Skip to content

L
linux
Commit e43abe6f authored by Sundar Iyer's avatar Sundar Iyer Committed by Linus Walleij
Browse files
Options

mach-ux500: move keymaps to new file 

Move keylayouts to a dedicated file and plug these keylayouts
for input platform data. This will make addition of new and custom
keylayouts localized.
Signed-off-by: default avatarSundar Iyer <sundar.iyer@stericsson.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@stericsson.com>
parent 593e9d70
Hide whitespace changes
Inline Side-by-side
Showing with 140 additions and 111 deletions
arch/arm/mach-ux500/Makefile
View file @ e43abe6f
......@@ -5,7 +5,8 @@
obj-y := clock.o cpu.o devices.o devices-common.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o
obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o
obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o \
board-mop500-keypads.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
......
arch/arm/mach-ux500/board-mop500-keypads.c 0 → 100644
View file @ e43abe6f
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
*
* Keypad layouts for various boards
*/
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/mfd/stmpe.h>
#include <linux/input/matrix_keypad.h>
#include <plat/pincfg.h>
#include <plat/ske.h>
#include <mach/devices.h>
#include <mach/hardware.h>
#include "devices-db8500.h"
#include "board-mop500.h"
/* STMPE/SKE keypad use this key layout */
static const unsigned int mop500_keymap[] = {
KEY(2, 5, KEY_END),
KEY(4, 1, KEY_POWER),
KEY(3, 5, KEY_VOLUMEDOWN),
KEY(1, 3, KEY_3),
KEY(5, 2, KEY_RIGHT),
KEY(5, 0, KEY_9),
KEY(0, 5, KEY_MENU),
KEY(7, 6, KEY_ENTER),
KEY(4, 5, KEY_0),
KEY(6, 7, KEY_2),
KEY(3, 4, KEY_UP),
KEY(3, 3, KEY_DOWN),
KEY(6, 4, KEY_SEND),
KEY(6, 2, KEY_BACK),
KEY(4, 2, KEY_VOLUMEUP),
KEY(5, 5, KEY_1),
KEY(4, 3, KEY_LEFT),
KEY(3, 2, KEY_7),
};
static const struct matrix_keymap_data mop500_keymap_data = {
.keymap = mop500_keymap,
.keymap_size = ARRAY_SIZE(mop500_keymap),
};
/*
* Nomadik SKE keypad
*/
#define ROW_PIN_I0 164
#define ROW_PIN_I1 163
#define ROW_PIN_I2 162
#define ROW_PIN_I3 161
#define ROW_PIN_I4 156
#define ROW_PIN_I5 155
#define ROW_PIN_I6 154
#define ROW_PIN_I7 153
#define COL_PIN_O0 168
#define COL_PIN_O1 167
#define COL_PIN_O2 166
#define COL_PIN_O3 165
#define COL_PIN_O4 160
#define COL_PIN_O5 159
#define COL_PIN_O6 158
#define COL_PIN_O7 157
#define SKE_KPD_MAX_ROWS 8
#define SKE_KPD_MAX_COLS 8
static int ske_kp_rows[] = {
ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
};
/*
* ske_set_gpio_row: request and set gpio rows
*/
static int ske_set_gpio_row(int gpio)
{
int ret;
ret = gpio_request(gpio, "ske-kp");
if (ret < 0) {
pr_err("ske_set_gpio_row: gpio request failed\n");
return ret;
}
ret = gpio_direction_output(gpio, 1);
if (ret < 0) {
pr_err("ske_set_gpio_row: gpio direction failed\n");
gpio_free(gpio);
}
return ret;
}
/*
* ske_kp_init - enable the gpio configuration
*/
static int ske_kp_init(void)
{
int ret, i;
for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
ret = ske_set_gpio_row(ske_kp_rows[i]);
if (ret < 0) {
pr_err("ske_kp_init: failed init\n");
return ret;
}
}
return 0;
}
static struct ske_keypad_platform_data ske_keypad_board = {
.init = ske_kp_init,
.keymap_data = &mop500_keymap_data,
.no_autorepeat = true,
.krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */
.kcol = SKE_KPD_MAX_COLS,
.debounce_ms = 40, /* in millisecs */
};
void mop500_keypad_init(void)
{
db8500_add_ske_keypad(&ske_keypad_board);
}
arch/arm/mach-ux500/board-mop500.c
View file @ e43abe6f
......@@ -26,7 +26,6 @@
#include <plat/pincfg.h>
#include <plat/i2c.h>
#include <plat/ske.h>
#include <mach/hardware.h>
#include <mach/setup.h>
......@@ -172,116 +171,8 @@ static void __init mop500_i2c_init(void)
db8500_add_i2c3(&u8500_i2c3_data);
}
static const unsigned int ux500_keymap[] = {
KEY(2, 5, KEY_END),
KEY(4, 1, KEY_POWER),
KEY(3, 5, KEY_VOLUMEDOWN),
KEY(1, 3, KEY_3),
KEY(5, 2, KEY_RIGHT),
KEY(5, 0, KEY_9),
KEY(0, 5, KEY_MENU),
KEY(7, 6, KEY_ENTER),
KEY(4, 5, KEY_0),
KEY(6, 7, KEY_2),
KEY(3, 4, KEY_UP),
KEY(3, 3, KEY_DOWN),
KEY(6, 4, KEY_SEND),
KEY(6, 2, KEY_BACK),
KEY(4, 2, KEY_VOLUMEUP),
KEY(5, 5, KEY_1),
KEY(4, 3, KEY_LEFT),
KEY(3, 2, KEY_7),
};
static const struct matrix_keymap_data ux500_keymap_data = {
.keymap = ux500_keymap,
.keymap_size = ARRAY_SIZE(ux500_keymap),
};
/*
* Nomadik SKE keypad
*/
#define ROW_PIN_I0 164
#define ROW_PIN_I1 163
#define ROW_PIN_I2 162
#define ROW_PIN_I3 161
#define ROW_PIN_I4 156
#define ROW_PIN_I5 155
#define ROW_PIN_I6 154
#define ROW_PIN_I7 153
#define COL_PIN_O0 168
#define COL_PIN_O1 167
#define COL_PIN_O2 166
#define COL_PIN_O3 165
#define COL_PIN_O4 160
#define COL_PIN_O5 159
#define COL_PIN_O6 158
#define COL_PIN_O7 157
#define SKE_KPD_MAX_ROWS 8
#define SKE_KPD_MAX_COLS 8
static int ske_kp_rows[] = {
ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
};
/*
* ske_set_gpio_row: request and set gpio rows
*/
static int ske_set_gpio_row(int gpio)
{
int ret;
ret = gpio_request(gpio, "ske-kp");
if (ret < 0) {
pr_err("ske_set_gpio_row: gpio request failed\n");
return ret;
}
ret = gpio_direction_output(gpio, 1);
if (ret < 0) {
pr_err("ske_set_gpio_row: gpio direction failed\n");
gpio_free(gpio);
}
return ret;
}
/*
* ske_kp_init - enable the gpio configuration
*/
static int ske_kp_init(void)
{
int ret, i;
for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
ret = ske_set_gpio_row(ske_kp_rows[i]);
if (ret < 0) {
pr_err("ske_kp_init: failed init\n");
return ret;
}
}
return 0;
}
static struct ske_keypad_platform_data ske_keypad_board = {
.init = ske_kp_init,
.keymap_data = &ux500_keymap_data,
.no_autorepeat = true,
.krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */
.kcol = SKE_KPD_MAX_COLS,
.debounce_ms = 40, /* in millsecs */
};
/* add any platform devices here - TODO */
static struct platform_device *platform_devs[] __initdata = {
&ux500_ske_keypad_device,
};
static void __init mop500_spi_init(void)
......@@ -309,6 +200,8 @@ static void __init u8500_init_machine(void)
mop500_spi_init();
mop500_uart_init();
mop500_keypad_init();
platform_device_register(&ab8500_device);
i2c_register_board_info(0, mop500_i2c0_devices,
......
arch/arm/mach-ux500/board-mop500.h
View file @ e43abe6f
......@@ -16,5 +16,6 @@
extern void mop500_sdi_init(void);
extern void mop500_sdi_tc35892_init(void);
extern void mop500_keypad_init(void);
#endif
arch/arm/mach-ux500/devices-db8500.c
View file @ e43abe6f
......@@ -128,7 +128,7 @@ struct resource keypad_resources[] = {
},
};
struct platform_device ux500_ske_keypad_device = {
struct platform_device u8500_ske_keypad_device = {
.name = "nmk-ske-keypad",
.id = -1,
.num_resources = ARRAY_SIZE(keypad_resources),
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7