Commit e64e8498 authored by Hans de Goede's avatar Hans de Goede Committed by Rafael J. Wysocki

platform/x86: Add ACPI i2c-multi-instantiate pseudo driver

On systems with ACPI instantiated i2c-clients, normally there is 1 fw_node
per i2c-device and that fw-node contains 1 I2cSerialBus resource for that 1
i2c-device.

But in some rare cases the manufacturer has decided to describe multiple
i2c-devices in a single ACPI fwnode with multiple I2cSerialBus resources.

An earlier attempt to fix this in the i2c-core resulted in a lot of extra
code to support this corner-case.

This commit introduces a new i2c-multi-instantiate driver which fixes this
in a different way. This new driver can be built as a module which will
only loaded on affected systems.

This driver will instantiate a new i2c-client per I2cSerialBus resource,
using the driver_data from the acpi_device_id it is binding to to tell it
which chip-type (and optional irq-resource) to use when instantiating.

Note this driver depends on a platform device being instantiated for the
ACPI fwnode, see the i2c_multi_instantiate_ids list of ACPI device-ids in
drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
Acked-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: default avatarWolfram Sang <wsa@the-dreams.de>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent 21ba074c
......@@ -367,6 +367,12 @@ L: linux-acpi@vger.kernel.org
S: Maintained
F: drivers/acpi/arm64
ACPI I2C MULTI INSTANTIATE DRIVER
M: Hans de Goede <hdegoede@redhat.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/i2c-multi-instantiate.c
ACPI PMIC DRIVERS
M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
M: Len Brown <lenb@kernel.org>
......
......@@ -1218,6 +1218,17 @@ config INTEL_CHTDC_TI_PWRBTN
To compile this driver as a module, choose M here: the module
will be called intel_chtdc_ti_pwrbtn.
config I2C_MULTI_INSTANTIATE
tristate "I2C multi instantiate pseudo device driver"
depends on I2C && ACPI
help
Some ACPI-based systems list multiple i2c-devices in a single ACPI
firmware-node. This driver will instantiate separate i2c-clients
for each device in the firmware-node.
To compile this driver as a module, choose M here: the module
will be called i2c-multi-instantiate.
endif # X86_PLATFORM_DEVICES
config PMC_ATOM
......
......@@ -91,3 +91,4 @@ obj-$(CONFIG_PMC_ATOM) += pmc_atom.o
obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o
obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o
obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o
obj-$(CONFIG_I2C_MULTI_INSTANTIATE) += i2c-multi-instantiate.o
// SPDX-License-Identifier: GPL-2.0+
/*
* I2C multi-instantiate driver, pseudo driver to instantiate multiple
* i2c-clients from a single fwnode.
*
* Copyright 2018 Hans de Goede <hdegoede@redhat.com>
*/
#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
struct i2c_inst_data {
const char *type;
int gpio_irq_idx;
};
struct i2c_multi_inst_data {
int num_clients;
struct i2c_client *clients[0];
};
static int i2c_multi_inst_probe(struct platform_device *pdev)
{
struct i2c_multi_inst_data *multi;
const struct acpi_device_id *match;
const struct i2c_inst_data *inst_data;
struct i2c_board_info board_info = {};
struct device *dev = &pdev->dev;
struct acpi_device *adev;
char name[32];
int i, ret;
match = acpi_match_device(dev->driver->acpi_match_table, dev);
if (!match) {
dev_err(dev, "Error ACPI match data is missing\n");
return -ENODEV;
}
inst_data = (const struct i2c_inst_data *)match->driver_data;
adev = ACPI_COMPANION(dev);
/* Count number of clients to instantiate */
for (i = 0; inst_data[i].type; i++) {}
multi = devm_kmalloc(dev,
offsetof(struct i2c_multi_inst_data, clients[i]),
GFP_KERNEL);
if (!multi)
return -ENOMEM;
multi->num_clients = i;
for (i = 0; i < multi->num_clients; i++) {
memset(&board_info, 0, sizeof(board_info));
strlcpy(board_info.type, inst_data[i].type, I2C_NAME_SIZE);
snprintf(name, sizeof(name), "%s-%s", match->id,
inst_data[i].type);
board_info.dev_name = name;
board_info.irq = 0;
if (inst_data[i].gpio_irq_idx != -1) {
ret = acpi_dev_gpio_irq_get(adev,
inst_data[i].gpio_irq_idx);
if (ret < 0) {
dev_err(dev, "Error requesting irq at index %d: %d\n",
inst_data[i].gpio_irq_idx, ret);
goto error;
}
board_info.irq = ret;
}
multi->clients[i] = i2c_acpi_new_device(dev, i, &board_info);
if (!multi->clients[i]) {
dev_err(dev, "Error creating i2c-client, idx %d\n", i);
ret = -ENODEV;
goto error;
}
}
platform_set_drvdata(pdev, multi);
return 0;
error:
while (--i >= 0)
i2c_unregister_device(multi->clients[i]);
return ret;
}
static int i2c_multi_inst_remove(struct platform_device *pdev)
{
struct i2c_multi_inst_data *multi = platform_get_drvdata(pdev);
int i;
for (i = 0; i < multi->num_clients; i++)
i2c_unregister_device(multi->clients[i]);
return 0;
}
static const struct i2c_inst_data bsg1160_data[] = {
{ "bmc150_accel", 0 },
{ "bmc150_magn", -1 },
{ "bmg160", -1 },
{}
};
/*
* Note new device-ids must also be added to i2c_multi_instantiate_ids in
* drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
*/
static const struct acpi_device_id i2c_multi_inst_acpi_ids[] = {
{ "BSG1160", (unsigned long)bsg1160_data },
{ }
};
MODULE_DEVICE_TABLE(acpi, i2c_multi_inst_acpi_ids);
static struct platform_driver i2c_multi_inst_driver = {
.driver = {
.name = "I2C multi instantiate pseudo device driver",
.acpi_match_table = ACPI_PTR(i2c_multi_inst_acpi_ids),
},
.probe = i2c_multi_inst_probe,
.remove = i2c_multi_inst_remove,
};
module_platform_driver(i2c_multi_inst_driver);
MODULE_DESCRIPTION("I2C multi instantiate pseudo device driver");
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment