qede: Add basic Network driver

The Qlogic Everest Driver for Ethernet is the Ethernet specific module for
QL4xxx ethernet products by Qlogic.

This patch adds a very minimal PCI driver, one that doesn't yet register
a network device, but one that does interact with qed and does a basic
initialization of the HW.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/Kconfig

@@ -97,4 +97,9 @@ config QED
 	---help---
 	  This enables the support for ...
 
+config QEDE
+	tristate "QLogic QED 25/40/100Gb Ethernet NIC"
+	depends on QED
+	---help---
+	  This enables the support for ...
 endif # NET_VENDOR_QLOGIC

drivers/net/ethernet/qlogic/Makefile

@@ -7,3 +7,4 @@ obj-$(CONFIG_QLCNIC) += qlcnic/
 obj-$(CONFIG_QLGE) += qlge/
 obj-$(CONFIG_NETXEN_NIC) += netxen/
 obj-$(CONFIG_QED) += qed/
+obj-$(CONFIG_QEDE)+= qede/

drivers/net/ethernet/qlogic/qede/Makefile

+obj-$(CONFIG_QEDE) := qede.o
+
+qede-y := qede_main.o

drivers/net/ethernet/qlogic/qede/qede.h

+/* QLogic qede NIC Driver
+* Copyright (c) 2015 QLogic Corporation
+*
+* This software is available under the terms of the GNU General Public License
+* (GPL) Version 2, available from the file COPYING in the main directory of
+* this source tree.
+*/
+
+#ifndef _QEDE_H_
+#define _QEDE_H_
+#include <linux/compiler.h>
+#include <linux/version.h>
+#include <linux/workqueue.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/bitmap.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/qed/common_hsi.h>
+#include <linux/qed/eth_common.h>
+#include <linux/qed/qed_if.h>
+#include <linux/qed/qed_chain.h>
+#include <linux/qed/qed_eth_if.h>
+
+#define QEDE_MAJOR_VERSION		8
+#define QEDE_MINOR_VERSION		4
+#define QEDE_REVISION_VERSION		0
+#define QEDE_ENGINEERING_VERSION	0
+#define DRV_MODULE_VERSION __stringify(QEDE_MAJOR_VERSION) "."	\
+		__stringify(QEDE_MINOR_VERSION) "."		\
+		__stringify(QEDE_REVISION_VERSION) "."		\
+		__stringify(QEDE_ENGINEERING_VERSION)
+
+#define QEDE_ETH_INTERFACE_VERSION	300
+
+#define DRV_MODULE_SYM		qede
+
+struct qede_dev {
+	struct qed_dev			*cdev;
+	struct net_device		*ndev;
+	struct pci_dev			*pdev;
+
+	u32				dp_module;
+	u8				dp_level;
+
+	const struct qed_eth_ops	*ops;
+
+	struct qed_dev_eth_info	dev_info;
+#define QEDE_MAX_RSS_CNT(edev)	((edev)->dev_info.num_queues)
+#define QEDE_MAX_TSS_CNT(edev)	((edev)->dev_info.num_queues * \
+				 (edev)->dev_info.num_tc)
+
+	u16				num_rss;
+	u8				num_tc;
+#define QEDE_RSS_CNT(edev)		((edev)->num_rss)
+#define QEDE_TSS_CNT(edev)		((edev)->num_rss *	\
+					 (edev)->num_tc)
+#define QEDE_TSS_IDX(edev, txqidx)	((txqidx) % (edev)->num_rss)
+#define QEDE_TC_IDX(edev, txqidx)	((txqidx) / (edev)->num_rss)
+
+	struct qed_int_info		int_info;
+	unsigned char			primary_mac[ETH_ALEN];
+
+	/* Smaller private varaiant of the RTNL lock */
+	struct mutex			qede_lock;
+	u32				state; /* Protected by qede_lock */
+};
+
+/* Debug print definitions */
+#define DP_NAME(edev) ((edev)->ndev->name)
+
+#endif /* _QEDE_H_ */

drivers/net/ethernet/qlogic/qede/qede_main.c

+/* QLogic qede NIC Driver
+* Copyright (c) 2015 QLogic Corporation
+*
+* This software is available under the terms of the GNU General Public License
+* (GPL) Version 2, available from the file COPYING in the main directory of
+* this source tree.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/version.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <asm/byteorder.h>
+#include <asm/param.h>
+#include <linux/io.h>
+#include <linux/netdev_features.h>
+#include <linux/udp.h>
+#include <linux/tcp.h>
+#include <net/vxlan.h>
+#include <linux/ip.h>
+#include <net/ipv6.h>
+#include <net/tcp.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/pkt_sched.h>
+#include <linux/ethtool.h>
+#include <linux/in.h>
+#include <linux/random.h>
+#include <net/ip6_checksum.h>
+#include <linux/bitops.h>
+
+#include "qede.h"
+
+static const char version[] = "QLogic QL4xxx 40G/100G Ethernet Driver qede "
+			      DRV_MODULE_VERSION "\n";
+
+MODULE_DESCRIPTION("QLogic 40G/100G Ethernet Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+static uint debug;
+module_param(debug, uint, 0);
+MODULE_PARM_DESC(debug, " Default debug msglevel");
+
+static const struct qed_eth_ops *qed_ops;
+
+#define CHIP_NUM_57980S_40		0x1634
+#define CHIP_NUM_57980S_10		0x1635
+#define CHIP_NUM_57980S_MF		0x1636
+#define CHIP_NUM_57980S_100		0x1644
+#define CHIP_NUM_57980S_50		0x1654
+#define CHIP_NUM_57980S_25		0x1656
+
+#ifndef PCI_DEVICE_ID_NX2_57980E
+#define PCI_DEVICE_ID_57980S_40		CHIP_NUM_57980S_40
+#define PCI_DEVICE_ID_57980S_10		CHIP_NUM_57980S_10
+#define PCI_DEVICE_ID_57980S_MF		CHIP_NUM_57980S_MF
+#define PCI_DEVICE_ID_57980S_100	CHIP_NUM_57980S_100
+#define PCI_DEVICE_ID_57980S_50		CHIP_NUM_57980S_50
+#define PCI_DEVICE_ID_57980S_25		CHIP_NUM_57980S_25
+#endif
+
+static const struct pci_device_id qede_pci_tbl[] = {
+	{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_40), 0 },
+	{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_10), 0 },
+	{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_MF), 0 },
+	{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_100), 0 },
+	{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_50), 0 },
+	{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_25), 0 },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, qede_pci_tbl);
+
+static int qede_probe(struct pci_dev *pdev, const struct pci_device_id *id);
+
+#define TX_TIMEOUT		(5 * HZ)
+
+static void qede_remove(struct pci_dev *pdev);
+
+static struct pci_driver qede_pci_driver = {
+	.name = "qede",
+	.id_table = qede_pci_tbl,
+	.probe = qede_probe,
+	.remove = qede_remove,
+};
+
+static
+int __init qede_init(void)
+{
+	int ret;
+	u32 qed_ver;
+
+	pr_notice("qede_init: %s\n", version);
+
+	qed_ver = qed_get_protocol_version(QED_PROTOCOL_ETH);
+	if (qed_ver !=  QEDE_ETH_INTERFACE_VERSION) {
+		pr_notice("Version mismatch [%08x != %08x]\n",
+			  qed_ver,
+			  QEDE_ETH_INTERFACE_VERSION);
+		return -EINVAL;
+	}
+
+	qed_ops = qed_get_eth_ops(QEDE_ETH_INTERFACE_VERSION);
+	if (!qed_ops) {
+		pr_notice("Failed to get qed ethtool operations\n");
+		return -EINVAL;
+	}
+
+	ret = pci_register_driver(&qede_pci_driver);
+	if (ret) {
+		pr_notice("Failed to register driver\n");
+		qed_put_eth_ops();
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void __exit qede_cleanup(void)
+{
+	pr_notice("qede_cleanup called\n");
+
+	pci_unregister_driver(&qede_pci_driver);
+	qed_put_eth_ops();
+}
+
+module_init(qede_init);
+module_exit(qede_cleanup);
+
+/* -------------------------------------------------------------------------
+ * START OF PROBE / REMOVE
+ * -------------------------------------------------------------------------
+ */
+
+static struct qede_dev *qede_alloc_etherdev(struct qed_dev *cdev,
+					    struct pci_dev *pdev,
+					    struct qed_dev_eth_info *info,
+					    u32 dp_module,
+					    u8 dp_level)
+{
+	struct net_device *ndev;
+	struct qede_dev *edev;
+
+	ndev = alloc_etherdev_mqs(sizeof(*edev),
+				  info->num_queues,
+				  info->num_queues);
+	if (!ndev) {
+		pr_err("etherdev allocation failed\n");
+		return NULL;
+	}
+
+	edev = netdev_priv(ndev);
+	edev->ndev = ndev;
+	edev->cdev = cdev;
+	edev->pdev = pdev;
+	edev->dp_module = dp_module;
+	edev->dp_level = dp_level;
+	edev->ops = qed_ops;
+
+	DP_INFO(edev, "Allocated netdev with 64 tx queues and 64 rx queues\n");
+
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+
+	memcpy(&edev->dev_info, info, sizeof(*info));
+
+	edev->num_tc = edev->dev_info.num_tc;
+
+	return edev;
+}
+
+static void qede_init_ndev(struct qede_dev *edev)
+{
+	struct net_device *ndev = edev->ndev;
+	struct pci_dev *pdev = edev->pdev;
+	u32 hw_features;
+
+	pci_set_drvdata(pdev, ndev);
+
+	ndev->mem_start = edev->dev_info.common.pci_mem_start;
+	ndev->base_addr = ndev->mem_start;
+	ndev->mem_end = edev->dev_info.common.pci_mem_end;
+	ndev->irq = edev->dev_info.common.pci_irq;
+
+	ndev->watchdog_timeo = TX_TIMEOUT;
+
+	/* user-changeble features */
+	hw_features = NETIF_F_GRO | NETIF_F_SG |
+		      NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		      NETIF_F_TSO | NETIF_F_TSO6;
+
+	ndev->vlan_features = hw_features | NETIF_F_RXHASH | NETIF_F_RXCSUM |
+			      NETIF_F_HIGHDMA;
+	ndev->features = hw_features | NETIF_F_RXHASH | NETIF_F_RXCSUM |
+			 NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HIGHDMA |
+			 NETIF_F_HW_VLAN_CTAG_TX;
+
+	ndev->hw_features = hw_features;
+
+	/* Set network device HW mac */
+	ether_addr_copy(edev->ndev->dev_addr, edev->dev_info.common.hw_mac);
+}
+
+/* This function converts from 32b param to two params of level and module
+ * Input 32b decoding:
+ * b31 - enable all NOTICE prints. NOTICE prints are for deviation from the
+ * 'happy' flow, e.g. memory allocation failed.
+ * b30 - enable all INFO prints. INFO prints are for major steps in the flow
+ * and provide important parameters.
+ * b29-b0 - per-module bitmap, where each bit enables VERBOSE prints of that
+ * module. VERBOSE prints are for tracking the specific flow in low level.
+ *
+ * Notice that the level should be that of the lowest required logs.
+ */
+static void qede_config_debug(uint debug, u32 *p_dp_module, u8 *p_dp_level)
+{
+	*p_dp_level = QED_LEVEL_NOTICE;
+	*p_dp_module = 0;
+
+	if (debug & QED_LOG_VERBOSE_MASK) {
+		*p_dp_level = QED_LEVEL_VERBOSE;
+		*p_dp_module = (debug & 0x3FFFFFFF);
+	} else if (debug & QED_LOG_INFO_MASK) {
+		*p_dp_level = QED_LEVEL_INFO;
+	} else if (debug & QED_LOG_NOTICE_MASK) {
+		*p_dp_level = QED_LEVEL_NOTICE;
+	}
+}
+
+static void qede_update_pf_params(struct qed_dev *cdev)
+{
+	struct qed_pf_params pf_params;
+
+	/* 16 rx + 16 tx */
+	memset(&pf_params, 0, sizeof(struct qed_pf_params));
+	pf_params.eth_pf_params.num_cons = 32;
+	qed_ops->common->update_pf_params(cdev, &pf_params);
+}
+
+enum qede_probe_mode {
+	QEDE_PROBE_NORMAL,
+};
+
+static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level,
+			enum qede_probe_mode mode)
+{
+	struct qed_slowpath_params params;
+	struct qed_dev_eth_info dev_info;
+	struct qede_dev *edev;
+	struct qed_dev *cdev;
+	int rc;
+
+	if (unlikely(dp_level & QED_LEVEL_INFO))
+		pr_notice("Starting qede probe\n");
+
+	cdev = qed_ops->common->probe(pdev, QED_PROTOCOL_ETH,
+				      dp_module, dp_level);
+	if (!cdev) {
+		rc = -ENODEV;
+		goto err0;
+	}
+
+	qede_update_pf_params(cdev);
+
+	/* Start the Slowpath-process */
+	memset(&params, 0, sizeof(struct qed_slowpath_params));
+	params.int_mode = QED_INT_MODE_MSIX;
+	params.drv_major = QEDE_MAJOR_VERSION;
+	params.drv_minor = QEDE_MINOR_VERSION;
+	params.drv_rev = QEDE_REVISION_VERSION;
+	params.drv_eng = QEDE_ENGINEERING_VERSION;
+	strlcpy(params.name, "qede LAN", QED_DRV_VER_STR_SIZE);
+	rc = qed_ops->common->slowpath_start(cdev, &params);
+	if (rc) {
+		pr_notice("Cannot start slowpath\n");
+		goto err1;
+	}
+
+	/* Learn information crucial for qede to progress */
+	rc = qed_ops->fill_dev_info(cdev, &dev_info);
+	if (rc)
+		goto err2;
+
+	edev = qede_alloc_etherdev(cdev, pdev, &dev_info, dp_module,
+				   dp_level);
+	if (!edev) {
+		rc = -ENOMEM;
+		goto err2;
+	}
+
+	qede_init_ndev(edev);
+
+	edev->ops->common->set_id(cdev, edev->ndev->name, DRV_MODULE_VERSION);
+
+	DP_INFO(edev, "Ending successfully qede probe\n");
+
+	return 0;
+
+err2:
+	qed_ops->common->slowpath_stop(cdev);
+err1:
+	qed_ops->common->remove(cdev);
+err0:
+	return rc;
+}
+
+static int qede_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	u32 dp_module = 0;
+	u8 dp_level = 0;
+
+	qede_config_debug(debug, &dp_module, &dp_level);
+
+	return __qede_probe(pdev, dp_module, dp_level,
+			    QEDE_PROBE_NORMAL);
+}
+
+enum qede_remove_mode {
+	QEDE_REMOVE_NORMAL,
+};
+
+static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode)
+{
+	struct net_device *ndev = pci_get_drvdata(pdev);
+	struct qede_dev *edev = netdev_priv(ndev);
+	struct qed_dev *cdev = edev->cdev;
+
+	DP_INFO(edev, "Starting qede_remove\n");
+
+	edev->ops->common->set_power_state(cdev, PCI_D0);
+
+	pci_set_drvdata(pdev, NULL);
+
+	free_netdev(ndev);
+
+	/* Use global ops since we've freed edev */
+	qed_ops->common->slowpath_stop(cdev);
+	qed_ops->common->remove(cdev);
+
+	pr_notice("Ending successfully qede_remove\n");
+}
+
+static void qede_remove(struct pci_dev *pdev)
+{
+	__qede_remove(pdev, QEDE_REMOVE_NORMAL);
+}