Commit e7f758fa authored by William Breathitt Gray's avatar William Breathitt Gray Committed by Bartosz Golaszewski

gpio: pci-idio-16: Utilize the idio-16 GPIO library

The ACCES PCI-IDIO-16 device is part of the ACCES IDIO-16 family, so the
idio-16 GPIO library module is selected and utilized to consolidate
code.
Signed-off-by: default avatarWilliam Breathitt Gray <william.gray@linaro.org>
Signed-off-by: default avatarBartosz Golaszewski <bartosz.golaszewski@linaro.org>
parent c4ec384c
......@@ -1563,6 +1563,7 @@ config GPIO_PCH
config GPIO_PCI_IDIO_16
tristate "ACCES PCI-IDIO-16 GPIO support"
select GPIOLIB_IRQCHIP
select GPIO_IDIO_16
help
Enables GPIO support for the ACCES PCI-IDIO-16. An interrupt is
generated when any of the inputs change state (low to high or high to
......
......@@ -3,8 +3,7 @@
* GPIO driver for the ACCES PCI-IDIO-16
* Copyright (C) 2017 William Breathitt Gray
*/
#include <linux/bitmap.h>
#include <linux/bitops.h>
#include <linux/bits.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/gpio/driver.h>
......@@ -16,51 +15,28 @@
#include <linux/spinlock.h>
#include <linux/types.h>
/**
* struct idio_16_gpio_reg - GPIO device registers structure
* @out0_7: Read: FET Drive Outputs 0-7
* Write: FET Drive Outputs 0-7
* @in0_7: Read: Isolated Inputs 0-7
* Write: Clear Interrupt
* @irq_ctl: Read: Enable IRQ
* Write: Disable IRQ
* @filter_ctl: Read: Activate Input Filters 0-15
* Write: Deactivate Input Filters 0-15
* @out8_15: Read: FET Drive Outputs 8-15
* Write: FET Drive Outputs 8-15
* @in8_15: Read: Isolated Inputs 8-15
* Write: Unused
* @irq_status: Read: Interrupt status
* Write: Unused
*/
struct idio_16_gpio_reg {
u8 out0_7;
u8 in0_7;
u8 irq_ctl;
u8 filter_ctl;
u8 out8_15;
u8 in8_15;
u8 irq_status;
};
#include "gpio-idio-16.h"
/**
* struct idio_16_gpio - GPIO device private data structure
* @chip: instance of the gpio_chip
* @lock: synchronization lock to prevent I/O race conditions
* @reg: I/O address offset for the GPIO device registers
* @state: ACCES IDIO-16 device state
* @irq_mask: I/O bits affected by interrupts
*/
struct idio_16_gpio {
struct gpio_chip chip;
raw_spinlock_t lock;
struct idio_16_gpio_reg __iomem *reg;
struct idio_16 __iomem *reg;
struct idio_16_state state;
unsigned long irq_mask;
};
static int idio_16_gpio_get_direction(struct gpio_chip *chip,
unsigned int offset)
{
if (offset > 15)
if (idio_16_get_direction(offset))
return GPIO_LINE_DIRECTION_IN;
return GPIO_LINE_DIRECTION_OUT;
......@@ -82,43 +58,16 @@ static int idio_16_gpio_direction_output(struct gpio_chip *chip,
static int idio_16_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
unsigned long mask = BIT(offset);
if (offset < 8)
return !!(ioread8(&idio16gpio->reg->out0_7) & mask);
if (offset < 16)
return !!(ioread8(&idio16gpio->reg->out8_15) & (mask >> 8));
if (offset < 24)
return !!(ioread8(&idio16gpio->reg->in0_7) & (mask >> 16));
return !!(ioread8(&idio16gpio->reg->in8_15) & (mask >> 24));
return idio_16_get(idio16gpio->reg, &idio16gpio->state, offset);
}
static int idio_16_gpio_get_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
unsigned long offset;
unsigned long gpio_mask;
void __iomem *ports[] = {
&idio16gpio->reg->out0_7, &idio16gpio->reg->out8_15,
&idio16gpio->reg->in0_7, &idio16gpio->reg->in8_15,
};
void __iomem *port_addr;
unsigned long port_state;
/* clear bits array to a clean slate */
bitmap_zero(bits, chip->ngpio);
for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
port_addr = ports[offset / 8];
port_state = ioread8(port_addr) & gpio_mask;
bitmap_set_value8(bits, port_state, offset);
}
idio_16_get_multiple(idio16gpio->reg, &idio16gpio->state, mask, bits);
return 0;
}
......@@ -126,61 +75,16 @@ static void idio_16_gpio_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
unsigned int mask = BIT(offset);
void __iomem *base;
unsigned long flags;
unsigned int out_state;
if (offset > 15)
return;
if (offset > 7) {
mask >>= 8;
base = &idio16gpio->reg->out8_15;
} else
base = &idio16gpio->reg->out0_7;
raw_spin_lock_irqsave(&idio16gpio->lock, flags);
if (value)
out_state = ioread8(base) | mask;
else
out_state = ioread8(base) & ~mask;
iowrite8(out_state, base);
raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
idio_16_set(idio16gpio->reg, &idio16gpio->state, offset, value);
}
static void idio_16_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
unsigned long offset;
unsigned long gpio_mask;
void __iomem *ports[] = {
&idio16gpio->reg->out0_7, &idio16gpio->reg->out8_15,
};
size_t index;
void __iomem *port_addr;
unsigned long bitmask;
unsigned long flags;
unsigned long out_state;
for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
index = offset / 8;
port_addr = ports[index];
bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
raw_spin_lock_irqsave(&idio16gpio->lock, flags);
out_state = ioread8(port_addr) & ~gpio_mask;
out_state |= bitmask;
iowrite8(out_state, port_addr);
raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
}
idio_16_set_multiple(idio16gpio->reg, &idio16gpio->state, mask, bits);
}
static void idio_16_irq_ack(struct irq_data *data)
......@@ -335,6 +239,8 @@ static int idio_16_probe(struct pci_dev *pdev, const struct pci_device_id *id)
idio16gpio->chip.set = idio_16_gpio_set;
idio16gpio->chip.set_multiple = idio_16_gpio_set_multiple;
idio_16_state_init(&idio16gpio->state);
girq = &idio16gpio->chip.irq;
girq->chip = &idio_16_irqchip;
/* This will let us handle the parent IRQ in the driver */
......@@ -379,3 +285,4 @@ module_pci_driver(idio_16_driver);
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
MODULE_DESCRIPTION("ACCES PCI-IDIO-16 GPIO driver");
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS(GPIO_IDIO_16);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment