Merge tag 'imx-drivers-4.21' of...

Merge tag 'imx-drivers-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers

i.MX drivers change for 4.21:
 - A series from Aisheng that improves SCU power domain bindings by
   defining '#power-domain-cells' as 1, and adds i.MX8 SCU power domain
   driver support on top of it.
 - A series from Lucas that updates gpcv2 driver for scalability and
   adds i.MX8MQ support into the driver.
 - Increase gpc driver GPC_CLK_MAX definition to 7, as DISPLAY power
   domain on imx6sx has 7 clocks.

* tag 'imx-drivers-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: gpc: Increase GPC_CLK_MAX to 7
  soc: imx: gpcv2: add support for i.MX8MQ SoC
  soc: imx: gpcv2: move register access table to domain data
  soc: imx: gpcv2: prefix i.MX7 specific defines
  firmware: imx: add SCU power domain driver
  firmware: imx: add pm svc headfile
  dt-bindings: fsl: scu: update power domain binding
  firmware: imx: remove resource id enums
  dt-bindings: imx: add scu resource id headfile
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt

@@ -58,19 +58,11 @@ This binding for the SCU power domain providers uses the generic power
 domain binding[2].
 
 Required properties:
-- compatible:		Should be "fsl,scu-pd".
-- #address-cells:	Should be 1.
-- #size-cells:		Should be 0.
-
-Required properties for power domain sub nodes:
-- #power-domain-cells:	Must be 0.
-
-Optional Properties:
-- reg:			Resource ID of this power domain.
-			No exist means uncontrollable by user.
+- compatible:		Should be "fsl,imx8qxp-scu-pd".
+- #power-domain-cells:	Must be 1. Contains the Resource ID used by
+			SCU commands.
 			See detailed Resource ID list from:
-			include/dt-bindings/power/imx-rsrc.h
-- power-domains:	phandle pointing to the parent power domain.
+			include/dt-bindings/firmware/imx/rsrc.h
 
 Clock bindings based on SCU Message Protocol
 ------------------------------------------------------------
@@ -152,22 +144,9 @@ firmware {
 			...
 		};
 
-		imx8qx-pm {
-			compatible = "fsl,scu-pd";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pd_dma: dma-power-domain {
-				#power-domain-cells = <0>;
-
-				pd_dma_lpuart0: dma-lpuart0@57 {
-					reg = <SC_R_UART_0>;
-					#power-domain-cells = <0>;
-					power-domains = <&pd_dma>;
-				};
-				...
-			};
-			...
+		pd: imx8qx-pd {
+			compatible = "fsl,imx8qxp-scu-pd";
+			#power-domain-cells = <1>;
 		};
 	};
 };
@@ -179,5 +158,5 @@ serial@5a060000 {
 	clocks = <&clk IMX8QXP_UART0_CLK>,
 		 <&clk IMX8QXP_UART0_IPG_CLK>;
 	clock-names = "per", "ipg";
-	power-domains = <&pd_dma_lpuart0>;
+	power-domains = <&pd IMX_SC_R_UART_0>;
 };

Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt

@@ -6,7 +6,9 @@ Control (PGC) for various power domains.
 
 Required properties:
 
-- compatible: Should be "fsl,imx7d-gpc"
+- compatible: Should be one of:
+	- "fsl,imx7d-gpc"
+	- "fsl,imx8mq-gpc"
 
 - reg: should be register base and length as documented in the
   datasheet
@@ -22,7 +24,8 @@ which, in turn, is expected to contain the following:
 Required properties:
 
 - reg: Power domain index. Valid values are defined in
-  include/dt-bindings/power/imx7-power.h
+  include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
+  include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
 
 - #power-domain-cells: Should be 0
 

drivers/firmware/imx/Kconfig

@@ -9,3 +9,9 @@ config IMX_SCU
 
 	  This driver manages the IPC interface between host CPU and the
 	  SCU firmware running on M4.
+
+config IMX_SCU_PD
+	bool "IMX SCU Power Domain driver"
+	depends on IMX_SCU
+	help
+	  The System Controller Firmware (SCFW) based power domain driver.

drivers/firmware/imx/Makefile

 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_IMX_SCU)	+= imx-scu.o misc.o
+obj-$(CONFIG_IMX_SCU)		+= imx-scu.o misc.o
+obj-$(CONFIG_IMX_SCU_PD)	+= scu-pd.o

drivers/firmware/imx/scu-pd.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ * Implementation of the SCU based Power Domains
+ *
+ * NOTE: a better implementation suggested by Ulf Hansson is using a
+ * single global power domain and implement the ->attach|detach_dev()
+ * callback for the genpd and use the regular of_genpd_add_provider_simple().
+ * From within the ->attach_dev(), we could get the OF node for
+ * the device that is being attached and then parse the power-domain
+ * cell containing the "resource id" and store that in the per device
+ * struct generic_pm_domain_data (we have void pointer there for
+ * storing these kind of things).
+ *
+ * Additionally, we need to implement the ->stop() and ->start()
+ * callbacks of genpd, which is where you "power on/off" devices,
+ * rather than using the above ->power_on|off() callbacks.
+ *
+ * However, there're two known issues:
+ * 1. The ->attach_dev() of power domain infrastructure still does
+ *    not support multi domains case as the struct device *dev passed
+ *    in is a virtual PD device, it does not help for parsing the real
+ *    device resource id from device tree, so it's unware of which
+ *    real sub power domain of device should be attached.
+ *
+ *    The framework needs some proper extension to support multi power
+ *    domain cases.
+ *
+ * 2. It also breaks most of current drivers as the driver probe sequence
+ *    behavior changed if removing ->power_on|off() callback and use
+ *    ->start() and ->stop() instead. genpd_dev_pm_attach will only power
+ *    up the domain and attach device, but will not call .start() which
+ *    relies on device runtime pm. That means the device power is still
+ *    not up before running driver probe function. For SCU enabled
+ *    platforms, all device drivers accessing registers/clock without power
+ *    domain enabled will trigger a HW access error. That means we need fix
+ *    most drivers probe sequence with proper runtime pm.
+ *
+ * In summary, we need fix above two issue before being able to switch to
+ * the "single global power domain" way.
+ *
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+
+/* SCU Power Mode Protocol definition */
+struct imx_sc_msg_req_set_resource_power_mode {
+	struct imx_sc_rpc_msg hdr;
+	u16 resource;
+	u8 mode;
+} __packed;
+
+#define IMX_SCU_PD_NAME_SIZE 20
+struct imx_sc_pm_domain {
+	struct generic_pm_domain pd;
+	char name[IMX_SCU_PD_NAME_SIZE];
+	u32 rsrc;
+};
+
+struct imx_sc_pd_range {
+	char *name;
+	u32 rsrc;
+	u8 num;
+	bool postfix;
+};
+
+struct imx_sc_pd_soc {
+	const struct imx_sc_pd_range *pd_ranges;
+	u8 num_ranges;
+};
+
+static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
+	/* LSIO SS */
+	{ "lsio-pwm", IMX_SC_R_PWM_0, 8, 1 },
+	{ "lsio-gpio", IMX_SC_R_GPIO_0, 8, 1 },
+	{ "lsio-gpt", IMX_SC_R_GPT_0, 5, 1 },
+	{ "lsio-kpp", IMX_SC_R_KPP, 1, 0 },
+	{ "lsio-fspi", IMX_SC_R_FSPI_0, 2, 1 },
+	{ "lsio-mu", IMX_SC_R_MU_0A, 14, 1 },
+
+	/* CONN SS */
+	{ "con-usb", IMX_SC_R_USB_0, 2, 1 },
+	{ "con-usb0phy", IMX_SC_R_USB_0_PHY, 1, 0 },
+	{ "con-usb2", IMX_SC_R_USB_2, 1, 0 },
+	{ "con-usb2phy", IMX_SC_R_USB_2_PHY, 1, 0 },
+	{ "con-sdhc", IMX_SC_R_SDHC_0, 3, 1 },
+	{ "con-enet", IMX_SC_R_ENET_0, 2, 1 },
+	{ "con-nand", IMX_SC_R_NAND, 1, 0 },
+	{ "con-mlb", IMX_SC_R_MLB_0, 1, 1 },
+
+	/* Audio DMA SS */
+	{ "adma-audio-pll0", IMX_SC_R_AUDIO_PLL_0, 1, 0 },
+	{ "adma-audio-pll1", IMX_SC_R_AUDIO_PLL_1, 1, 0 },
+	{ "adma-audio-clk-0", IMX_SC_R_AUDIO_CLK_0, 1, 0 },
+	{ "adma-dma0-ch", IMX_SC_R_DMA_0_CH0, 16, 1 },
+	{ "adma-dma1-ch", IMX_SC_R_DMA_1_CH0, 16, 1 },
+	{ "adma-dma2-ch", IMX_SC_R_DMA_2_CH0, 5, 1 },
+	{ "adma-asrc0", IMX_SC_R_ASRC_0, 1, 0 },
+	{ "adma-asrc1", IMX_SC_R_ASRC_1, 1, 0 },
+	{ "adma-esai0", IMX_SC_R_ESAI_0, 1, 0 },
+	{ "adma-spdif0", IMX_SC_R_SPDIF_0, 1, 0 },
+	{ "adma-sai", IMX_SC_R_SAI_0, 3, 1 },
+	{ "adma-amix", IMX_SC_R_AMIX, 1, 0 },
+	{ "adma-mqs0", IMX_SC_R_MQS_0, 1, 0 },
+	{ "adma-dsp", IMX_SC_R_DSP, 1, 0 },
+	{ "adma-dsp-ram", IMX_SC_R_DSP_RAM, 1, 0 },
+	{ "adma-can", IMX_SC_R_CAN_0, 3, 1 },
+	{ "adma-ftm", IMX_SC_R_FTM_0, 2, 1 },
+	{ "adma-lpi2c", IMX_SC_R_I2C_0, 4, 1 },
+	{ "adma-adc", IMX_SC_R_ADC_0, 1, 1 },
+	{ "adma-lcd", IMX_SC_R_LCD_0, 1, 1 },
+	{ "adma-lcd0-pwm", IMX_SC_R_LCD_0_PWM_0, 1, 1 },
+	{ "adma-lpuart", IMX_SC_R_UART_0, 4, 1 },
+	{ "adma-lpspi", IMX_SC_R_SPI_0, 4, 1 },
+
+	/* VPU SS  */
+	{ "vpu", IMX_SC_R_VPU, 1, 0 },
+	{ "vpu-pid", IMX_SC_R_VPU_PID0, 8, 1 },
+	{ "vpu-dec0", IMX_SC_R_VPU_DEC_0, 1, 0 },
+	{ "vpu-enc0", IMX_SC_R_VPU_ENC_0, 1, 0 },
+
+	/* GPU SS */
+	{ "gpu0-pid", IMX_SC_R_GPU_0_PID0, 4, 1 },
+
+	/* HSIO SS */
+	{ "hsio-pcie-b", IMX_SC_R_PCIE_B, 1, 0 },
+	{ "hsio-serdes-1", IMX_SC_R_SERDES_1, 1, 0 },
+	{ "hsio-gpio", IMX_SC_R_HSIO_GPIO, 1, 0 },
+
+	/* MIPI/LVDS SS */
+	{ "mipi0", IMX_SC_R_MIPI_0, 1, 0 },
+	{ "mipi0-pwm0", IMX_SC_R_MIPI_0_PWM_0, 1, 0 },
+	{ "mipi0-i2c", IMX_SC_R_MIPI_0_I2C_0, 2, 1 },
+	{ "lvds0", IMX_SC_R_LVDS_0, 1, 0 },
+
+	/* DC SS */
+	{ "dc0", IMX_SC_R_DC_0, 1, 0 },
+	{ "dc0-pll", IMX_SC_R_DC_0_PLL_0, 2, 1 },
+};
+
+static const struct imx_sc_pd_soc imx8qxp_scu_pd = {
+	.pd_ranges = imx8qxp_scu_pd_ranges,
+	.num_ranges = ARRAY_SIZE(imx8qxp_scu_pd_ranges),
+};
+
+static struct imx_sc_ipc *pm_ipc_handle;
+
+static inline struct imx_sc_pm_domain *
+to_imx_sc_pd(struct generic_pm_domain *genpd)
+{
+	return container_of(genpd, struct imx_sc_pm_domain, pd);
+}
+
+static int imx_sc_pd_power(struct generic_pm_domain *domain, bool power_on)
+{
+	struct imx_sc_msg_req_set_resource_power_mode msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	struct imx_sc_pm_domain *pd;
+	int ret;
+
+	pd = to_imx_sc_pd(domain);
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_PM;
+	hdr->func = IMX_SC_PM_FUNC_SET_RESOURCE_POWER_MODE;
+	hdr->size = 2;
+
+	msg.resource = pd->rsrc;
+	msg.mode = power_on ? IMX_SC_PM_PW_MODE_ON : IMX_SC_PM_PW_MODE_LP;
+
+	ret = imx_scu_call_rpc(pm_ipc_handle, &msg, true);
+	if (ret)
+		dev_err(&domain->dev, "failed to power %s resource %d ret %d\n",
+			power_on ? "up" : "off", pd->rsrc, ret);
+
+	return ret;
+}
+
+static int imx_sc_pd_power_on(struct generic_pm_domain *domain)
+{
+	return imx_sc_pd_power(domain, true);
+}
+
+static int imx_sc_pd_power_off(struct generic_pm_domain *domain)
+{
+	return imx_sc_pd_power(domain, false);
+}
+
+static struct generic_pm_domain *imx_scu_pd_xlate(struct of_phandle_args *spec,
+						  void *data)
+{
+	struct generic_pm_domain *domain = ERR_PTR(-ENOENT);
+	struct genpd_onecell_data *pd_data = data;
+	unsigned int i;
+
+	for (i = 0; i < pd_data->num_domains; i++) {
+		struct imx_sc_pm_domain *sc_pd;
+
+		sc_pd = to_imx_sc_pd(pd_data->domains[i]);
+		if (sc_pd->rsrc == spec->args[0]) {
+			domain = &sc_pd->pd;
+			break;
+		}
+	}
+
+	return domain;
+}
+
+static struct imx_sc_pm_domain *
+imx_scu_add_pm_domain(struct device *dev, int idx,
+		      const struct imx_sc_pd_range *pd_ranges)
+{
+	struct imx_sc_pm_domain *sc_pd;
+	int ret;
+
+	sc_pd = devm_kzalloc(dev, sizeof(*sc_pd), GFP_KERNEL);
+	if (!sc_pd)
+		return ERR_PTR(-ENOMEM);
+
+	sc_pd->rsrc = pd_ranges->rsrc + idx;
+	sc_pd->pd.power_off = imx_sc_pd_power_off;
+	sc_pd->pd.power_on = imx_sc_pd_power_on;
+
+	if (pd_ranges->postfix)
+		snprintf(sc_pd->name, sizeof(sc_pd->name),
+			 "%s%i", pd_ranges->name, idx);
+	else
+		snprintf(sc_pd->name, sizeof(sc_pd->name),
+			 "%s", pd_ranges->name);
+
+	sc_pd->pd.name = sc_pd->name;
+
+	if (sc_pd->rsrc >= IMX_SC_R_LAST) {
+		dev_warn(dev, "invalid pd %s rsrc id %d found",
+			 sc_pd->name, sc_pd->rsrc);
+
+		devm_kfree(dev, sc_pd);
+		return NULL;
+	}
+
+	ret = pm_genpd_init(&sc_pd->pd, NULL, true);
+	if (ret) {
+		dev_warn(dev, "failed to init pd %s rsrc id %d",
+			 sc_pd->name, sc_pd->rsrc);
+		devm_kfree(dev, sc_pd);
+		return NULL;
+	}
+
+	return sc_pd;
+}
+
+static int imx_scu_init_pm_domains(struct device *dev,
+				    const struct imx_sc_pd_soc *pd_soc)
+{
+	const struct imx_sc_pd_range *pd_ranges = pd_soc->pd_ranges;
+	struct generic_pm_domain **domains;
+	struct genpd_onecell_data *pd_data;
+	struct imx_sc_pm_domain *sc_pd;
+	u32 count = 0;
+	int i, j;
+
+	for (i = 0; i < pd_soc->num_ranges; i++)
+		count += pd_ranges[i].num;
+
+	domains = devm_kcalloc(dev, count, sizeof(*domains), GFP_KERNEL);
+	if (!domains)
+		return -ENOMEM;
+
+	pd_data = devm_kzalloc(dev, sizeof(*pd_data), GFP_KERNEL);
+	if (!pd_data)
+		return -ENOMEM;
+
+	count = 0;
+	for (i = 0; i < pd_soc->num_ranges; i++) {
+		for (j = 0; j < pd_ranges[i].num; j++) {
+			sc_pd = imx_scu_add_pm_domain(dev, j, &pd_ranges[i]);
+			if (IS_ERR_OR_NULL(sc_pd))
+				continue;
+
+			domains[count++] = &sc_pd->pd;
+			dev_dbg(dev, "added power domain %s\n", sc_pd->pd.name);
+		}
+	}
+
+	pd_data->domains = domains;
+	pd_data->num_domains = count;
+	pd_data->xlate = imx_scu_pd_xlate;
+
+	of_genpd_add_provider_onecell(dev->of_node, pd_data);
+
+	return 0;
+}
+
+static int imx_sc_pd_probe(struct platform_device *pdev)
+{
+	const struct imx_sc_pd_soc *pd_soc;
+	int ret;
+
+	ret = imx_scu_get_handle(&pm_ipc_handle);
+	if (ret)
+		return ret;
+
+	pd_soc = of_device_get_match_data(&pdev->dev);
+	if (!pd_soc)
+		return -ENODEV;
+
+	return imx_scu_init_pm_domains(&pdev->dev, pd_soc);
+}
+
+static const struct of_device_id imx_sc_pd_match[] = {
+	{ .compatible = "fsl,imx8qxp-scu-pd", &imx8qxp_scu_pd},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver imx_sc_pd_driver = {
+	.driver = {
+		.name = "imx-scu-pd",
+		.of_match_table = imx_sc_pd_match,
+	},
+	.probe = imx_sc_pd_probe,
+};
+builtin_platform_driver(imx_sc_pd_driver);
+
+MODULE_AUTHOR("Dong Aisheng <aisheng.dong@nxp.com>");
+MODULE_DESCRIPTION("IMX SCU Power Domain driver");
+MODULE_LICENSE("GPL v2");

drivers/soc/imx/Kconfig

 menu "i.MX SoC drivers"
 
-config IMX7_PM_DOMAINS
-	bool "i.MX7 PM domains"
-	depends on SOC_IMX7D || (COMPILE_TEST && OF)
+config IMX_GPCV2_PM_DOMAINS
+	bool "i.MX GPCv2 PM domains"
+	depends on SOC_IMX7D || SOC_IMX8MQ || (COMPILE_TEST && OF)
 	depends on PM
 	select PM_GENERIC_DOMAINS
 	default y if SOC_IMX7D

drivers/soc/imx/Makefile

 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
-obj-$(CONFIG_IMX7_PM_DOMAINS) += gpcv2.o
+obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o

drivers/soc/imx/gpc.c

@@ -35,7 +35,7 @@
 #define GPU_VPU_PUP_REQ		BIT(1)
 #define GPU_VPU_PDN_REQ		BIT(0)
 
-#define GPC_CLK_MAX		6
+#define GPC_CLK_MAX		7
 
 #define PGC_DOMAIN_FLAG_NO_PD		BIT(0)
 

include/dt-bindings/power/imx8mq-power.h

+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ *  Copyright (C) 2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#ifndef __DT_BINDINGS_IMX8MQ_POWER_H__
+#define __DT_BINDINGS_IMX8MQ_POWER_H__
+
+#define IMX8M_POWER_DOMAIN_MIPI		0
+#define IMX8M_POWER_DOMAIN_PCIE1	1
+#define IMX8M_POWER_DOMAIN_USB_OTG1	2
+#define IMX8M_POWER_DOMAIN_USB_OTG2	3
+#define IMX8M_POWER_DOMAIN_DDR1		4
+#define IMX8M_POWER_DOMAIN_GPU		5
+#define IMX8M_POWER_DOMAIN_VPU		6
+#define IMX8M_POWER_DOMAIN_DISP		7
+#define IMX8M_POWER_DOMAIN_MIPI_CSI1	8
+#define IMX8M_POWER_DOMAIN_MIPI_CSI2	9
+#define IMX8M_POWER_DOMAIN_PCIE2	10
+
+#endif

include/linux/firmware/imx/sci.h

@@ -14,4 +14,5 @@
 #include <linux/firmware/imx/types.h>
 
 #include <linux/firmware/imx/svc/misc.h>
+#include <linux/firmware/imx/svc/pm.h>
 #endif /* _SC_SCI_H */

include/linux/firmware/imx/svc/pm.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ *
+ * Header file containing the public API for the System Controller (SC)
+ * Power Management (PM) function. This includes functions for power state
+ * control, clock control, reset control, and wake-up event control.
+ *
+ * PM_SVC (SVC) Power Management Service
+ *
+ * Module for the Power Management (PM) service.
+ */
+
+#ifndef _SC_PM_API_H
+#define _SC_PM_API_H
+
+#include <linux/firmware/imx/sci.h>
+
+/*
+ * This type is used to indicate RPC PM function calls.
+ */
+enum imx_sc_pm_func {
+	IMX_SC_PM_FUNC_UNKNOWN = 0,
+	IMX_SC_PM_FUNC_SET_SYS_POWER_MODE = 19,
+	IMX_SC_PM_FUNC_SET_PARTITION_POWER_MODE = 1,
+	IMX_SC_PM_FUNC_GET_SYS_POWER_MODE = 2,
+	IMX_SC_PM_FUNC_SET_RESOURCE_POWER_MODE = 3,
+	IMX_SC_PM_FUNC_GET_RESOURCE_POWER_MODE = 4,
+	IMX_SC_PM_FUNC_REQ_LOW_POWER_MODE = 16,
+	IMX_SC_PM_FUNC_SET_CPU_RESUME_ADDR = 17,
+	IMX_SC_PM_FUNC_REQ_SYS_IF_POWER_MODE = 18,
+	IMX_SC_PM_FUNC_SET_CLOCK_RATE = 5,
+	IMX_SC_PM_FUNC_GET_CLOCK_RATE = 6,
+	IMX_SC_PM_FUNC_CLOCK_ENABLE = 7,
+	IMX_SC_PM_FUNC_SET_CLOCK_PARENT = 14,
+	IMX_SC_PM_FUNC_GET_CLOCK_PARENT = 15,
+	IMX_SC_PM_FUNC_RESET = 13,
+	IMX_SC_PM_FUNC_RESET_REASON = 10,
+	IMX_SC_PM_FUNC_BOOT = 8,
+	IMX_SC_PM_FUNC_REBOOT = 9,
+	IMX_SC_PM_FUNC_REBOOT_PARTITION = 12,
+	IMX_SC_PM_FUNC_CPU_START = 11,
+};
+
+/*
+ * Defines for ALL parameters
+ */
+#define IMX_SC_PM_CLK_ALL		UINT8_MAX	/* All clocks */
+
+/*
+ * Defines for SC PM Power Mode
+ */
+#define IMX_SC_PM_PW_MODE_OFF	0	/* Power off */
+#define IMX_SC_PM_PW_MODE_STBY	1	/* Power in standby */
+#define IMX_SC_PM_PW_MODE_LP	2	/* Power in low-power */
+#define IMX_SC_PM_PW_MODE_ON	3	/* Power on */
+
+/*
+ * Defines for SC PM CLK
+ */
+#define IMX_SC_PM_CLK_SLV_BUS	0	/* Slave bus clock */
+#define IMX_SC_PM_CLK_MST_BUS	1	/* Master bus clock */
+#define IMX_SC_PM_CLK_PER	2	/* Peripheral clock */
+#define IMX_SC_PM_CLK_PHY	3	/* Phy clock */
+#define IMX_SC_PM_CLK_MISC	4	/* Misc clock */
+#define IMX_SC_PM_CLK_MISC0	0	/* Misc 0 clock */
+#define IMX_SC_PM_CLK_MISC1	1	/* Misc 1 clock */
+#define IMX_SC_PM_CLK_MISC2	2	/* Misc 2 clock */
+#define IMX_SC_PM_CLK_MISC3	3	/* Misc 3 clock */
+#define IMX_SC_PM_CLK_MISC4	4	/* Misc 4 clock */
+#define IMX_SC_PM_CLK_CPU	2	/* CPU clock */
+#define IMX_SC_PM_CLK_PLL	4	/* PLL */
+#define IMX_SC_PM_CLK_BYPASS	4	/* Bypass clock */
+
+/*
+ * Defines for SC PM CLK Parent
+ */
+#define IMX_SC_PM_PARENT_XTAL	0	/* Parent is XTAL. */
+#define IMX_SC_PM_PARENT_PLL0	1	/* Parent is PLL0 */
+#define IMX_SC_PM_PARENT_PLL1	2	/* Parent is PLL1 or PLL0/2 */
+#define IMX_SC_PM_PARENT_PLL2	3	/* Parent in PLL2 or PLL0/4 */
+#define IMX_SC_PM_PARENT_BYPS	4	/* Parent is a bypass clock. */
+
+#endif /* _SC_PM_API_H */