x86, realmode: Replace open-coded ljmpw with a macro

We cannot code an ljmpw to the real-mode segment directly, because gas
refuses to assemble an ljmp with a symbolic segment.  Instead of
open-coding it everywhere, define a macro and use it for this case.

This is specifically an ljmpw from a 16-bit segment.  This is okay, as
one should never enter real mode from a 32-bit segment: if one do, the
CPU ends up in a bizarre (and useless) mode sometimes called "unreal
mode" where segments behave like real mode but the default address and
operand sizes is 32 bits.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-15-git-send-email-jarkko.sakkinen@intel.com

arch/x86/realmode/rm/realmode.h

+#ifndef ARCH_X86_REALMODE_RM_REALMODE_H
+#define ARCH_X86_REALMODE_RM_REALMODE_H
+
+#ifdef __ASSEMBLY__
+
+/*
+ * 16-bit ljmpw to the real_mode_seg
+ *
+ * This must be open-coded since gas will choke on using a
+ * relocatable symbol for the segment portion.
+ */
+#define LJMPW_RM(to)	.byte 0xea ; .word (to), real_mode_seg
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* ARCH_X86_REALMODE_RM_REALMODE_H */

arch/x86/realmode/rm/reboot_32.S

@@ -2,6 +2,7 @@
 #include <linux/init.h>
 #include <asm/segment.h>
 #include <asm/page_types.h>
+#include "realmode.h"
 
 /*
  * The following code and data reboots the machine by switching to real
@@ -82,10 +83,7 @@ machine_real_restart_asm16:
 2:
 	andb	$0x10, %dl
 	movl	%edx, %cr0
-	.byte	0xea			/* ljmpw */
-	.word	3f			/* Offset */
-	.word	real_mode_seg		/* Segment */
-
+	LJMPW_RM(3f)
 3:
 	testb	$0, %al
 	jz	bios

arch/x86/realmode/rm/trampoline_32.S

@@ -29,6 +29,7 @@
 #include <linux/init.h>
 #include <asm/segment.h>
 #include <asm/page_types.h>
+#include "realmode.h"
 
 	.text
 	.code16
@@ -38,9 +39,7 @@
 trampoline_data:
 	wbinvd			# Needed for NUMA-Q should be harmless for others
 
-	.byte	0xea		# ljmpw
-	.word	1f		# Offset
-	.word	real_mode_seg	# Segment
+	LJMPW_RM(1f)
 1:
 	mov	%cs, %ax	# Code and data in the same place
 	mov	%ax, %ds

arch/x86/realmode/rm/trampoline_64.S

@@ -31,6 +31,7 @@
 #include <asm/msr.h>
 #include <asm/segment.h>
 #include <asm/processor-flags.h>
+#include "realmode.h"
 
 	.text
 	.balign PAGE_SIZE
@@ -40,9 +41,7 @@ ENTRY(trampoline_data)
 	cli			# We should be safe anyway
 	wbinvd
 
-	.byte	0xea		# ljmpw
-	.word	1f		# Offset
-	.word	real_mode_seg	# Segment
+	LJMPW_RM(1f)
 1:
 	mov	%cs, %ax	# Code and data in the same place
 	mov	%ax, %ds

arch/x86/realmode/rm/wakeup/wakeup_asm.S

@@ -6,6 +6,7 @@
 #include <asm/page_types.h>
 #include <asm/pgtable_types.h>
 #include <asm/processor-flags.h>
+#include "../realmode.h"
 #include "wakeup.h"
 
 		.code16
@@ -36,9 +37,7 @@ wakeup_start:
 	cli
 	cld
 
-	.byte	0xea		/* ljmpw */
-	.word	3f
-	.word	real_mode_seg
+	LJMPW_RM(3f)
 3:
 	/* Apparently some dimwit BIOS programmers don't know how to
 	   program a PM to RM transition, and we might end up here with
@@ -59,9 +58,7 @@ wakeup_start:
 
 	andb	$~X86_CR0_PE, %al
 	movl	%eax, %cr0
-	.byte	0xea		/* ljmpw */
-	.word	3f
-	.word	real_mode_seg
+	LJMPW_RM(3f)
 3:
 	/* Set up segments */
 	movw	%cs, %ax