Commit e37d4dff authored by Bob Copeland's avatar Bob Copeland Committed by John W. Linville

mac80211: fix a few typos in mac80211 kernel doc

Correct a handful of errors found while reading the mac80211 book.
Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
Acked-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 55887511
...@@ -99,7 +99,7 @@ enum ieee80211_max_queues { ...@@ -99,7 +99,7 @@ enum ieee80211_max_queues {
* The information provided in this structure is required for QoS * The information provided in this structure is required for QoS
* transmit queue configuration. Cf. IEEE 802.11 7.3.2.29. * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29.
* *
* @aifs: arbitration interface space [0..255] * @aifs: arbitration interframe space [0..255]
* @cw_min: minimum contention window [a value of the form * @cw_min: minimum contention window [a value of the form
* 2^n-1 in the range 1..32767] * 2^n-1 in the range 1..32767]
* @cw_max: maximum contention window [like @cw_min] * @cw_max: maximum contention window [like @cw_min]
...@@ -950,7 +950,7 @@ static inline void SET_IEEE80211_DEV(struct ieee80211_hw *hw, struct device *dev ...@@ -950,7 +950,7 @@ static inline void SET_IEEE80211_DEV(struct ieee80211_hw *hw, struct device *dev
} }
/** /**
* SET_IEEE80211_PERM_ADDR - set the permanenet MAC address for 802.11 hardware * SET_IEEE80211_PERM_ADDR - set the permanent MAC address for 802.11 hardware
* *
* @hw: the &struct ieee80211_hw to set the MAC address for * @hw: the &struct ieee80211_hw to set the MAC address for
* @addr: the address to set * @addr: the address to set
...@@ -1043,7 +1043,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, ...@@ -1043,7 +1043,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* This happens everytime the iv16 wraps around (every 65536 packets). The * This happens everytime the iv16 wraps around (every 65536 packets). The
* set_key() call will happen only once for each key (unless the AP did * set_key() call will happen only once for each key (unless the AP did
* rekeying), it will not include a valid phase 1 key. The valid phase 1 key is * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is
* provided by udpate_tkip_key only. The trigger that makes mac80211 call this * provided by update_tkip_key only. The trigger that makes mac80211 call this
* handler is software decryption with wrap around of iv16. * handler is software decryption with wrap around of iv16.
*/ */
...@@ -1177,7 +1177,7 @@ enum ieee80211_ampdu_mlme_action { ...@@ -1177,7 +1177,7 @@ enum ieee80211_ampdu_mlme_action {
* Must be implemented. * Must be implemented.
* *
* @add_interface: Called when a netdevice attached to the hardware is * @add_interface: Called when a netdevice attached to the hardware is
* enabled. Because it is not called for monitor mode devices, @open * enabled. Because it is not called for monitor mode devices, @start
* and @stop must be implemented. * and @stop must be implemented.
* The driver should perform any initialization it needs before * The driver should perform any initialization it needs before
* the device can be enabled. The initial configuration for the * the device can be enabled. The initial configuration for the
...@@ -1244,7 +1244,7 @@ enum ieee80211_ampdu_mlme_action { ...@@ -1244,7 +1244,7 @@ enum ieee80211_ampdu_mlme_action {
* the stack will not do fragmentation. * the stack will not do fragmentation.
* *
* @sta_notify: Notifies low level driver about addition or removal * @sta_notify: Notifies low level driver about addition or removal
* of assocaited station or AP. * of associated station or AP.
* *
* @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
* bursting) for a hardware TX queue. * bursting) for a hardware TX queue.
...@@ -1544,7 +1544,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, ...@@ -1544,7 +1544,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
* the next beacon frame from the 802.11 code. The low-level is responsible * the next beacon frame from the 802.11 code. The low-level is responsible
* for calling this function before beacon data is needed (e.g., based on * for calling this function before beacon data is needed (e.g., based on
* hardware interrupt). Returned skb is used only once and low-level driver * hardware interrupt). Returned skb is used only once and low-level driver
* is responsible of freeing it. * is responsible for freeing it.
*/ */
struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif); struct ieee80211_vif *vif);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment