[PCMCIA] e740 PCMCIA socket driver.

This patch adds the platform specific support needed to control the
PCMCIA hardware on the Toshiba e740.
Signed-off-by: Ian Molton <spyro@f2s.com>

drivers/pcmcia/Kconfig

@@ -217,7 +217,7 @@ config PCMCIA_PXA2XX
 	depends on ARM && ARCH_PXA && PCMCIA
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
-		    || ARCH_VIPER)
+		    || ARCH_VIPER || ARCH_PXA_ESERIES)
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
 

drivers/pcmcia/Makefile

@@ -72,5 +72,6 @@ pxa2xx-obj-$(CONFIG_ARCH_VIPER)			+= pxa2xx_viper.o
 pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
 pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
+pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_core.o $(pxa2xx-obj-y)

drivers/pcmcia/pxa2xx_e740.c

+/*
+ * Toshiba e740 PCMCIA specific routines.
+ *
+ * (c) 2004 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/eseries-gpio.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+
+static struct pcmcia_irqs cd_irqs[] = {
+	{
+		.sock = 0,
+		.irq  = IRQ_GPIO(GPIO_E740_PCMCIA_CD0),
+		.str  = "CF card detect"
+	},
+	{
+		.sock = 1,
+		.irq  = IRQ_GPIO(GPIO_E740_PCMCIA_CD1),
+		.str  = "Wifi switch"
+	},
+};
+
+static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	skt->irq = skt->nr == 0 ? IRQ_GPIO(GPIO_E740_PCMCIA_RDY0) :
+				IRQ_GPIO(GPIO_E740_PCMCIA_RDY1);
+
+	return soc_pcmcia_request_irqs(skt, &cd_irqs[skt->nr], 1);
+}
+
+/*
+ * Release all resources.
+ */
+static void e740_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_free_irqs(skt, &cd_irqs[skt->nr], 1);
+}
+
+static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+	if (skt->nr == 0) {
+		state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD0) ? 0 : 1;
+		state->ready  = gpio_get_value(GPIO_E740_PCMCIA_RDY0) ? 1 : 0;
+	} else {
+		state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD1) ? 0 : 1;
+		state->ready  = gpio_get_value(GPIO_E740_PCMCIA_RDY1) ? 1 : 0;
+	}
+
+	state->vs_3v  = 1;
+	state->bvd1   = 1;
+	state->bvd2   = 1;
+	state->wrprot = 0;
+	state->vs_Xv  = 0;
+}
+
+static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+					const socket_state_t *state)
+{
+	if (state->flags & SS_RESET) {
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_RST0, 1);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_RST1, 1);
+	} else {
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_RST0, 0);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_RST1, 0);
+	}
+
+	switch (state->Vcc) {
+	case 0:	/* Socket off */
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1);
+		break;
+	case 50:
+	case 33: /* socket on */
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0);
+		break;
+	default:
+		printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc);
+	}
+
+	return 0;
+}
+
+/*
+ * Enable card status IRQs on (re-)initialisation.  This can
+ * be called at initialisation, power management event, or
+ * pcmcia event.
+ */
+static void e740_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_enable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs));
+}
+
+/*
+ * Disable card status IRQs on suspend.
+ */
+static void e740_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_disable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs));
+}
+
+static struct pcmcia_low_level e740_pcmcia_ops = {
+	.owner            = THIS_MODULE,
+	.hw_init          = e740_pcmcia_hw_init,
+	.hw_shutdown      = e740_pcmcia_hw_shutdown,
+	.socket_state     = e740_pcmcia_socket_state,
+	.configure_socket = e740_pcmcia_configure_socket,
+	.socket_init      = e740_pcmcia_socket_init,
+	.socket_suspend   = e740_pcmcia_socket_suspend,
+	.nr               = 2,
+};
+
+static struct platform_device *e740_pcmcia_device;
+
+static int __init e740_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_e740())
+		return -ENODEV;
+
+	e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!e740_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops,
+					sizeof(e740_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(e740_pcmcia_device);
+
+	if (ret)
+		platform_device_put(e740_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit e740_pcmcia_exit(void)
+{
+	platform_device_unregister(e740_pcmcia_device);
+}
+
+module_init(e740_pcmcia_init);
+module_exit(e740_pcmcia_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_DESCRIPTION("e740 PCMCIA platform support");