Commit e60a8fe1 authored by Tony Lindgren's avatar Tony Lindgren

Merge tag 'for-v4.1-rc/omap-fixes-a' of...

Merge tag 'for-v4.1-rc/omap-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v4.1/fixes

ARM: OMAP2+: first set of hwmod fixes for v4.1-rc

Fix a few AM43xx problems: add the VPFE hwmod data, which removes some
warnings; and fix the IP block hardreset implementation.

Basic build, boot, and PM test results are here:

http://www.pwsan.com/omap/testlogs/omap-hwmod-a-for-v4.1-rc/20150508130543/

Note that I do not have an AM43xx board in the testbed, and thus
cannot test on that platform.
parents b0897972 a5bf00cd
......@@ -171,6 +171,12 @@
*/
#define LINKS_PER_OCP_IF 2
/*
* Address offset (in bytes) between the reset control and the reset
* status registers: 4 bytes on OMAP4
*/
#define OMAP4_RST_CTRL_ST_OFFSET 4
/**
* struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations
* @enable_module: function to enable a module (via MODULEMODE)
......@@ -3016,10 +3022,12 @@ static int _omap4_deassert_hardreset(struct omap_hwmod *oh,
if (ohri->st_shift)
pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
oh->name, ohri->name);
return omap_prm_deassert_hardreset(ohri->rst_shift, 0,
return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->rst_shift,
oh->clkdm->pwrdm.ptr->prcm_partition,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs, 0);
oh->prcm.omap4.rstctrl_offs,
oh->prcm.omap4.rstctrl_offs +
OMAP4_RST_CTRL_ST_OFFSET);
}
/**
......@@ -3047,27 +3055,6 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
oh->prcm.omap4.rstctrl_offs);
}
/**
* _am33xx_assert_hardreset - call AM33XX PRM hardreset fn with hwmod args
* @oh: struct omap_hwmod * to assert hardreset
* @ohri: hardreset line data
*
* Call am33xx_prminst_assert_hardreset() with parameters extracted
* from the hwmod @oh and the hardreset line data @ohri. Only
* intended for use as an soc_ops function pointer. Passes along the
* return value from am33xx_prminst_assert_hardreset(). XXX This
* function is scheduled for removal when the PRM code is moved into
* drivers/.
*/
static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
return omap_prm_assert_hardreset(ohri->rst_shift, 0,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs);
}
/**
* _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
* @oh: struct omap_hwmod * to deassert hardreset
......@@ -3083,32 +3070,13 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0,
return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift,
oh->clkdm->pwrdm.ptr->prcm_partition,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs,
oh->prcm.omap4.rstst_offs);
}
/**
* _am33xx_is_hardreset_asserted - call AM33XX PRM hardreset fn with hwmod args
* @oh: struct omap_hwmod * to test hardreset
* @ohri: hardreset line data
*
* Call am33xx_prminst_is_hardreset_asserted() with parameters
* extracted from the hwmod @oh and the hardreset line data @ohri.
* Only intended for use as an soc_ops function pointer. Passes along
* the return value from am33xx_prminst_is_hardreset_asserted(). XXX
* This function is scheduled for removal when the PRM code is moved
* into drivers/.
*/
static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
return omap_prm_is_hardreset_asserted(ohri->rst_shift, 0,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs);
}
/* Public functions */
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
......@@ -3908,21 +3876,13 @@ void __init omap_hwmod_init(void)
soc_ops.init_clkdm = _init_clkdm;
soc_ops.update_context_lost = _omap4_update_context_lost;
soc_ops.get_context_lost = _omap4_get_context_lost;
} else if (soc_is_am43xx()) {
} else if (cpu_is_ti816x() || soc_is_am33xx() || soc_is_am43xx()) {
soc_ops.enable_module = _omap4_enable_module;
soc_ops.disable_module = _omap4_disable_module;
soc_ops.wait_target_ready = _omap4_wait_target_ready;
soc_ops.assert_hardreset = _omap4_assert_hardreset;
soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
soc_ops.init_clkdm = _init_clkdm;
} else if (cpu_is_ti816x() || soc_is_am33xx()) {
soc_ops.enable_module = _omap4_enable_module;
soc_ops.disable_module = _omap4_disable_module;
soc_ops.wait_target_ready = _omap4_wait_target_ready;
soc_ops.assert_hardreset = _am33xx_assert_hardreset;
soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
soc_ops.init_clkdm = _init_clkdm;
} else {
WARN(1, "omap_hwmod: unknown SoC type\n");
......
......@@ -544,6 +544,44 @@ static struct omap_hwmod am43xx_hdq1w_hwmod = {
},
};
static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x104,
.sysc_flags = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
.sysc_fields = &omap_hwmod_sysc_type2,
};
static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
.name = "vpfe",
.sysc = &am43xx_vpfe_sysc,
};
static struct omap_hwmod am43xx_vpfe0_hwmod = {
.name = "vpfe0",
.class = &am43xx_vpfe_hwmod_class,
.clkdm_name = "l3s_clkdm",
.prcm = {
.omap4 = {
.modulemode = MODULEMODE_SWCTRL,
.clkctrl_offs = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
},
},
};
static struct omap_hwmod am43xx_vpfe1_hwmod = {
.name = "vpfe1",
.class = &am43xx_vpfe_hwmod_class,
.clkdm_name = "l3s_clkdm",
.prcm = {
.omap4 = {
.modulemode = MODULEMODE_SWCTRL,
.clkctrl_offs = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
},
},
};
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
......@@ -825,6 +863,34 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__hdq1w = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
.master = &am43xx_vpfe0_hwmod,
.slave = &am33xx_l3_main_hwmod,
.clk = "l3_gclk",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
.master = &am43xx_vpfe1_hwmod,
.slave = &am33xx_l3_main_hwmod,
.clk = "l3_gclk",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe0 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am43xx_vpfe0_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe1 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am43xx_vpfe1_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
......@@ -925,6 +991,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__dss_dispc,
&am43xx_l4_ls__dss_rfbi,
&am43xx_l4_ls__hdq1w,
&am43xx_l3__vpfe0,
&am43xx_l3__vpfe1,
&am43xx_l4_ls__vpfe0,
&am43xx_l4_ls__vpfe1,
NULL,
};
......
......@@ -144,5 +144,6 @@
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
#define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET 0x04a0
#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068
#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070
#endif
......@@ -87,12 +87,6 @@ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
return v;
}
/*
* Address offset (in bytes) between the reset control and the reset
* status registers: 4 bytes on OMAP4
*/
#define OMAP4_RST_CTRL_ST_OFFSET 4
/**
* omap4_prminst_is_hardreset_asserted - read the HW reset line state of
* submodules contained in the hwmod module
......@@ -141,11 +135,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
* omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
* wait
* @shift: register bit shift corresponding to the reset line to deassert
* @st_shift: status bit offset, not used for OMAP4+
* @st_shift: status bit offset corresponding to the reset line
* @part: PRM partition
* @inst: PRM instance offset
* @rstctrl_offs: reset register offset
* @st_offs: reset status register offset, not used for OMAP4+
* @rstst_offs: reset status register offset
*
* Some IPs like dsp, ipu or iva contain processors that require an HW
* reset line to be asserted / deasserted in order to fully enable the
......@@ -157,11 +151,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
* of reset, or -EBUSY if the submodule did not exit reset promptly.
*/
int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
u16 rstctrl_offs, u16 st_offs)
u16 rstctrl_offs, u16 rstst_offs)
{
int c;
u32 mask = 1 << shift;
u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET;
u32 st_mask = 1 << st_shift;
/* Check the current status to avoid de-asserting the line twice */
if (omap4_prminst_is_hardreset_asserted(shift, part, inst,
......@@ -169,13 +163,13 @@ int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
return -EEXIST;
/* Clear the reset status by writing 1 to the status bit */
omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst,
omap4_prminst_rmw_inst_reg_bits(0xffffffff, st_mask, part, inst,
rstst_offs);
/* de-assert the reset control line */
omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs);
/* wait the status to be set */
omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst,
rstst_offs),
omap_test_timeout(omap4_prminst_is_hardreset_asserted(st_shift, part,
inst, rstst_offs),
MAX_MODULE_HARDRESET_WAIT, c);
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment