Commit e3c9d9d6 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: dts: imx53-qsb: Fix regulator constraints

Since commit fa93fd4e ("regulator: core: Ensure we are at least in
bounds for our constraints") the imx53-qsb board populated with a Dialog
DA9053 PMIC fails to boot:

LDO3: Bringing 3300000uV into 1800000-1800000uV

The LDO3 voltage constraints passed in the device tree do not match
the valid range according to the datasheet, so fix this accordingly to
allow the board booting again.

While at it, fix the other voltage constraints as well.

Cc: <stable@vger.kernel.org> # 4.7.x
Signed-off-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 4edd601c
...@@ -64,8 +64,8 @@ ldo2_reg: ldo2 { ...@@ -64,8 +64,8 @@ ldo2_reg: ldo2 {
}; };
ldo3_reg: ldo3 { ldo3_reg: ldo3 {
regulator-min-microvolt = <600000>; regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <1800000>; regulator-max-microvolt = <3300000>;
regulator-always-on; regulator-always-on;
}; };
...@@ -76,8 +76,8 @@ ldo4_reg: ldo4 { ...@@ -76,8 +76,8 @@ ldo4_reg: ldo4 {
}; };
ldo5_reg: ldo5 { ldo5_reg: ldo5 {
regulator-min-microvolt = <1725000>; regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>; regulator-max-microvolt = <3600000>;
regulator-always-on; regulator-always-on;
}; };
...@@ -100,14 +100,14 @@ ldo8_reg: ldo8 { ...@@ -100,14 +100,14 @@ ldo8_reg: ldo8 {
}; };
ldo9_reg: ldo9 { ldo9_reg: ldo9 {
regulator-min-microvolt = <1200000>; regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3600000>; regulator-max-microvolt = <3600000>;
regulator-always-on; regulator-always-on;
}; };
ldo10_reg: ldo10 { ldo10_reg: ldo10 {
regulator-min-microvolt = <1250000>; regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3650000>; regulator-max-microvolt = <3600000>;
regulator-always-on; regulator-always-on;
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment