Commit e6e4d05d authored by Joe Perches's avatar Joe Perches Committed by Greg Kroah-Hartman

Staging: cxt1e1: fix cxt1e1 module names

On Mon, 2010-05-03 at 10:09 -0700, Randy Dunlap wrote:
> Lots of cxt1e1 source code uses THIS_MODULE->name, which won't build
> when CONFIG_MODULES is not enabled, so use KBUILD_MODNAME instead.

Perhaps a conversion to pr_<level> is better?
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Acked-by: default avatarRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 3b9fdcd5
......@@ -11,6 +11,8 @@
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/byteorder.h>
......@@ -117,7 +119,7 @@ watchdog_func (unsigned long arg)
if (drvr_state != SBE_DRVR_AVAILABLE)
{
if (log_level >= LOG_MONITOR)
printk (KERN_WARNING "watchdog_func: drvr not available (%x)\n", drvr_state);
pr_warning("%s: drvr not available (%x)\n", __func__, drvr_state);
return;
}
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
......
......@@ -12,6 +12,8 @@
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/netdevice.h>
#include <linux/hdlc.h>
#include <linux/if_arp.h>
......@@ -230,7 +232,7 @@ c4_hdw_init (struct pci_dev * pdev, int found)
/* our MUSYCC chip supports two functions, 0 & 1 */
if ((fun = PCI_FUNC (pdev->devfn)) > 1)
{
printk (KERN_WARNING "%s: unexpected devfun: 0x%x\n", THIS_MODULE->name, pdev->devfn);
pr_warning("unexpected devfun: 0x%x\n", pdev->devfn);
return 0;
}
if (pdev->bus) /* obtain bus number */
......@@ -259,8 +261,7 @@ c4_hdw_init (struct pci_dev * pdev, int found)
if (i == MAX_BOARDS) /* no match in above loop means MAX
* exceeded */
{
printk (KERN_WARNING "%s: exceeded number of allowed devices (>%d)?\n",
THIS_MODULE->name, MAX_BOARDS);
pr_warning("exceeded number of allowed devices (>%d)?\n", MAX_BOARDS);
return 0;
}
if (pdev->bus)
......@@ -319,7 +320,7 @@ c4hw_attach_all (void)
}
if (!found)
{
printk (KERN_WARNING "%s: No boards found.\n", THIS_MODULE->name);
pr_warning("No boards found\n");
return ENODEV;
}
/* sanity check for consistant hardware found */
......@@ -327,7 +328,8 @@ c4hw_attach_all (void)
{
if (hi->pci_slot != 0xff && (!hi->addr[0] || !hi->addr[1]))
{
printk (KERN_WARNING "%s: something very wrong with pci_get_device.\n", hi->devname);
pr_warning("%s: something very wrong with pci_get_device\n",
hi->devname);
return EIO;
}
}
......@@ -340,22 +342,22 @@ c4hw_attach_all (void)
{
if (request_mem_region (hi->addr[j], hi->len[j], hi->devname) == 0)
{
printk (KERN_WARNING "%s: memory in use, addr=0x%lx, len=0x%lx ?\n",
hi->devname, hi->addr[j], hi->len[j]);
pr_warning("%s: memory in use, addr=0x%lx, len=0x%lx ?\n",
hi->devname, hi->addr[j], hi->len[j]);
cleanup_ioremap ();
return ENOMEM;
}
hi->addr_mapped[j] = (unsigned long) ioremap (hi->addr[j], hi->len[j]);
if (!hi->addr_mapped[j])
{
printk (KERN_WARNING "%s: ioremap fails, addr=0x%lx, len=0x%lx ?\n",
hi->devname, hi->addr[j], hi->len[j]);
pr_warning("%s: ioremap fails, addr=0x%lx, len=0x%lx ?\n",
hi->devname, hi->addr[j], hi->len[j]);
cleanup_ioremap ();
return ENOMEM;
}
#ifdef SBE_MAP_DEBUG
printk (KERN_WARNING "%s: io remapped from phys %x to virt %x\n",
hi->devname, (u_int32_t) hi->addr[j], (u_int32_t) hi->addr_mapped[j]);
pr_warning("%s: io remapped from phys %x to virt %x\n",
hi->devname, (u_int32_t) hi->addr[j], (u_int32_t) hi->addr_mapped[j]);
#endif
}
}
......@@ -371,8 +373,8 @@ c4hw_attach_all (void)
pci_enable_device (hi->pdev[1]))
{
drvr_state = SBE_DRVR_DOWN;
printk (KERN_WARNING "%s: failed to enable card %d slot %d\n",
hi->devname, i, hi->pci_slot);
pr_warning("%s: failed to enable card %d slot %d\n",
hi->devname, i, hi->pci_slot);
cleanup_devs ();
cleanup_ioremap ();
return EIO;
......
......@@ -12,6 +12,8 @@
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/hdlc.h>
......@@ -563,13 +565,13 @@ create_chan (struct net_device * ndev, ci_t * ci,
priv = OS_kmalloc (sizeof (struct c4_priv));
if (!priv)
{
printk (KERN_WARNING "%s: no memory for net_device !\n", ci->devname);
pr_warning("%s: no memory for net_device !\n", ci->devname);
return 0;
}
dev = alloc_hdlcdev (priv);
if (!dev)
{
printk (KERN_WARNING "%s: no memory for hdlc_device !\n", ci->devname);
pr_warning("%s: no memory for hdlc_device !\n", ci->devname);
OS_kfree (priv);
return 0;
}
......@@ -1111,7 +1113,7 @@ c4_add_dev (hdw_info_t * hi, int brdno, unsigned long f0, unsigned long f1,
ndev = alloc_netdev(sizeof(ci_t), SBE_IFACETMPL, c4_setup);
if (!ndev)
{
printk (KERN_WARNING "%s: no memory for struct net_device !\n", hi->devname);
pr_warning("%s: no memory for struct net_device !\n", hi->devname);
error_flag = ENOMEM;
return 0;
}
......@@ -1177,8 +1179,7 @@ c4_add_dev (hdw_info_t * hi, int brdno, unsigned long f0, unsigned long f1,
#endif
ndev->name, ndev))
{
printk (KERN_WARNING "%s: MUSYCC could not get irq: %d\n",
ndev->name, irq0);
pr_warning("%s: MUSYCC could not get irq: %d\n", ndev->name, irq0);
unregister_netdev (ndev);
OS_kfree (netdev_priv(ndev));
OS_kfree (ndev);
......@@ -1188,8 +1189,7 @@ c4_add_dev (hdw_info_t * hi, int brdno, unsigned long f0, unsigned long f1,
#ifdef CONFIG_SBE_PMCC4_NCOMM
if (request_irq (irq1, &c4_ebus_interrupt, IRQF_SHARED, ndev->name, ndev))
{
printk (KERN_WARNING "%s: EBUS could not get irq: %d\n",
hi->devname, irq1);
pr_warning("%s: EBUS could not get irq: %d\n", hi->devname, irq1);
unregister_netdev (ndev);
free_irq (irq0, ndev);
OS_kfree (netdev_priv(ndev));
......@@ -1263,33 +1263,33 @@ c4_mod_init (void)
{
int rtn;
printk (KERN_WARNING "%s: %s\n", THIS_MODULE->name, pmcc4_OSSI_release);
pr_warning("%s\n", pmcc4_OSSI_release);
if ((rtn = c4hw_attach_all ()))
return -rtn; /* installation failure - see system log */
/* housekeeping notifications */
if (log_level != log_level_default)
printk (KERN_INFO "%s NOTE: driver parameter <log_level> changed from default %d to %d.\n",
THIS_MODULE->name, log_level_default, log_level);
pr_info("NOTE: driver parameter <log_level> changed from default %d to %d.\n",
log_level_default, log_level);
if (max_mru != max_mru_default)
printk (KERN_INFO "%s NOTE: driver parameter <max_mru> changed from default %d to %d.\n",
THIS_MODULE->name, max_mru_default, max_mru);
pr_info("NOTE: driver parameter <max_mru> changed from default %d to %d.\n",
max_mru_default, max_mru);
if (max_mtu != max_mtu_default)
printk (KERN_INFO "%s NOTE: driver parameter <max_mtu> changed from default %d to %d.\n",
THIS_MODULE->name, max_mtu_default, max_mtu);
pr_info("NOTE: driver parameter <max_mtu> changed from default %d to %d.\n",
max_mtu_default, max_mtu);
if (max_rxdesc_used != max_rxdesc_default)
{
if (max_rxdesc_used > 2000)
max_rxdesc_used = 2000; /* out-of-bounds reset */
printk (KERN_INFO "%s NOTE: driver parameter <max_rxdesc_used> changed from default %d to %d.\n",
THIS_MODULE->name, max_rxdesc_default, max_rxdesc_used);
pr_info("NOTE: driver parameter <max_rxdesc_used> changed from default %d to %d.\n",
max_rxdesc_default, max_rxdesc_used);
}
if (max_txdesc_used != max_txdesc_default)
{
if (max_txdesc_used > 1000)
max_txdesc_used = 1000; /* out-of-bounds reset */
printk (KERN_INFO "%s NOTE: driver parameter <max_txdesc_used> changed from default %d to %d.\n",
THIS_MODULE->name, max_txdesc_default, max_txdesc_used);
pr_info("NOTE: driver parameter <max_txdesc_used> changed from default %d to %d.\n",
max_txdesc_default, max_txdesc_used);
}
return 0; /* installation success */
}
......@@ -1331,7 +1331,7 @@ c4_mod_remove (void)
cleanup_devs ();
c4_cleanup ();
cleanup_ioremap ();
printk (KERN_INFO "SBE %s - driver removed.\n", THIS_MODULE->name);
pr_info("SBE - driver removed.\n");
}
module_init (c4_mod_init);
......
......@@ -71,6 +71,7 @@ unsigned int max_bh = 0;
char SBEid_pmcc4_musyccc[] =
"@(#)musycc.c - $Revision: 2.1 $ (c) Copyright 2004-2006 SBE, Inc.";
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include "pmcc4_sysdep.h"
......@@ -681,8 +682,8 @@ musycc_serv_req (mpi_t * pi, u_int32_t req)
}
if (rcnt > MUSYCC_SR_RETRY_CNT)
{
printk (KERN_WARNING "%s: failed service request (#%d)= %x, group %d.\n",
pi->up->devname, MUSYCC_SR_RETRY_CNT, req, pi->portnum);
pr_warning("%s: failed service request (#%d)= %x, group %d.\n",
pi->up->devname, MUSYCC_SR_RETRY_CNT, req, pi->portnum);
SD_SEM_GIVE (&pi->sr_sem_busy); /* allow any next request */
return;
}
......@@ -959,14 +960,14 @@ musycc_init (ci_t * ci)
if (max_mru > 0xffe)
{
printk (KERN_WARNING "%s: Maximum allowed MRU exceeded, resetting %d to %d.\n",
THIS_MODULE->name, max_mru, 0xffe);
pr_warning("Maximum allowed MRU exceeded, resetting %d to %d.\n",
max_mru, 0xffe);
max_mru = 0xffe;
}
if (max_mtu > 0xffe)
{
printk (KERN_WARNING "%s: Maximum allowed MTU exceeded, resetting %d to %d.\n",
THIS_MODULE->name, max_mtu, 0xffe);
pr_warning("Maximum allowed MTU exceeded, resetting %d to %d.\n",
max_mtu, 0xffe);
max_mtu = 0xffe;
}
#ifdef SBE_WAN256T3_ENABLE
......
......@@ -83,6 +83,7 @@
char OSSIid_pmcc4_drvc[] =
"@(#)pmcc4_drv.c - $Revision: 3.1 $ (c) Copyright 2002-2007 One Stop Systems, Inc.";
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#if defined (__FreeBSD__) || defined (__NetBSD__)
#include <sys/param.h>
......@@ -207,8 +208,8 @@ c4_new (void *hi)
ci_t *ci;
#ifdef SBE_MAP_DEBUG
printk (KERN_WARNING "%s: c4_new() entered, ci needs %u.\n",
THIS_MODULE->name, (unsigned int) sizeof (ci_t));
pr_warning("c4_new() entered, ci needs %u.\n",
(unsigned int) sizeof (ci_t));
#endif
ci = (ci_t *) OS_kmalloc (sizeof (ci_t));
......@@ -220,8 +221,8 @@ c4_new (void *hi)
c4_list = ci;
ci->brdno = ci->next ? ci->next->brdno + 1 : 0;
} else
printk (KERN_WARNING "%s: failed CI malloc, size %u.\n",
THIS_MODULE->name, (unsigned int) sizeof (ci_t));
pr_warning("failed CI malloc, size %u.\n",
(unsigned int) sizeof (ci_t));
if (CI == 0)
CI = ci; /* DEBUG, only board 0 usage */
......@@ -805,7 +806,8 @@ c4_init (ci_t * ci, u_char *func0, u_char *func1)
break;
default:
ci->max_port = 0;
printk (KERN_WARNING "%s: illegal port configuration (%x)\n", ci->devname, pmsk);
pr_warning("%s: illegal port configuration (%x)\n",
ci->devname, pmsk);
return SBE_DRVR_FAIL;
}
#ifdef SBE_MAP_DEBUG
......@@ -847,8 +849,8 @@ c4_init (ci_t * ci, u_char *func0, u_char *func1)
ch->p.mode_56k = 0; /* default is 64kbps mode */
} else
{
printk (KERN_WARNING "%s: failed mch_t malloc, port %d channel %d size %u.\n",
THIS_MODULE->name, portnum, j, (unsigned int) sizeof (mch_t));
pr_warning("failed mch_t malloc, port %d channel %d size %u.\n",
portnum, j, (unsigned int) sizeof (mch_t));
break;
}
}
......
......@@ -164,7 +164,7 @@ OS_mem_token_alloc (size_t size)
skb = dev_alloc_skb (size);
if (!skb)
{
//printk (KERN_WARNING "no mem in OS_mem_token_alloc !");
//pr_warning("no mem in OS_mem_token_alloc !\n");
return 0;
}
return skb;
......
......@@ -11,6 +11,8 @@
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include <linux/module.h>
#include <linux/errno.h>
......@@ -318,16 +320,14 @@ sbecom_proc_brd_init (ci_t * ci)
ci->dir_dev = proc_mkdir(dir, NULL);
if (!ci->dir_dev)
{
printk (KERN_ERR "%s: Unable to create directory /proc/driver/%s\n",
THIS_MODULE->name, ci->devname);
pr_err("Unable to create directory /proc/driver/%s\n", ci->devname);
goto fail;
}
e = create_proc_read_entry ("info", S_IFREG | S_IRUGO,
ci->dir_dev, sbecom_proc_get_sbe_info, ci);
if (!e)
{
printk (KERN_ERR "%s: Unable to create entry /proc/driver/%s/info\n",
THIS_MODULE->name, ci->devname);
pr_err("Unable to create entry /proc/driver/%s/info\n", ci->devname);
goto fail;
}
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment