ath10k: fix RX of frames with broken FCS in monitor mode

So far, frames were forwarded regardless of the FCS correctness leading
to userspace applications listening on the monitor mode interface to
receive potentially broken frames, even with the "fcsfail" flag unset.

By default, with the "fcsfail" flag of a monitor mode interface
unset, frames with FCS errors should be dropped. With this patch, the
fcsfail flag is taken into account correctly.

Tested-on: QCA4019 firmware-5-ct-full-community-12.bin-lede.011

Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/ath10k/core.h

@@ -1181,6 +1181,7 @@ struct ath10k {
 
 	struct {
 		/* protected by data_lock */
+		u32 rx_crc_err_drop;
 		u32 fw_crash_counter;
 		u32 fw_warm_reset_counter;
 		u32 fw_cold_reset_counter;

drivers/net/wireless/ath/ath10k/debug.c

@@ -1094,6 +1094,7 @@ static const char ath10k_gstrings_stats[][ETH_GSTRING_LEN] = {
 	"d_rts_good",
 	"d_tx_power", /* in .5 dbM I think */
 	"d_rx_crc_err", /* fcs_bad */
+	"d_rx_crc_err_drop", /* frame with FCS error, dropped late in kernel */
 	"d_no_beacon",
 	"d_tx_mpdus_queued",
 	"d_tx_msdu_queued",
@@ -1193,6 +1194,7 @@ void ath10k_debug_get_et_stats(struct ieee80211_hw *hw,
 	data[i++] = pdev_stats->rts_good;
 	data[i++] = pdev_stats->chan_tx_power;
 	data[i++] = pdev_stats->fcs_bad;
+	data[i++] = ar->stats.rx_crc_err_drop;
 	data[i++] = pdev_stats->no_beacons;
 	data[i++] = pdev_stats->mpdu_enqued;
 	data[i++] = pdev_stats->msdu_enqued;

drivers/net/wireless/ath/ath10k/htt_rx.c

@@ -1285,6 +1285,13 @@ static void ath10k_process_rx(struct ath10k *ar, struct sk_buff *skb)
 
 	status = IEEE80211_SKB_RXCB(skb);
 
+	if (!(ar->filter_flags & FIF_FCSFAIL) &&
+	    status->flag & RX_FLAG_FAILED_FCS_CRC) {
+		ar->stats.rx_crc_err_drop++;
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
 	ath10k_dbg(ar, ATH10K_DBG_DATA,
 		   "rx skb %pK len %u peer %pM %s %s sn %u %s%s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%x fcs-err %i mic-err %i amsdu-more %i\n",
 		   skb,