Commit eaa2bada authored by Tony Prisk's avatar Tony Prisk

arm: vt8500: Remove gpio devicetree nodes

Remove the gpio related devicetree nodes as these are no longer required
with the move to a combined pinctrl/gpio driver.
Signed-off-by: default avatarTony Prisk <linux@prisktech.co.nz>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 649a59cf
...@@ -25,13 +25,6 @@ intc: interrupt-controller@d8140000 { ...@@ -25,13 +25,6 @@ intc: interrupt-controller@d8140000 {
#interrupt-cells = <1>; #interrupt-cells = <1>;
}; };
gpio: gpio-controller@d8110000 {
compatible = "via,vt8500-gpio";
gpio-controller;
reg = <0xd8110000 0x10000>;
#gpio-cells = <3>;
};
pinctrl: pinctrl@d8110000 { pinctrl: pinctrl@d8110000 {
compatible = "via,vt8500-pinctrl"; compatible = "via,vt8500-pinctrl";
reg = <0xd8110000 0x10000>; reg = <0xd8110000 0x10000>;
......
...@@ -40,13 +40,6 @@ intc1: interrupt-controller@d8150000 { ...@@ -40,13 +40,6 @@ intc1: interrupt-controller@d8150000 {
interrupts = <56 57 58 59 60 61 62 63>; interrupts = <56 57 58 59 60 61 62 63>;
}; };
gpio: gpio-controller@d8110000 {
compatible = "wm,wm8505-gpio";
gpio-controller;
reg = <0xd8110000 0x10000>;
#gpio-cells = <3>;
};
pinctrl: pinctrl@d8110000 { pinctrl: pinctrl@d8110000 {
compatible = "wm,wm8505-pinctrl"; compatible = "wm,wm8505-pinctrl";
reg = <0xd8110000 0x10000>; reg = <0xd8110000 0x10000>;
......
...@@ -34,13 +34,6 @@ intc1: interrupt-controller@d8150000 { ...@@ -34,13 +34,6 @@ intc1: interrupt-controller@d8150000 {
interrupts = <56 57 58 59 60 61 62 63>; interrupts = <56 57 58 59 60 61 62 63>;
}; };
gpio: gpio-controller@d8110000 {
compatible = "wm,wm8650-gpio";
gpio-controller;
reg = <0xd8110000 0x10000>;
#gpio-cells = <3>;
};
pinctrl: pinctrl@d8110000 { pinctrl: pinctrl@d8110000 {
compatible = "wm,wm8650-pinctrl"; compatible = "wm,wm8650-pinctrl";
reg = <0xd8110000 0x10000>; reg = <0xd8110000 0x10000>;
......
...@@ -41,13 +41,6 @@ intc1: interrupt-controller@d8150000 { ...@@ -41,13 +41,6 @@ intc1: interrupt-controller@d8150000 {
interrupts = <56 57 58 59 60 61 62 63>; interrupts = <56 57 58 59 60 61 62 63>;
}; };
gpio: gpio-controller@d8110000 {
compatible = "wm,wm8650-gpio";
gpio-controller;
reg = <0xd8110000 0x10000>;
#gpio-cells = <3>;
};
pinctrl: pinctrl@d8110000 { pinctrl: pinctrl@d8110000 {
compatible = "wm,wm8850-pinctrl"; compatible = "wm,wm8850-pinctrl";
reg = <0xd8110000 0x10000>; reg = <0xd8110000 0x10000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment