Merge branch 'nfc-s3fwrn5-Change-I2C-interrupt-trigger-to-EDGE_RISING'

Bongsu Jeon says:

====================
nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING

For stable Samsung's I2C interrupt handling, I changed the interrupt
trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed
the hard coded interrupt trigger type in the i2c module for the flexible
control.

1/2 is the changed dt binding for the edge rising trigger.
2/2 is to remove the hard coded interrupt trigger type in the i2c module.

ChangeLog:
 v2:
  2/2
   - remove the hard coded interrupt trigger type.

Bongsu Jeon (2):
  dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger to
    EDGE_RISING
  nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c
    module
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml

@@ -76,7 +76,7 @@ examples:
             reg = <0x27>;
 
             interrupt-parent = <&gpa1>;
-            interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+            interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 
             en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
             wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;

drivers/nfc/s3fwrn5/i2c.c

@@ -179,6 +179,8 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
 				  const struct i2c_device_id *id)
 {
 	struct s3fwrn5_i2c_phy *phy;
+	struct irq_data *irq_data;
+	unsigned long irqflags;
 	int ret;
 
 	phy = devm_kzalloc(&client->dev, sizeof(*phy), GFP_KERNEL);
@@ -212,8 +214,11 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
+	irq_data = irq_get_irq_data(client->irq);
+	irqflags = irqd_get_trigger_type(irq_data) | IRQF_ONESHOT;
+
 	ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL,
-		s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+		s3fwrn5_i2c_irq_thread_fn, irqflags,
 		S3FWRN5_I2C_DRIVER_NAME, phy);
 	if (ret)
 		s3fwrn5_remove(phy->common.ndev);