Commit e45d1f52 authored by Russell King's avatar Russell King Committed by David S. Miller

net: phylink: support Clause 45 PHYs on SFP+ modules

Some SFP+ modules have Clause 45 PHYs embedded on them, which need a
little more handling in order to ensure that they are correctly setup,
as they switch the PHY link mode according to the negotiated speed.

With Clause 22 PHYs, we assumed that they would operate in SGMII mode,
but this assumption is now false.  Adapt phylink to support Clause 45
PHYs on SFP+ modules.
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 938d44c2
......@@ -711,7 +711,8 @@ static void phylink_phy_change(struct phy_device *phydev, bool up,
phy_duplex_to_str(phydev->duplex));
}
static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
phy_interface_t interface)
{
struct phylink_link_state config;
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
......@@ -729,7 +730,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
memset(&config, 0, sizeof(config));
linkmode_copy(supported, phy->supported);
linkmode_copy(config.advertising, phy->advertising);
config.interface = pl->link_config.interface;
config.interface = interface;
ret = phylink_validate(pl, supported, &config);
if (ret)
......@@ -745,6 +746,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
mutex_lock(&phy->lock);
mutex_lock(&pl->state_mutex);
pl->phydev = phy;
pl->phy_state.interface = interface;
linkmode_copy(pl->supported, supported);
linkmode_copy(pl->link_config.advertising, config.advertising);
......@@ -807,7 +809,7 @@ int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
if (ret < 0)
return ret;
ret = phylink_bringup_phy(pl, phy);
ret = phylink_bringup_phy(pl, phy, pl->link_config.interface);
if (ret)
phy_detach(phy);
......@@ -860,7 +862,7 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
if (!phy_dev)
return -ENODEV;
ret = phylink_bringup_phy(pl, phy_dev);
ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
if (ret)
phy_detach(phy_dev);
......@@ -1809,13 +1811,22 @@ static void phylink_sfp_link_up(void *upstream)
static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
{
struct phylink *pl = upstream;
phy_interface_t interface = pl->link_config.interface;
int ret;
ret = phylink_attach_phy(pl, phy, pl->link_config.interface);
if (ret < 0)
return ret;
ret = phylink_bringup_phy(pl, phy);
/* Clause 45 PHYs switch their Serdes lane between several different
* modes, normally 10GBASE-R, SGMII. Some use 2500BASE-X for 2.5G
* speeds. We really need to know which interface modes the PHY and
* MAC supports to properly work out which linkmodes can be supported.
*/
if (phy->is_c45)
interface = PHY_INTERFACE_MODE_NA;
ret = phylink_bringup_phy(pl, phy, interface);
if (ret)
phy_detach(phy);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment