msm:disp:dpu1: add UBWC support for display on SC7180

Add UBWC global configuration for display on
SC7180 target.
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Fixes: 73bfb790 ("msm:disp:dpu1: setup display datapath for SC7180 target")
Signed-off-by: Rob Clark <robdclark@chromium.org>

drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c

@@ -12,6 +12,7 @@
 
 #define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
 
+#define HW_REV				0x0
 #define HW_INTR_STATUS			0x0010
 
 /* Max BW defined in KBps */
@@ -22,6 +23,17 @@ struct dpu_irq_controller {
 	struct irq_domain *domain;
 };
 
+struct dpu_hw_cfg {
+	u32 val;
+	u32 offset;
+};
+
+struct dpu_mdss_hw_init_handler {
+	u32 hw_rev;
+	u32 hw_reg_count;
+	struct dpu_hw_cfg* hw_cfg;
+};
+
 struct dpu_mdss {
 	struct msm_mdss base;
 	void __iomem *mmio;
@@ -32,6 +44,44 @@ struct dpu_mdss {
 	u32 num_paths;
 };
 
+static struct dpu_hw_cfg hw_cfg[] = {
+    {
+	/* UBWC global settings */
+	.val = 0x1E,
+	.offset = 0x144,
+    }
+};
+
+static struct dpu_mdss_hw_init_handler cfg_handler[] = {
+    { .hw_rev = DPU_HW_VER_620,
+      .hw_reg_count = ARRAY_SIZE(hw_cfg),
+      .hw_cfg = hw_cfg
+    },
+};
+
+static void dpu_mdss_hw_init(struct dpu_mdss *dpu_mdss, u32 hw_rev)
+{
+	int i;
+	u32 count = 0;
+	struct dpu_hw_cfg *hw_cfg = NULL;
+
+	for (i = 0; i < ARRAY_SIZE(cfg_handler); i++) {
+		if (cfg_handler[i].hw_rev == hw_rev) {
+			hw_cfg = cfg_handler[i].hw_cfg;
+			count = cfg_handler[i].hw_reg_count;
+			break;
+	    }
+	}
+
+	for (i = 0; i < count; i++ ) {
+		writel_relaxed(hw_cfg->val,
+			dpu_mdss->mmio + hw_cfg->offset);
+		hw_cfg++;
+	}
+
+    return;
+}
+
 static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
 						struct dpu_mdss *dpu_mdss)
 {
@@ -174,12 +224,18 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
 	struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
 	struct dss_module_power *mp = &dpu_mdss->mp;
 	int ret;
+	u32 mdss_rev;
 
 	dpu_mdss_icc_request_bw(mdss);
 
 	ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
-	if (ret)
+	if (ret) {
 		DPU_ERROR("clock enable failed, ret:%d\n", ret);
+		return ret;
+	}
+
+	mdss_rev = readl_relaxed(dpu_mdss->mmio + HW_REV);
+	dpu_mdss_hw_init(dpu_mdss, mdss_rev);
 
 	return ret;
 }