIL_TAG_PRIO, prio);
if (is_link_local_ether_addr(hdr->h_dest))
val |= LAN937X_TAIL_TAG_BLOCKING_OVERRIDE;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7