scsi: hisi_sas: relocate some common code for v3 hw

Much code of PM suspend function also exists in soft reset function. This
is not concise. So, this patch relocates the common code of these two
functions to a separate function.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/hisi_sas/hisi_sas_v3_hw.c

@@ -210,6 +210,8 @@
 
 #define AXI_MASTER_CFG_BASE		(0x5000)
 #define AM_CTRL_GLOBAL			(0x0)
+#define AM_CTRL_SHUTDOWN_REQ_OFF	0
+#define AM_CTRL_SHUTDOWN_REQ_MSK	(0x1 << AM_CTRL_SHUTDOWN_REQ_OFF)
 #define AM_CURR_TRANS_RETURN	(0x150)
 
 #define AM_CFG_MAX_TRANS		(0x5010)
@@ -1976,11 +1978,11 @@ static void phy_get_events_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
 
 }
 
-static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
+static int disable_host_v3_hw(struct hisi_hba *hisi_hba)
 {
 	struct device *dev = hisi_hba->dev;
+	u32 status, reg_val;
 	int rc;
-	u32 status;
 
 	interrupt_disable_v3_hw(hisi_hba);
 	hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
@@ -1990,14 +1992,32 @@ static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
 
 	mdelay(10);
 
-	hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE + AM_CTRL_GLOBAL, 0x1);
+	reg_val = hisi_sas_read32(hisi_hba, AXI_MASTER_CFG_BASE +
+				  AM_CTRL_GLOBAL);
+	reg_val |= AM_CTRL_SHUTDOWN_REQ_MSK;
+	hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE +
+			 AM_CTRL_GLOBAL, reg_val);
 
 	/* wait until bus idle */
 	rc = hisi_sas_read32_poll_timeout(AXI_MASTER_CFG_BASE +
 					  AM_CURR_TRANS_RETURN, status,
 					  status == 0x3, 10, 100);
 	if (rc) {
-		dev_err(dev, "axi bus is not idle, rc = %d\n", rc);
+		dev_err(dev, "axi bus is not idle, rc=%d\n", rc);
+		return rc;
+	}
+
+	return 0;
+}
+
+static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
+{
+	struct device *dev = hisi_hba->dev;
+	int rc;
+
+	rc = disable_host_v3_hw(hisi_hba);
+	if (rc) {
+		dev_err(dev, "soft reset: disable host failed rc=%d\n", rc);
 		return rc;
 	}
 
@@ -2456,9 +2476,8 @@ static int hisi_sas_v3_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct hisi_hba *hisi_hba = sha->lldd_ha;
 	struct device *dev = hisi_hba->dev;
 	struct Scsi_Host *shost = hisi_hba->shost;
-	u32 device_state, status;
+	u32 device_state;
 	int rc;
-	u32 reg_val;
 
 	if (!pdev->pm_cap) {
 		dev_err(dev, "PCI PM not supported\n");
@@ -2471,25 +2490,10 @@ static int hisi_sas_v3_suspend(struct pci_dev *pdev, pm_message_t state)
 	scsi_block_requests(shost);
 	set_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
 	flush_workqueue(hisi_hba->wq);
-	/* disable DQ/PHY/bus */
-	interrupt_disable_v3_hw(hisi_hba);
-	hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
-	hisi_sas_kill_tasklets(hisi_hba);
 
-	hisi_sas_stop_phys(hisi_hba);
-
-	reg_val = hisi_sas_read32(hisi_hba, AXI_MASTER_CFG_BASE +
-		AM_CTRL_GLOBAL);
-	reg_val |= 0x1;
-	hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE +
-		AM_CTRL_GLOBAL, reg_val);
-
-	/* wait until bus idle */
-	rc = hisi_sas_read32_poll_timeout(AXI_MASTER_CFG_BASE +
-					  AM_CURR_TRANS_RETURN, status,
-					  status == 0x3, 10, 100);
+	rc = disable_host_v3_hw(hisi_hba);
 	if (rc) {
-		dev_err(dev, "axi bus is not idle, rc = %d\n", rc);
+		dev_err(dev, "PM suspend: disable host failed rc=%d\n", rc);
 		clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
 		clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
 		scsi_unblock_requests(shost);