Commit ea52c212 authored by Alexandru Tachici's avatar Alexandru Tachici Committed by Jonathan Cameron

dt-bindings: iio: dac: Add docs for AD5770R DAC

Adding dt-bindings documentation for AD5770R DAC.
Signed-off-by: default avatarMircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: default avatarAlexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent cbbb8198
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2020 Analog Devices Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/bindings/iio/dac/adi,ad5770r.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD5770R DAC device driver
maintainers:
- Mircea Caprioru <mircea.caprioru@analog.com>
description: |
Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be
found here:
https://www.analog.com/media/en/technical-documentation/data-sheets/AD5770R.pdf
properties:
compatible:
enum:
- adi,ad5770r
reg:
maxItems: 1
avdd-supply:
description:
AVdd voltage supply. Represents two different supplies in the datasheet
that are in fact the same.
iovdd-supply:
description:
Voltage supply for the chip interface.
vref-supply:
description: Specify the voltage of the external reference used.
Available reference options are 1.25 V or 2.5 V. If no
external reference declared then the device will use the
internal reference of 1.25 V.
adi,external-resistor:
description: Specify if an external 2.5k ohm resistor is used. If not
specified the device will use an internal 2.5k ohm resistor.
The precision resistor is used for reference current generation.
type: boolean
reset-gpios:
description: GPIO spec for the RESET pin. If specified, it will be
asserted during driver probe.
maxItems: 1
channel0:
description: Represents an external channel which are
connected to the DAC. Channel 0 can act both as a current
source and sink.
type: object
properties:
num:
description: This represents the channel number.
items:
const: 0
adi,range-microamp:
description: Output range of the channel.
oneOf:
- $ref: /schemas/types.yaml#/definitions/int32-array
- items:
- enum: [0 300000]
- enum: [-60000 0]
- enum: [-60000 300000]
channel1:
description: Represents an external channel which are
connected to the DAC.
type: object
properties:
num:
description: This represents the channel number.
items:
const: 1
adi,range-microamp:
description: Output range of the channel.
oneOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
- enum: [0 140000]
- enum: [0 250000]
channel2:
description: Represents an external channel which are
connected to the DAC.
type: object
properties:
num:
description: This represents the channel number.
items:
const: 2
adi,range-microamp:
description: Output range of the channel.
oneOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
- enum: [0 140000]
- enum: [0 250000]
patternProperties:
"^channel@([3-5])$":
type: object
description: Represents the external channels which are connected to the DAC.
properties:
num:
description: This represents the channel number.
items:
minimum: 3
maximum: 5
adi,range-microamp:
description: Output range of the channel.
oneOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
- enum: [0 45000]
- enum: [0 100000]
required:
- reg
- diff-channels
- channel0
- channel1
- channel2
- channel3
- channel4
- channel5
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
ad5770r@0 {
compatible = "ad5770r";
reg = <0>;
spi-max-frequency = <1000000>;
vref-supply = <&vref>;
adi,external-resistor;
reset-gpios = <&gpio 22 0>;
channel@0 {
num = <0>;
adi,range-microamp = <(-60000) 300000>;
};
channel@1 {
num = <1>;
adi,range-microamp = <0 140000>;
};
channel@2 {
num = <2>;
adi,range-microamp = <0 55000>;
};
channel@3 {
num = <3>;
adi,range-microamp = <0 45000>;
};
channel@4 {
num = <4>;
adi,range-microamp = <0 45000>;
};
channel@5 {
num = <5>;
adi,range-microamp = <0 45000>;
};
};
};
...
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment