Commit e35f68d1 authored by Dmitry Baryshkov's avatar Dmitry Baryshkov

drm/msm/dpu: drop src_split and multirect check from dpu_crtc_atomic_check

Neither source split nor multirect are properly supported at this
moment. Both of these checks depend on normalized_zpos being equal for
several planes (which is never the case for normalized zpos).
Drop these checks to simplify dpu_crtc_atomic_check(). The actual
support for either of these features is not removed from the backend
code (sspp, ctl, etc).
Reviewed-by: default avatarAbhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: default avatarDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527332/
Link: https://lore.kernel.org/r/20230316161653.4106395-15-dmitry.baryshkov@linaro.orgSigned-off-by: default avatarDmitry Baryshkov <dmitry.baryshkov@linaro.org>
parent 0d06fb90
......@@ -1133,13 +1133,6 @@ static void dpu_crtc_enable(struct drm_crtc *crtc,
drm_crtc_vblank_on(crtc);
}
struct plane_state {
struct dpu_plane_state *dpu_pstate;
const struct drm_plane_state *drm_pstate;
int stage;
u32 pipe_id;
};
static bool dpu_crtc_needs_dirtyfb(struct drm_crtc_state *cstate)
{
struct drm_crtc *crtc = cstate->crtc;
......@@ -1161,31 +1154,22 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
crtc);
struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc_state);
struct plane_state *pstates;
const struct drm_plane_state *pstate;
struct drm_plane *plane;
struct drm_display_mode *mode;
int cnt = 0, rc = 0, mixer_width = 0, i, z_pos;
int rc = 0;
struct dpu_multirect_plane_states multirect_plane[DPU_STAGE_MAX * 2];
int multirect_count = 0;
const struct drm_plane_state *pipe_staged[SSPP_MAX];
int left_zpos_cnt = 0, right_zpos_cnt = 0;
struct drm_rect crtc_rect = { 0 };
bool needs_dirtyfb = dpu_crtc_needs_dirtyfb(crtc_state);
pstates = kzalloc(sizeof(*pstates) * DPU_STAGE_MAX * 4, GFP_KERNEL);
if (!pstates)
return -ENOMEM;
if (!crtc_state->enable || !crtc_state->active) {
DRM_DEBUG_ATOMIC("crtc%d -> enable %d, active %d, skip atomic_check\n",
crtc->base.id, crtc_state->enable,
crtc_state->active);
memset(&cstate->new_perf, 0, sizeof(cstate->new_perf));
goto end;
return 0;
}
mode = &crtc_state->adjusted_mode;
......@@ -1195,13 +1179,8 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
if (crtc_state->active_changed)
crtc_state->mode_changed = true;
memset(pipe_staged, 0, sizeof(pipe_staged));
if (cstate->num_mixers) {
mixer_width = mode->hdisplay / cstate->num_mixers;
if (cstate->num_mixers)
_dpu_crtc_setup_lm_bounds(crtc, crtc_state);
}
crtc_rect.x2 = mode->hdisplay;
crtc_rect.y2 = mode->vdisplay;
......@@ -1210,38 +1189,21 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
drm_atomic_crtc_state_for_each_plane_state(plane, pstate, crtc_state) {
struct dpu_plane_state *dpu_pstate = to_dpu_plane_state(pstate);
struct drm_rect dst, clip = crtc_rect;
int z_pos;
if (IS_ERR_OR_NULL(pstate)) {
rc = PTR_ERR(pstate);
DPU_ERROR("%s: failed to get plane%d state, %d\n",
dpu_crtc->name, plane->base.id, rc);
goto end;
return rc;
}
if (cnt >= DPU_STAGE_MAX * 4)
continue;
if (!pstate->visible)
continue;
pstates[cnt].dpu_pstate = dpu_pstate;
pstates[cnt].drm_pstate = pstate;
pstates[cnt].stage = pstate->normalized_zpos;
pstates[cnt].pipe_id = to_dpu_plane_state(pstate)->pipe.sspp->idx;
dpu_pstate->needs_dirtyfb = needs_dirtyfb;
if (pipe_staged[pstates[cnt].pipe_id]) {
multirect_plane[multirect_count].r0 =
pipe_staged[pstates[cnt].pipe_id];
multirect_plane[multirect_count].r1 = pstate;
multirect_count++;
pipe_staged[pstates[cnt].pipe_id] = NULL;
} else {
pipe_staged[pstates[cnt].pipe_id] = pstate;
}
cnt++;
dpu_plane_clear_multirect(pstate);
dst = drm_plane_state_dest(pstate);
if (!drm_rect_intersect(&clip, &dst)) {
......@@ -1249,63 +1211,21 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
DPU_ERROR("display: " DRM_RECT_FMT " plane: "
DRM_RECT_FMT "\n", DRM_RECT_ARG(&crtc_rect),
DRM_RECT_ARG(&dst));
rc = -E2BIG;
goto end;
return -E2BIG;
}
}
for (i = 1; i < SSPP_MAX; i++) {
if (pipe_staged[i])
dpu_plane_clear_multirect(pipe_staged[i]);
}
z_pos = -1;
for (i = 0; i < cnt; i++) {
/* reset counts at every new blend stage */
if (pstates[i].stage != z_pos) {
left_zpos_cnt = 0;
right_zpos_cnt = 0;
z_pos = pstates[i].stage;
}
z_pos = pstate->normalized_zpos;
/* verify z_pos setting before using it */
if (z_pos >= DPU_STAGE_MAX - DPU_STAGE_0) {
DPU_ERROR("> %d plane stages assigned\n",
DPU_STAGE_MAX - DPU_STAGE_0);
rc = -EINVAL;
goto end;
} else if (pstates[i].drm_pstate->crtc_x < mixer_width) {
if (left_zpos_cnt == 2) {
DPU_ERROR("> 2 planes @ stage %d on left\n",
z_pos);
rc = -EINVAL;
goto end;
}
left_zpos_cnt++;
} else {
if (right_zpos_cnt == 2) {
DPU_ERROR("> 2 planes @ stage %d on right\n",
z_pos);
rc = -EINVAL;
goto end;
}
right_zpos_cnt++;
return -EINVAL;
}
pstates[i].dpu_pstate->stage = z_pos + DPU_STAGE_0;
to_dpu_plane_state(pstate)->stage = z_pos + DPU_STAGE_0;
DRM_DEBUG_ATOMIC("%s: zpos %d\n", dpu_crtc->name, z_pos);
}
for (i = 0; i < multirect_count; i++) {
if (dpu_plane_validate_multirect_v2(&multirect_plane[i])) {
DPU_ERROR(
"multirect validation failed for planes (%d - %d)\n",
multirect_plane[i].r0->plane->base.id,
multirect_plane[i].r1->plane->base.id);
rc = -EINVAL;
goto end;
}
}
atomic_inc(&_dpu_crtc_get_kms(crtc)->bandwidth_ref);
......@@ -1314,74 +1234,10 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
if (rc) {
DPU_ERROR("crtc%d failed performance check %d\n",
crtc->base.id, rc);
goto end;
}
/* validate source split:
* use pstates sorted by stage to check planes on same stage
* we assume that all pipes are in source split so its valid to compare
* without taking into account left/right mixer placement
*/
for (i = 1; i < cnt; i++) {
struct plane_state *prv_pstate, *cur_pstate;
struct drm_rect left_rect, right_rect;
int32_t left_pid, right_pid;
int32_t stage;
prv_pstate = &pstates[i - 1];
cur_pstate = &pstates[i];
if (prv_pstate->stage != cur_pstate->stage)
continue;
stage = cur_pstate->stage;
left_pid = prv_pstate->dpu_pstate->base.plane->base.id;
left_rect = drm_plane_state_dest(prv_pstate->drm_pstate);
right_pid = cur_pstate->dpu_pstate->base.plane->base.id;
right_rect = drm_plane_state_dest(cur_pstate->drm_pstate);
if (right_rect.x1 < left_rect.x1) {
swap(left_pid, right_pid);
swap(left_rect, right_rect);
}
/**
* - planes are enumerated in pipe-priority order such that
* planes with lower drm_id must be left-most in a shared
* blend-stage when using source split.
* - planes in source split must be contiguous in width
* - planes in source split must have same dest yoff and height
*/
if (right_pid < left_pid) {
DPU_ERROR(
"invalid src split cfg. priority mismatch. stage: %d left: %d right: %d\n",
stage, left_pid, right_pid);
rc = -EINVAL;
goto end;
} else if (right_rect.x1 != drm_rect_width(&left_rect)) {
DPU_ERROR("non-contiguous coordinates for src split. "
"stage: %d left: " DRM_RECT_FMT " right: "
DRM_RECT_FMT "\n", stage,
DRM_RECT_ARG(&left_rect),
DRM_RECT_ARG(&right_rect));
rc = -EINVAL;
goto end;
} else if (left_rect.y1 != right_rect.y1 ||
drm_rect_height(&left_rect) != drm_rect_height(&right_rect)) {
DPU_ERROR("source split at stage: %d. invalid "
"yoff/height: left: " DRM_RECT_FMT " right: "
DRM_RECT_FMT "\n", stage,
DRM_RECT_ARG(&left_rect),
DRM_RECT_ARG(&right_rect));
rc = -EINVAL;
goto end;
}
return rc;
}
end:
kfree(pstates);
return rc;
return 0;
}
int dpu_crtc_vblank(struct drm_crtc *crtc, bool en)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment