Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc device tree updates, take 2 from Olof Johansson:
 "This branch contains mostly a set of changes for device tree bindings
  on Samsung Exynos.  It was staged behind the other branches due to
  dependencies on pincontrol and board changes."

Fix up trivial conflict in drivers/clocksource/Makefile due to earlier
conflict resolution.

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: Add nodes for dw_mmc controllers for Samsung EXYNOS5250 platforms
  ARM: EXYNOS: Add AUXDATA support for MSHC controllers
  ARM: EXYNOS: Add support for MSHC controller clocks
  ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen
  ARM: dts: use uart2 for console on smdkv310 and smdk5250
  ARM: dts: Add basic dts file for Samsung Trats board
  ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters
  ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4
  ARM: dts: Assume status of all optional nodes as disabled for exynos4
  ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt
  ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to exynos4.dtsi

arch/arm/boot/dts/exynos4.dtsi

+/*
+ * Samsung's Exynos4 SoC series common device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4 SoC series device nodes are listed in this file.  Particular
+ * SoCs from Exynos4 series can include this file and provide values for SoCs
+ * specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+	};
+
+	gic:interrupt-controller@10490000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+	};
+
+	combiner:interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0x10440000 0x1000>;
+	};
+
+	watchdog@10060000 {
+		compatible = "samsung,s3c2410-wdt";
+		reg = <0x10060000 0x100>;
+		interrupts = <0 43 0>;
+		status = "disabled";
+	};
+
+	rtc@10070000 {
+		compatible = "samsung,s3c6410-rtc";
+		reg = <0x10070000 0x100>;
+		interrupts = <0 44 0>, <0 45 0>;
+		status = "disabled";
+	};
+
+	keypad@100A0000 {
+		compatible = "samsung,s5pv210-keypad";
+		reg = <0x100A0000 0x100>;
+		interrupts = <0 109 0>;
+		status = "disabled";
+	};
+
+	sdhci@12510000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12510000 0x100>;
+		interrupts = <0 73 0>;
+		status = "disabled";
+	};
+
+	sdhci@12520000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12520000 0x100>;
+		interrupts = <0 74 0>;
+		status = "disabled";
+	};
+
+	sdhci@12530000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12530000 0x100>;
+		interrupts = <0 75 0>;
+		status = "disabled";
+	};
+
+	sdhci@12540000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12540000 0x100>;
+		interrupts = <0 76 0>;
+		status = "disabled";
+	};
+
+	serial@13800000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13800000 0x100>;
+		interrupts = <0 52 0>;
+		status = "disabled";
+	};
+
+	serial@13810000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13810000 0x100>;
+		interrupts = <0 53 0>;
+		status = "disabled";
+	};
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		status = "disabled";
+	};
+
+	serial@13830000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13830000 0x100>;
+		interrupts = <0 55 0>;
+		status = "disabled";
+	};
+
+	i2c@13860000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13860000 0x100>;
+		interrupts = <0 58 0>;
+		status = "disabled";
+	};
+
+	i2c@13870000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13870000 0x100>;
+		interrupts = <0 59 0>;
+		status = "disabled";
+	};
+
+	i2c@13880000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13880000 0x100>;
+		interrupts = <0 60 0>;
+		status = "disabled";
+	};
+
+	i2c@13890000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13890000 0x100>;
+		interrupts = <0 61 0>;
+		status = "disabled";
+	};
+
+	i2c@138A0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138A0000 0x100>;
+		interrupts = <0 62 0>;
+		status = "disabled";
+	};
+
+	i2c@138B0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138B0000 0x100>;
+		interrupts = <0 63 0>;
+		status = "disabled";
+	};
+
+	i2c@138C0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138C0000 0x100>;
+		interrupts = <0 64 0>;
+		status = "disabled";
+	};
+
+	i2c@138D0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138D0000 0x100>;
+		interrupts = <0 65 0>;
+		status = "disabled";
+	};
+
+	spi_0: spi@13920000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13920000 0x100>;
+		interrupts = <0 66 0>;
+		tx-dma-channel = <&pdma0 7>; /* preliminary */
+		rx-dma-channel = <&pdma0 6>; /* preliminary */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi_1: spi@13930000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13930000 0x100>;
+		interrupts = <0 67 0>;
+		tx-dma-channel = <&pdma1 7>; /* preliminary */
+		rx-dma-channel = <&pdma1 6>; /* preliminary */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi_2: spi@13940000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13940000 0x100>;
+		interrupts = <0 68 0>;
+		tx-dma-channel = <&pdma0 9>; /* preliminary */
+		rx-dma-channel = <&pdma0 8>; /* preliminary */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		pdma0: pdma@12680000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12680000 0x1000>;
+			interrupts = <0 35 0>;
+		};
+
+		pdma1: pdma@12690000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12690000 0x1000>;
+			interrupts = <0 36 0>;
+		};
+	};
+};

arch/arm/boot/dts/exynos4210-origen.dts

@@ -40,6 +40,7 @@ sdhci@12530000 {
 			<&gpk2 4 2 3 3>,
 			<&gpk2 5 2 3 3>,
 			<&gpk2 6 2 3 3>;
+		status = "okay";
 	};
 
 	sdhci@12510000 {
@@ -53,6 +54,7 @@ sdhci@12510000 {
 			<&gpk0 4 2 3 3>,
 			<&gpk0 5 2 3 3>,
 			<&gpk0 6 2 3 3>;
+		status = "okay";
 	};
 
 	gpio_keys {
@@ -64,30 +66,35 @@ up {
 			label = "Up";
 			gpios = <&gpx2 0 0 0x10000 2>;
 			linux,code = <103>;
+			gpio-key,wakeup;
 		};
 
 		down {
 			label = "Down";
 			gpios = <&gpx2 1 0 0x10000 2>;
 			linux,code = <108>;
+			gpio-key,wakeup;
 		};
 
 		back {
 			label = "Back";
 			gpios = <&gpx1 7 0 0x10000 2>;
 			linux,code = <158>;
+			gpio-key,wakeup;
 		};
 
 		home {
 			label = "Home";
 			gpios = <&gpx1 6 0 0x10000 2>;
 			linux,code = <102>;
+			gpio-key,wakeup;
 		};
 
 		menu {
 			label = "Menu";
 			gpios = <&gpx1 5 0 0x10000 2>;
 			linux,code = <139>;
+			gpio-key,wakeup;
 		};
 	};
 
@@ -98,60 +105,4 @@ status {
 			linux,default-trigger = "heartbeat";
 		};
 	};
-
-	keypad@100A0000 {
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		status = "disabled";
-	};
-
-	i2c@13860000 {
-		status = "disabled";
-	};
-
-	i2c@13870000 {
-		status = "disabled";
-	};
-
-	i2c@13880000 {
-		status = "disabled";
-	};
-
-	i2c@13890000 {
-		status = "disabled";
-	};
-
-	i2c@138A0000 {
-		status = "disabled";
-	};
-
-	i2c@138B0000 {
-		status = "disabled";
-	};
-
-	i2c@138C0000 {
-		status = "disabled";
-	};
-
-	i2c@138D0000 {
-		status = "disabled";
-	};
-
-	spi_0: spi@13920000 {
-		status = "disabled";
-	};
-
-	spi_1: spi@13930000 {
-		status = "disabled";
-	};
-
-	spi_2: spi@13940000 {
-		status = "disabled";
-	};
 };

arch/arm/boot/dts/exynos4210-smdkv310.dts

@@ -26,7 +26,7 @@ memory {
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
 	sdhci@12530000 {
@@ -40,6 +40,7 @@ sdhci@12530000 {
 			<&gpk2 4 2 3 3>,
 			<&gpk2 5 2 3 3>,
 			<&gpk2 6 2 3 3>;
+		status = "okay";
 	};
 
 	keypad@100A0000 {
@@ -47,6 +48,7 @@ keypad@100A0000 {
 		samsung,keypad-num-columns = <8>;
 		linux,keypad-no-autorepeat;
 		linux,keypad-wakeup;
+		status = "okay";
 
 		row-gpios = <&gpx2 0 3 3 0>,
 			    <&gpx2 1 3 3 0>;
@@ -128,6 +130,7 @@ i2c@13860000 {
 		samsung,i2c-max-bus-freq = <20000>;
 		gpios = <&gpd1 0 2 3 0>,
 			<&gpd1 1 2 3 0>;
+		status = "okay";
 
 		eeprom@50 {
 			compatible = "samsung,24ad0xd1";
@@ -140,58 +143,11 @@ eeprom@52 {
 		};
 	};
 
-	sdhci@12510000 {
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		status = "disabled";
-	};
-
-	i2c@13870000 {
-		status = "disabled";
-	};
-
-	i2c@13880000 {
-		status = "disabled";
-	};
-
-	i2c@13890000 {
-		status = "disabled";
-	};
-
-	i2c@138A0000 {
-		status = "disabled";
-	};
-
-	i2c@138B0000 {
-		status = "disabled";
-	};
-
-	i2c@138C0000 {
-		status = "disabled";
-	};
-
-	i2c@138D0000 {
-		status = "disabled";
-	};
-
-	spi_0: spi@13920000 {
-		status = "disabled";
-	};
-
-	spi_1: spi@13930000 {
-		status = "disabled";
-	};
-
 	spi_2: spi@13940000 {
 		gpios = <&gpc1 1 5 3 0>,
 			<&gpc1 3 5 3 0>,
 			<&gpc1 4 5 3 0>;
+		status = "okay";
 
 		w25x80@0 {
 			#address-cells = <1>;

arch/arm/boot/dts/exynos4210-trats.dts

+/*
+ * Samsung's Exynos4210 based Trats board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4210.dtsi"
+
+/ {
+	model = "Samsung Trats based on Exynos4210";
+	compatible = "samsung,trats", "samsung,exynos4210";
+
+	memory {
+		reg =  <0x40000000 0x20000000
+			0x60000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+	};
+
+	vemmc_reg: voltage-regulator@0 {
+	        compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 1 0 0>;
+		enable-active-high;
+	};
+
+	sdhci_emmc: sdhci@12510000 {
+		bus-width = <8>;
+		non-removable;
+		broken-voltage;
+		gpios = <&gpk0 0 2 0 3>,
+			<&gpk0 1 2 0 3>,
+			<&gpk0 3 2 2 3>,
+			<&gpk0 4 2 2 3>,
+			<&gpk0 5 2 2 3>,
+			<&gpk0 6 2 2 3>,
+			<&gpk1 3 3 3 3>,
+			<&gpk1 4 3 3 3>,
+			<&gpk1 5 3 3 3>,
+			<&gpk1 6 3 3 3>;
+		vmmc-supply = <&vemmc_reg>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	i2c@138B0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		gpios = <&gpb 6 3 3 0>,
+			<&gpb 7 3 3 0>;
+		status = "okay";
+
+		max8997_pmic@66 {
+			compatible = "maxim,max8997-pmic";
+
+			reg = <0x66>;
+
+			max8997,pmic-buck1-uses-gpio-dvs;
+			max8997,pmic-buck2-uses-gpio-dvs;
+			max8997,pmic-buck5-uses-gpio-dvs;
+
+			max8997,pmic-ignore-gpiodvs-side-effect;
+			max8997,pmic-buck125-default-dvs-idx = <0>;
+
+			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>,
+						         <&gpx0 6 1 0 0>,
+							 <&gpl0 0 1 0 0>;
+
+			max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+							 <1250000>, <1200000>,
+							 <1150000>, <1100000>,
+							 <1000000>, <950000>;
+
+			max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+							 <950000>,  <900000>,
+							 <1100000>, <1000000>,
+							 <950000>,  <900000>;
+
+			max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>;
+
+			regulators {
+				valive_reg: LDO2 {
+				     regulator-name = "VALIVE_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				vusb_reg: LDO3 {
+				     regulator-name = "VUSB_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				};
+
+				vmipi_reg: LDO4 {
+				     regulator-name = "VMIPI_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vpda_reg: LDO6 {
+				     regulator-name = "VCC_1.8V_PDA";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				     regulator-always-on;
+				};
+
+				vcam_reg: LDO7 {
+				     regulator-name = "CAM_ISP_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vusbdac_reg: LDO8 {
+				     regulator-name = "VUSB/VDAC_3.3V_C210";
+				     regulator-min-microvolt = <3300000>;
+				     regulator-max-microvolt = <3300000>;
+				};
+
+				vccpda_reg: LDO9 {
+				     regulator-name = "VCC_2.8V_PDA";
+				     regulator-min-microvolt = <2800000>;
+				     regulator-max-microvolt = <2800000>;
+				     regulator-always-on;
+				};
+
+				vpll_reg: LDO10 {
+				     regulator-name = "VPLL_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				vcclcd_reg: LDO13 {
+				     regulator-name = "VCC_3.3V_LCD";
+				     regulator-min-microvolt = <3300000>;
+				     regulator-max-microvolt = <3300000>;
+				};
+
+				vlcd_reg: LDO15 {
+				     regulator-name = "VLCD_2.2V";
+				     regulator-min-microvolt = <2200000>;
+				     regulator-max-microvolt = <2200000>;
+				};
+
+				camsensor_reg: LDO16 {
+				     regulator-name = "CAM_SENSOR_IO_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vddq_reg: LDO21 {
+				     regulator-name = "VDDQ_M1M2_1.2V";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				     regulator-always-on;
+				};
+
+				varm_breg: BUCK1 {
+				     regulator-name = "VARM_1.2V_C210";
+				     regulator-min-microvolt = <900000>;
+				     regulator-max-microvolt = <1350000>;
+				     regulator-always-on;
+				};
+
+				vint_breg: BUCK2 {
+				     regulator-name = "VINT_1.1V_C210";
+				     regulator-min-microvolt = <900000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				camisp_breg: BUCK4 {
+				     regulator-name = "CAM_ISP_CORE_1.2V";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				};
+
+				vmem_breg: BUCK5 {
+				     regulator-name = "VMEM_1.2V_C210";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				     regulator-always-on;
+				};
+
+				vccsub_breg: BUCK7 {
+				     regulator-name = "VCC_SUB_2.0V";
+				     regulator-min-microvolt = <2000000>;
+				     regulator-max-microvolt = <2000000>;
+				     regulator-always-on;
+				};
+
+				safe1_sreg: ESAFEOUT1 {
+				     regulator-name = "SAFEOUT1";
+				     regulator-always-on;
+				};
+
+				safe2_sreg: ESAFEOUT2 {
+				     regulator-name = "SAFEOUT2";
+				     regulator-boot-on;
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/exynos4210.dtsi

@@ -19,35 +19,23 @@
  * published by the Free Software Foundation.
 */
 
-/include/ "skeleton.dtsi"
+/include/ "exynos4.dtsi"
 /include/ "exynos4210-pinctrl.dtsi"
 
 / {
 	compatible = "samsung,exynos4210";
-	interrupt-parent = <&gic>;
 
 	aliases {
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
 	};
 
 	gic:interrupt-controller@10490000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
 		cpu-offset = <0x8000>;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
 	};
 
 	combiner:interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0x10440000 0x1000>;
 		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
 			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
 			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
@@ -75,10 +63,10 @@ wakup_eint: wakeup-interrupt-controller {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
-					<0 32 0>;
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+				     <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
+				     <0 32 0>;
 		};
 	};
 
@@ -87,170 +75,6 @@ pinctrl_2: pinctrl@03860000 {
 		reg = <0x03860000 0x1000>;
 	};
 
-	watchdog@10060000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 43 0>;
-	};
-
-	rtc@10070000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x10070000 0x100>;
-		interrupts = <0 44 0>, <0 45 0>;
-	};
-
-	keypad@100A0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <0 109 0>;
-	};
-
-	sdhci@12510000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12510000 0x100>;
-		interrupts = <0 73 0>;
-	};
-
-	sdhci@12520000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12520000 0x100>;
-		interrupts = <0 74 0>;
-	};
-
-	sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
-	};
-
-	sdhci@12540000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12540000 0x100>;
-		interrupts = <0 76 0>;
-	};
-
-	serial@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
-	};
-
-	serial@13810000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13810000 0x100>;
-		interrupts = <0 53 0>;
-	};
-
-	serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
-	};
-
-	serial@13830000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13830000 0x100>;
-		interrupts = <0 55 0>;
-	};
-
-	i2c@13860000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13860000 0x100>;
-		interrupts = <0 58 0>;
-	};
-
-	i2c@13870000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <0 59 0>;
-	};
-
-	i2c@13880000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13880000 0x100>;
-		interrupts = <0 60 0>;
-	};
-
-	i2c@13890000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13890000 0x100>;
-		interrupts = <0 61 0>;
-	};
-
-	i2c@138A0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138A0000 0x100>;
-		interrupts = <0 62 0>;
-	};
-
-	i2c@138B0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138B0000 0x100>;
-		interrupts = <0 63 0>;
-	};
-
-	i2c@138C0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138C0000 0x100>;
-		interrupts = <0 64 0>;
-	};
-
-	i2c@138D0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138D0000 0x100>;
-		interrupts = <0 65 0>;
-	};
-
-	spi_0: spi@13920000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13920000 0x100>;
-		interrupts = <0 66 0>;
-		tx-dma-channel = <&pdma0 7>; /* preliminary */
-		rx-dma-channel = <&pdma0 6>; /* preliminary */
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	spi_1: spi@13930000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13930000 0x100>;
-		interrupts = <0 67 0>;
-		tx-dma-channel = <&pdma1 7>; /* preliminary */
-		rx-dma-channel = <&pdma1 6>; /* preliminary */
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	spi_2: spi@13940000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13940000 0x100>;
-		interrupts = <0 68 0>;
-		tx-dma-channel = <&pdma0 9>; /* preliminary */
-		rx-dma-channel = <&pdma0 8>; /* preliminary */
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		pdma0: pdma@12680000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12680000 0x1000>;
-			interrupts = <0 35 0>;
-		};
-
-		pdma1: pdma@12690000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12690000 0x1000>;
-			interrupts = <0 36 0>;
-		};
-	};
-
 	gpio-controllers {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -16,12 +16,19 @@ / {
 	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
 	compatible = "samsung,smdk5250", "samsung,exynos5250";
 
+	aliases {
+		mshc0 = &dwmmc_0;
+		mshc1 = &dwmmc_1;
+		mshc2 = &dwmmc_2;
+		mshc3 = &dwmmc_3;
+	};
+
 	memory {
 		reg = <0x40000000 0x80000000>;
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
 	i2c@12C60000 {
@@ -72,6 +79,56 @@ i2c@12CD0000 {
 		status = "disabled";
 	};
 
+	dwmmc_0: dwmmc0@12200000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
+				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
+		};
+	};
+
+	dwmmc_1: dwmmc1@12210000 {
+		status = "disabled";
+	};
+
+	dwmmc_2: dwmmc2@12220000 {
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
+				<&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
+				<&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
+		};
+	};
+
+	dwmmc_3: dwmmc3@12230000 {
+		status = "disabled";
+	};
+
 	spi_0: spi@12d20000 {
 		status = "disabled";
 	};

arch/arm/boot/dts/exynos5250.dtsi

@@ -186,6 +186,38 @@ spi_2: spi@12d40000 {
 		#size-cells = <0>;
 	};
 
+	dwmmc0@12200000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12200000 0x1000>;
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc1@12210000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12210000 0x1000>;
+		interrupts = <0 76 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc2@12220000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12220000 0x1000>;
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc3@12230000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12230000 0x1000>;
+		interrupts = <0 78 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/mach-exynos/Makefile.boot

    zreladdr-y	+= 0x40008000
 params_phys-y	:= 0x40000100
 
-dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
+dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb exynos4210-trats.dtb
 dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb

arch/arm/mach-exynos/clock-exynos5.c

@@ -626,34 +626,29 @@ static struct clk exynos5_init_clocks_off[] = {
 		.enable		= exynos5_clk_ip_peris_ctrl,
 		.ctrlbit	= (1 << 19),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.0",
+		.name		= "biu",	/* bus interface unit clock */
+		.devname	= "dw_mmc.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.1",
+		.name		= "biu",
+		.devname	= "dw_mmc.1",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.2",
+		.name		= "biu",
+		.devname	= "dw_mmc.2",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.3",
+		.name		= "biu",
+		.devname	= "dw_mmc.3",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 15),
-	}, {
-		.name		= "dwmci",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 16),
 	}, {
 		.name		= "sata",
 		.devname	= "ahci",
@@ -1095,8 +1090,8 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = {
 
 static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.0",
+		.name		= "ciu",	/* card interface unit clock */
+		.devname	= "dw_mmc.0",
 		.parent		= &exynos5_clk_dout_mmc0.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1106,8 +1101,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 
 static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.1",
+		.name		= "ciu",
+		.devname	= "dw_mmc.1",
 		.parent		= &exynos5_clk_dout_mmc1.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -1117,8 +1112,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 
 static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.2",
+		.name		= "ciu",
+		.devname	= "dw_mmc.2",
 		.parent		= &exynos5_clk_dout_mmc2.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1128,8 +1123,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 
 static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.3",
+		.name		= "ciu",
+		.devname	= "dw_mmc.3",
 		.parent		= &exynos5_clk_dout_mmc3.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -1214,14 +1209,6 @@ struct clksrc_clk exynos5_clk_sclk_fimd1 = {
 
 static struct clksrc_clk exynos5_clksrcs[] = {
 	{
-		.clk	= {
-			.name		= "sclk_dwmci",
-			.parent		= &exynos5_clk_dout_mmc4.clk,
-			.enable		= exynos5_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 },
-	}, {
 		.clk	= {
 			.name		= "aclk_266_gscl",
 		},

arch/arm/mach-exynos/include/mach/map.h

@@ -177,6 +177,10 @@
 
 #define EXYNOS4_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
 #define EXYNOS4_PA_DWMCI		0x12550000
+#define EXYNOS5_PA_DWMCI0		0x12200000
+#define EXYNOS5_PA_DWMCI1		0x12210000
+#define EXYNOS5_PA_DWMCI2		0x12220000
+#define EXYNOS5_PA_DWMCI3		0x12230000
 
 #define EXYNOS4_PA_HSOTG		0x12480000
 #define EXYNOS4_PA_USB_HSPHY		0x125B0000

arch/arm/mach-exynos/mach-exynos4-dt.c

 /*
- * Samsung's Exynos4210 flattened device tree enabled machine
+ * Samsung's EXYNOS4 flattened device tree enabled machine
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -36,7 +36,7 @@
  * at some point, the drivers should be capable of parsing all the platform
  * data from the device tree.
  */
-static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
+static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
 				"exynos4210-uart.0", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
@@ -55,6 +55,20 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
 				"exynos4-sdhci.3", NULL),
 	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
 				"s3c2440-i2c.0", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1),
+				"s3c2440-i2c.1", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2),
+				"s3c2440-i2c.2", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3),
+				"s3c2440-i2c.3", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4),
+				"s3c2440-i2c.4", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5),
+				"s3c2440-i2c.5", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6),
+				"s3c2440-i2c.6", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7),
+				"s3c2440-i2c.7", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
 				"exynos4210-spi.0", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
@@ -66,19 +80,19 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
 	{},
 };
 
-static void __init exynos4210_dt_map_io(void)
+static void __init exynos4_dt_map_io(void)
 {
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 }
 
-static void __init exynos4210_dt_machine_init(void)
+static void __init exynos4_dt_machine_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table,
-				exynos4210_auxdata_lookup, NULL);
+				exynos4_auxdata_lookup, NULL);
 }
 
-static char const *exynos4210_dt_compat[] __initdata = {
+static char const *exynos4_dt_compat[] __initdata = {
 	"samsung,exynos4210",
 	NULL
 };
@@ -86,11 +100,11 @@ static char const *exynos4210_dt_compat[] __initdata = {
 DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
 	.init_irq	= exynos4_init_irq,
-	.map_io		= exynos4210_dt_map_io,
+	.map_io		= exynos4_dt_map_io,
 	.handle_irq	= gic_handle_irq,
-	.init_machine	= exynos4210_dt_machine_init,
+	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
-	.dt_compat	= exynos4210_dt_compat,
+	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -47,6 +47,14 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"s3c2440-i2c.0", NULL),
 	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
 				"s3c2440-i2c.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
+				"dw_mmc.0", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
+				"dw_mmc.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2,
+				"dw_mmc.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3,
+				"dw_mmc.3", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
 				"exynos4210-spi.0", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,