Commit e530d080 authored by Allen-KH Cheng's avatar Allen-KH Cheng Committed by Matthias Brugger
parent b2edd519
......@@ -716,6 +716,41 @@ xhci: usb@11200000 {
status = "disabled";
};
pcie: pcie@11230000 {
compatible = "mediatek,mt8192-pcie";
device_type = "pci";
reg = <0 0x11230000 0 0x2000>;
reg-names = "pcie-mac";
#address-cells = <3>;
#size-cells = <2>;
clocks = <&infracfg CLK_INFRA_PCIE_PL_P_250M>,
<&infracfg CLK_INFRA_PCIE_TL_26M>,
<&infracfg CLK_INFRA_PCIE_TL_96M>,
<&infracfg CLK_INFRA_PCIE_TL_32K>,
<&infracfg CLK_INFRA_PCIE_PERI_26M>,
<&infracfg CLK_INFRA_PCIE_TOP_H_133M>;
clock-names = "pl_250m", "tl_26m", "tl_96m",
"tl_32k", "peri_26m", "top_133m";
assigned-clocks = <&topckgen CLK_TOP_TL_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D6_D4>;
interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x12000000 0x0 0x12000000 0 0x0800000>,
<0x81000000 0 0x12800000 0x0 0x12800000 0 0x0800000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc0 0>,
<0 0 0 2 &pcie_intc0 1>,
<0 0 0 3 &pcie_intc0 2>,
<0 0 0 4 &pcie_intc0 3>;
pcie_intc0: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
nor_flash: spi@11234000 {
compatible = "mediatek,mt8192-nor";
reg = <0 0x11234000 0 0xe0>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment