Commit e68ef121 authored by Ravi Bangoria's avatar Ravi Bangoria Committed by Michael Ellerman

powerpc/watchpoint: Use builtin ALIGN*() macros

Currently we calculate hw aligned start and end addresses manually.
Replace them with builtin ALIGN_DOWN() and ALIGN() macros.

So far end_addr was inclusive but this patch makes it exclusive (by
avoiding -1) for better readability.
Suggested-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarRavi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: default avatarMichael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-13-ravi.bangoria@linux.ibm.com
parent c9e82aeb
......@@ -34,10 +34,11 @@ struct arch_hw_breakpoint {
#define HW_BRK_TYPE_PRIV_ALL (HW_BRK_TYPE_USER | HW_BRK_TYPE_KERNEL | \
HW_BRK_TYPE_HYP)
/* Minimum granularity */
#ifdef CONFIG_PPC_8xx
#define HW_BREAKPOINT_ALIGN 0x3
#define HW_BREAKPOINT_SIZE 0x4
#else
#define HW_BREAKPOINT_ALIGN 0x7
#define HW_BREAKPOINT_SIZE 0x8
#endif
#define DABR_MAX_LEN 8
......
......@@ -146,10 +146,10 @@ int arch_bp_generic_fields(int type, int *gen_bp_type)
* <---8 bytes--->
*
* In this case, we should configure hw as:
* start_addr = address & ~HW_BREAKPOINT_ALIGN
* start_addr = address & ~(HW_BREAKPOINT_SIZE - 1)
* len = 16 bytes
*
* @start_addr and @end_addr are inclusive.
* @start_addr is inclusive but @end_addr is exclusive.
*/
static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
{
......@@ -157,14 +157,14 @@ static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
u16 hw_len;
unsigned long start_addr, end_addr;
start_addr = hw->address & ~HW_BREAKPOINT_ALIGN;
end_addr = (hw->address + hw->len - 1) | HW_BREAKPOINT_ALIGN;
hw_len = end_addr - start_addr + 1;
start_addr = ALIGN_DOWN(hw->address, HW_BREAKPOINT_SIZE);
end_addr = ALIGN(hw->address + hw->len, HW_BREAKPOINT_SIZE);
hw_len = end_addr - start_addr;
if (dawr_enabled()) {
max_len = DAWR_MAX_LEN;
/* DAWR region can't cross 512 bytes boundary */
if ((start_addr >> 9) != (end_addr >> 9))
if (ALIGN(start_addr, SZ_512M) != ALIGN(end_addr - 1, SZ_512M))
return -EINVAL;
} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
/* 8xx can setup a range without limitation */
......
......@@ -800,12 +800,12 @@ static inline int set_breakpoint_8xx(struct arch_hw_breakpoint *brk)
unsigned long lctrl1 = LCTRL1_CTE_GT | LCTRL1_CTF_LT | LCTRL1_CRWE_RW |
LCTRL1_CRWF_RW;
unsigned long lctrl2 = LCTRL2_LW0EN | LCTRL2_LW0LADC | LCTRL2_SLW0EN;
unsigned long start_addr = brk->address & ~HW_BREAKPOINT_ALIGN;
unsigned long end_addr = (brk->address + brk->len - 1) | HW_BREAKPOINT_ALIGN;
unsigned long start_addr = ALIGN_DOWN(brk->address, HW_BREAKPOINT_SIZE);
unsigned long end_addr = ALIGN(brk->address + brk->len, HW_BREAKPOINT_SIZE);
if (start_addr == 0)
lctrl2 |= LCTRL2_LW0LA_F;
else if (end_addr == ~0U)
else if (end_addr == 0)
lctrl2 |= LCTRL2_LW0LA_E;
else
lctrl2 |= LCTRL2_LW0LA_EandF;
......@@ -821,7 +821,7 @@ static inline int set_breakpoint_8xx(struct arch_hw_breakpoint *brk)
lctrl1 |= LCTRL1_CRWE_WO | LCTRL1_CRWF_WO;
mtspr(SPRN_CMPE, start_addr - 1);
mtspr(SPRN_CMPF, end_addr + 1);
mtspr(SPRN_CMPF, end_addr);
mtspr(SPRN_LCTRL1, lctrl1);
mtspr(SPRN_LCTRL2, lctrl2);
......
......@@ -216,7 +216,7 @@ long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_inf
if ((unsigned long)bp_info->addr >= TASK_SIZE)
return -EIO;
brk.address = bp_info->addr & ~HW_BREAKPOINT_ALIGN;
brk.address = ALIGN_DOWN(bp_info->addr, HW_BREAKPOINT_SIZE);
brk.type = HW_BRK_TYPE_TRANSLATE;
brk.len = DABR_MAX_LEN;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment