Commit e42b650f authored by Tomer Maimon's avatar Tomer Maimon Committed by Joel Stanley

ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB

Add the following new device nodes to NPCM750 evolution board device
tree:

        - NPCM7xx Pin controller and GPIO
        - NPCM7xx PWM and FAN
        - NPCM7xx EHCI USB
        - NPCM7xx KCS
        - NPCM Reset
        - NPCM Peripheral SPI
        - NPCM FIU SPI
        - NPCM HWRNG
        - NPCM I2C
        - STMicro STMMAC
Signed-off-by: default avatarTomer Maimon <tmaimon77@gmail.com>
Reviewed-by: default avatarJoel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200929131807.15378-6-tmaimon77@gmail.comSigned-off-by: default avatarJoel Stanley <joel@jms.id.au>
parent 77c72b33
......@@ -4,24 +4,161 @@
/dts-v1/;
#include "nuvoton-npcm750.dtsi"
#include "dt-bindings/gpio/gpio.h"
#include "nuvoton-npcm750-pincfg-evb.dtsi"
/ {
model = "Nuvoton npcm750 Development Board (Device Tree)";
compatible = "nuvoton,npcm750";
aliases {
ethernet2 = &gmac0;
ethernet3 = &gmac1;
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
i2c7 = &i2c7;
i2c8 = &i2c8;
i2c9 = &i2c9;
i2c10 = &i2c10;
i2c11 = &i2c11;
i2c12 = &i2c12;
i2c13 = &i2c13;
i2c14 = &i2c14;
i2c15 = &i2c15;
spi0 = &spi0;
spi1 = &spi1;
fiu0 = &fiu0;
fiu1 = &fiu3;
fiu2 = &fiux;
};
chosen {
stdout-path = &serial3;
};
memory {
reg = <0 0x40000000>;
device_type = "memory";
reg = <0x0 0x20000000>;
};
};
&gmac0 {
phy-mode = "rgmii-id";
status = "okay";
};
&gmac1 {
phy-mode = "rgmii-id";
status = "okay";
};
&ehci1 {
status = "okay";
};
&fiu0 {
status = "okay";
spi-nor@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-rx-bus-width = <2>;
reg = <0>;
spi-max-frequency = <5000000>;
partitions@80000000 {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
bbuboot1@0 {
label = "bb-uboot-1";
reg = <0x0000000 0x80000>;
read-only;
};
bbuboot2@80000 {
label = "bb-uboot-2";
reg = <0x0080000 0x80000>;
read-only;
};
envparam@100000 {
label = "env-param";
reg = <0x0100000 0x40000>;
read-only;
};
spare@140000 {
label = "spare";
reg = <0x0140000 0xC0000>;
};
kernel@200000 {
label = "kernel";
reg = <0x0200000 0x400000>;
};
rootfs@600000 {
label = "rootfs";
reg = <0x0600000 0x700000>;
};
spare1@D00000 {
label = "spare1";
reg = <0x0D00000 0x200000>;
};
spare2@0F00000 {
label = "spare2";
reg = <0x0F00000 0x200000>;
};
spare3@1100000 {
label = "spare3";
reg = <0x1100000 0x200000>;
};
spare4@1300000 {
label = "spare4";
reg = <0x1300000 0x0>;
};
};
};
};
&fiu3 {
pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>;
status = "okay";
spi-nor@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-rx-bus-width = <2>;
reg = <0>;
spi-max-frequency = <5000000>;
partitions@A0000000 {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
system1@0 {
label = "spi3-system1";
reg = <0x0 0x0>;
};
};
};
};
&fiux {
spix-mode;
};
&watchdog1 {
status = "okay";
};
&rng {
status = "okay";
};
&serial0 {
status = "okay";
};
......@@ -37,3 +174,231 @@ &serial2 {
&serial3 {
status = "okay";
};
&adc {
status = "okay";
};
&lpc_kcs {
kcs1: kcs1@0 {
status = "okay";
};
kcs2: kcs2@0 {
status = "okay";
};
kcs3: kcs3@0 {
status = "okay";
};
};
/* lm75 on SVB */
&i2c0 {
clock-frequency = <100000>;
status = "okay";
lm75@48 {
compatible = "lm75";
reg = <0x48>;
status = "okay";
};
};
/* lm75 on EB */
&i2c1 {
clock-frequency = <100000>;
status = "okay";
lm75@48 {
compatible = "lm75";
reg = <0x48>;
status = "okay";
};
};
/* tmp100 on EB */
&i2c2 {
clock-frequency = <100000>;
status = "okay";
tmp100@48 {
compatible = "tmp100";
reg = <0x48>;
status = "okay";
};
};
&i2c3 {
clock-frequency = <100000>;
status = "okay";
};
&i2c5 {
clock-frequency = <100000>;
status = "okay";
};
/* tmp100 on SVB */
&i2c6 {
clock-frequency = <100000>;
status = "okay";
tmp100@48 {
compatible = "tmp100";
reg = <0x48>;
status = "okay";
};
};
&i2c7 {
clock-frequency = <100000>;
status = "okay";
};
&i2c8 {
clock-frequency = <100000>;
status = "okay";
};
&i2c9 {
clock-frequency = <100000>;
status = "okay";
};
&i2c10 {
clock-frequency = <100000>;
status = "okay";
};
&i2c11 {
clock-frequency = <100000>;
status = "okay";
};
&i2c14 {
clock-frequency = <100000>;
status = "okay";
};
&pwm_fan {
status = "okay";
fan@0 {
reg = <0x00>;
fan-tach-ch = /bits/ 8 <0x00 0x01>;
cooling-levels = <127 255>;
};
fan@1 {
reg = <0x01>;
fan-tach-ch = /bits/ 8 <0x02 0x03>;
cooling-levels = /bits/ 8 <127 255>;
};
fan@2 {
reg = <0x02>;
fan-tach-ch = /bits/ 8 <0x04 0x05>;
cooling-levels = /bits/ 8 <127 255>;
};
fan@3 {
reg = <0x03>;
fan-tach-ch = /bits/ 8 <0x06 0x07>;
cooling-levels = /bits/ 8 <127 255>;
};
fan@4 {
reg = <0x04>;
fan-tach-ch = /bits/ 8 <0x08 0x09>;
cooling-levels = /bits/ 8 <127 255>;
};
fan@5 {
reg = <0x05>;
fan-tach-ch = /bits/ 8 <0x0A 0x0B>;
cooling-levels = /bits/ 8 <127 255>;
};
fan@6 {
reg = <0x06>;
fan-tach-ch = /bits/ 8 <0x0C 0x0D>;
cooling-levels = /bits/ 8 <127 255>;
};
fan@7 {
reg = <0x07>;
fan-tach-ch = /bits/ 8 <0x0E 0x0F>;
cooling-levels = /bits/ 8 <127 255>;
};
};
&spi0 {
cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
status = "okay";
Flash@0 {
compatible = "winbond,w25q128",
"jedec,spi-nor";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <5000000>;
partition@0 {
label = "spi0_spare1";
reg = <0x0000000 0x800000>;
};
partition@1 {
label = "spi0_spare2";
reg = <0x800000 0x0>;
};
};
};
&spi1 {
cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
status = "okay";
Flash@0 {
compatible = "winbond,w25q128fw",
"jedec,spi-nor";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <5000000>;
partition@0 {
label = "spi1_spare1";
reg = <0x0000000 0x800000>;
};
partition@1 {
label = "spi1_spare2";
reg = <0x800000 0x0>;
};
};
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = < &iox1_pins
&pin8_input
&pin9_output_high
&pin10_input
&pin11_output_high
&pin16_input
&pin24_output_high
&pin25_output_low
&pin32_output_high
&jtag2_pins
&pin61_output_high
&pin62_output_high
&pin63_output_high
&lpc_pins
&pin160_input
&pin162_input
&pin168_input
&pin169_input
&pin170_input
&pin187_output_high
&pin190_input
&pin191_output_high
&pin192_output_high
&pin197_output_low
&ddc_pins
&pin218_input
&pin219_output_low
&pin220_output_low
&pin221_output_high
&pin222_input
&pin223_output_low
&spix_pins
&pin228_output_low
&pin231_output_high
&pin255_input>;
};
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018 Nuvoton Technology
/ {
pinctrl: pinctrl@f0800000 {
pin8_input: pin8-input {
pins = "GPIO8/LKGPO1";
bias-disable;
input-enable;
};
pin9_output_high: pin9-output-high {
pins = "GPIO9/LKGPO2";
bias-disable;
output-high;
};
pin10_input: pin10-input {
pins = "GPIO10/IOXHLD";
bias-disable;
input-enable;
};
pin11_output_high: pin11-output-high {
pins = "GPIO11/IOXHCK";
bias-disable;
output-high;
};
pin16_input: pin16-input {
pins = "GPIO16/LKGPO0";
bias-disable;
input-enable;
};
pin24_output_high: pin24-output-high {
pins = "GPIO24/IOXHDO";
bias-disable;
output-high;
};
pin25_output_low: pin25-output-low {
pins = "GPIO25/IOXHDI";
bias-disable;
output-low;
};
pin32_output_high: pin32-output-high {
pins = "GPIO32/nSPI0CS1";
bias-disable;
output-high;
};
pin61_output_high: pin61-output-high {
pins = "GPO61/nDTR1_BOUT1/STRAP6";
bias-disable;
output-high;
};
pin62_output_high: pin62-output-high {
pins = "GPO62/nRTST1/STRAP5";
bias-disable;
output-high;
};
pin63_output_high: pin63-output-high {
pins = "GPO63/TXD1/STRAP4";
bias-disable;
output-high;
};
pin160_input: pin160-input {
pins = "GPIO160/CLKOUT/RNGOSCOUT";
bias-disable;
input-enable;
};
pin162_input: pin162-input {
pins = "GPIO162/SERIRQ";
bias-disable;
input-enable;
};
pin168_input: pin168-input {
pins = "GPIO168/nCLKRUN/nESPIALERT";
bias-disable;
input-enable;
};
pin169_input: pin169-input {
pins = "GPIO169/nSCIPME";
bias-disable;
input-enable;
};
pin170_input: pin170-input {
pins = "GPIO170/nSMI";
bias-disable;
input-enable;
};
pin187_output_high: pin187-output-high {
pins = "GPIO187/nSPI3CS1";
bias-disable;
output-high;
};
pin190_input: pin190-input {
pins = "GPIO190/nPRD_SMI";
bias-disable;
input-enable;
};
pin191_output_high: pin191-output-high {
pins = "GPIO191";
bias-disable;
output-high;
};
pin192_output_high: pin192-output-high {
pins = "GPIO192";
bias-disable;
output-high;
};
pin197_output_low: pin197-output-low {
pins = "GPIO197/SMB0DEN";
bias-disable;
output-low;
};
pin218_input: pin218-input {
pins = "GPIO218/nWDO1";
bias-disable;
input-enable;
};
pin219_output_low: pin219-output-low {
pins = "GPIO219/nWDO2";
bias-disable;
output-low;
};
pin220_output_low: pin220-output-low {
pins = "GPIO220/SMB12SCL";
bias-disable;
output-low;
};
pin221_output_high: pin221-output-high {
pins = "GPIO221/SMB12SDA";
bias-disable;
output-high;
};
pin222_input: pin222-input {
pins = "GPIO222/SMB13SCL";
bias-disable;
input-enable;
};
pin223_output_low: pin223-output-low {
pins = "GPIO223/SMB13SDA";
bias-disable;
output-low;
};
pin228_output_low: pin228-output-low {
pins = "GPIO228/nSPIXCS1";
bias-disable;
output-low;
};
pin231_output_high: pin231-output-high {
pins = "GPIO230/SPIXD3";
bias-disable;
output-high;
};
pin255_input: pin255-input {
pins = "GPI255/DACOSEL";
bias-disable;
input-enable;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment