Commit e3fff693 authored by Animesh Agarwal's avatar Animesh Agarwal Committed by Mark Brown

ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema

Convert the Cirrus Logic CS42448/CS42888 audio CODEC bindings to DT
schema format. Set power supply properties to required only for CS42888.

Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: default avatarAnimesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: default avatarRob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240710072756.99765-1-animeshagarwal28@gmail.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent ee3f77a3
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/cirrus,cs42xx8.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cirrus Logic CS42448/CS42888 audio CODEC
maintainers:
- patches@opensource.cirrus.com
properties:
compatible:
enum:
- cirrus,cs42448
- cirrus,cs42888
reg:
maxItems: 1
clocks:
minItems: 1
maxItems: 2
clock-names:
const: mclk
VA-supply:
description: Analog power supply.
VD-supply:
description: Digital power supply.
VLC-supply:
description: Control port power supply
VLS-supply:
description: Serial port interface power supply.
reset-gpios:
description: This pin is connected to the chip's RESET pin.
maxItems: 1
required:
- compatible
- reg
- clocks
- clock-names
if:
properties:
compatible:
contains:
const: cirrus,cs42888
then:
required:
- VA-supply
- VD-supply
- VLC-supply
- VLS-supply
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
codec@48 {
compatible = "cirrus,cs42888";
reg = <0x48>;
clocks = <&codec_mclk 0>;
clock-names = "mclk";
VA-supply = <&reg_audio>;
VD-supply = <&reg_audio>;
VLS-supply = <&reg_audio>;
VLC-supply = <&reg_audio>;
reset-gpios = <&gpio 1>;
};
};
CS42448/CS42888 audio CODEC
Required properties:
- compatible : must contain one of "cirrus,cs42448" and "cirrus,cs42888"
- reg : the I2C address of the device for I2C
- clocks : a list of phandles + clock-specifiers, one for each entry in
clock-names
- clock-names : must contain "mclk"
- VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device,
as covered in Documentation/devicetree/bindings/regulator/regulator.txt
Optional properties:
- reset-gpios : a GPIO spec to define which pin is connected to the chip's
!RESET pin
Example:
cs42888: codec@48 {
compatible = "cirrus,cs42888";
reg = <0x48>;
clocks = <&codec_mclk 0>;
clock-names = "mclk";
VA-supply = <&reg_audio>;
VD-supply = <&reg_audio>;
VLS-supply = <&reg_audio>;
VLC-supply = <&reg_audio>;
reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment