irqchip/gic-v4.1: Add VPE eviction callback

When descheduling a VPE, special care must be taken to tell the GIC
about whether we want to receive a doorbell or not. This is a
major improvement on GICv4.0, where the doorbell had to be separately
enabled/disabled.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20191224111055.11836-13-maz@kernel.org

drivers/irqchip/irq-gic-v3-its.c

@@ -2630,7 +2630,7 @@ static int __init allocate_lpi_tables(void)
 	return 0;
 }
 
-static u64 its_clear_vpend_valid(void __iomem *vlpi_base)
+static u64 its_clear_vpend_valid(void __iomem *vlpi_base, u64 clr, u64 set)
 {
 	u32 count = 1000000;	/* 1s! */
 	bool clean;
@@ -2638,6 +2638,8 @@ static u64 its_clear_vpend_valid(void __iomem *vlpi_base)
 
 	val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
 	val &= ~GICR_VPENDBASER_Valid;
+	val &= ~clr;
+	val |= set;
 	gits_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
 
 	do {
@@ -2650,6 +2652,11 @@ static u64 its_clear_vpend_valid(void __iomem *vlpi_base)
 		}
 	} while (!clean && count);
 
+	if (unlikely(val & GICR_VPENDBASER_Dirty)) {
+		pr_err_ratelimited("ITS virtual pending table not cleaning\n");
+		val |= GICR_VPENDBASER_PendingLast;
+	}
+
 	return val;
 }
 
@@ -2758,7 +2765,7 @@ static void its_cpu_init_lpis(void)
 		 * ancient programming gets left in and has possibility of
 		 * corrupting memory.
 		 */
-		val = its_clear_vpend_valid(vlpi_base);
+		val = its_clear_vpend_valid(vlpi_base, 0, 0);
 		WARN_ON(val & GICR_VPENDBASER_Dirty);
 	}
 
@@ -3438,16 +3445,10 @@ static void its_vpe_deschedule(struct its_vpe *vpe)
 	void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
 	u64 val;
 
-	val = its_clear_vpend_valid(vlpi_base);
+	val = its_clear_vpend_valid(vlpi_base, 0, 0);
 
-	if (unlikely(val & GICR_VPENDBASER_Dirty)) {
-		pr_err_ratelimited("ITS virtual pending table not cleaning\n");
-		vpe->idai = false;
-		vpe->pending_last = true;
-	} else {
-		vpe->idai = !!(val & GICR_VPENDBASER_IDAI);
-		vpe->pending_last = !!(val & GICR_VPENDBASER_PendingLast);
-	}
+	vpe->idai = !!(val & GICR_VPENDBASER_IDAI);
+	vpe->pending_last = !!(val & GICR_VPENDBASER_PendingLast);
 }
 
 static void its_vpe_invall(struct its_vpe *vpe)
@@ -3639,6 +3640,35 @@ static void its_vpe_4_1_schedule(struct its_vpe *vpe,
 	gits_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
 }
 
+static void its_vpe_4_1_deschedule(struct its_vpe *vpe,
+				   struct its_cmd_info *info)
+{
+	void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
+	u64 val;
+
+	if (info->req_db) {
+		/*
+		 * vPE is going to block: make the vPE non-resident with
+		 * PendingLast clear and DB set. The GIC guarantees that if
+		 * we read-back PendingLast clear, then a doorbell will be
+		 * delivered when an interrupt comes.
+		 */
+		val = its_clear_vpend_valid(vlpi_base,
+					    GICR_VPENDBASER_PendingLast,
+					    GICR_VPENDBASER_4_1_DB);
+		vpe->pending_last = !!(val & GICR_VPENDBASER_PendingLast);
+	} else {
+		/*
+		 * We're not blocking, so just make the vPE non-resident
+		 * with PendingLast set, indicating that we'll be back.
+		 */
+		val = its_clear_vpend_valid(vlpi_base,
+					    0,
+					    GICR_VPENDBASER_PendingLast);
+		vpe->pending_last = true;
+	}
+}
+
 static int its_vpe_4_1_set_vcpu_affinity(struct irq_data *d, void *vcpu_info)
 {
 	struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
@@ -3650,6 +3680,7 @@ static int its_vpe_4_1_set_vcpu_affinity(struct irq_data *d, void *vcpu_info)
 		return 0;
 
 	case DESCHEDULE_VPE:
+		its_vpe_4_1_deschedule(vpe, info);
 		return 0;
 
 	case INVALL_VPE: