iio: adc: at91_adc: remove platform data and move defs in driver file

The AT91 ADC driver no longer uses the 'at91_add_device_adc' platform data
type. This is no longer used (at least in mainline boards).

This change removes the platform-data initialization from the driver, since
it is mostly dead code now.

Some definitions [from the platform data at91_adc.h include] have been
moved in the driver, since they are needed in the driver.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200930135048.11530-5-alexandru.ardelean@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/adc/at91_adc.c

@@ -22,8 +22,6 @@
 #include <linux/slab.h>
 #include <linux/wait.h>
 
-#include <linux/platform_data/at91_adc.h>
-
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/trigger.h>
@@ -153,6 +151,25 @@
 #define TOUCH_SHTIM                    0xa
 #define TOUCH_SCTIM_US		10		/* 10us for the Touchscreen Switches Closure Time */
 
+enum atmel_adc_ts_type {
+	ATMEL_ADC_TOUCHSCREEN_NONE = 0,
+	ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
+	ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
+};
+
+/**
+ * struct at91_adc_trigger - description of triggers
+ * @name:		name of the trigger advertised to the user
+ * @value:		value to set in the ADC's trigger setup register
+ *			to enable the trigger
+ * @is_external:	Does the trigger rely on an external pin?
+ */
+struct at91_adc_trigger {
+	const char	*name;
+	u8		value;
+	bool		is_external;
+};
+
 /**
  * struct at91_adc_reg_desc - Various informations relative to registers
  * @channel_base:	Base offset for the channel data registers
@@ -873,9 +890,6 @@ static int at91_adc_probe_dt(struct iio_dev *idev,
 	int i = 0, ret;
 	u32 prop;
 
-	if (!node)
-		return -EINVAL;
-
 	st->caps = of_device_get_match_data(&pdev->dev);
 
 	st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers");
@@ -957,30 +971,6 @@ static int at91_adc_probe_dt(struct iio_dev *idev,
 	return ret;
 }
 
-static int at91_adc_probe_pdata(struct at91_adc_state *st,
-				struct platform_device *pdev)
-{
-	struct at91_adc_data *pdata = pdev->dev.platform_data;
-
-	if (!pdata)
-		return -EINVAL;
-
-	st->caps = (struct at91_adc_caps *)
-			platform_get_device_id(pdev)->driver_data;
-
-	st->use_external = pdata->use_external_triggers;
-	st->vref_mv = pdata->vref;
-	st->channels_mask = pdata->channels_used;
-	st->num_channels = st->caps->num_channels;
-	st->startup_time = pdata->startup_time;
-	st->trigger_number = pdata->trigger_number;
-	st->trigger_list = pdata->trigger_list;
-	st->registers = &st->caps->registers;
-	st->touchscreen_type = pdata->touchscreen_type;
-
-	return 0;
-}
-
 static const struct iio_info at91_adc_info = {
 	.read_raw = &at91_adc_read_raw,
 };
@@ -1157,15 +1147,9 @@ static int at91_adc_probe(struct platform_device *pdev)
 
 	st = iio_priv(idev);
 
-	if (pdev->dev.of_node)
-		ret = at91_adc_probe_dt(idev, pdev);
-	else
-		ret = at91_adc_probe_pdata(st, pdev);
-
-	if (ret) {
-		dev_err(&pdev->dev, "No platform data available.\n");
-		return -EINVAL;
-	}
+	ret = at91_adc_probe_dt(idev, pdev);
+	if (ret)
+		return ret;
 
 	platform_set_drvdata(pdev, idev);
 

include/linux/platform_data/at91_adc.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2011 Free Electrons
- */
-
-#ifndef _AT91_ADC_H_
-#define _AT91_ADC_H_
-
-enum atmel_adc_ts_type {
-	ATMEL_ADC_TOUCHSCREEN_NONE = 0,
-	ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
-	ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
-};
-
-/**
- * struct at91_adc_trigger - description of triggers
- * @name:		name of the trigger advertised to the user
- * @value:		value to set in the ADC's trigger setup register
-			to enable the trigger
- * @is_external:	Does the trigger rely on an external pin?
- */
-struct at91_adc_trigger {
-	const char	*name;
-	u8		value;
-	bool		is_external;
-};
-
-/**
- * struct at91_adc_data - platform data for ADC driver
- * @channels_used:		channels in use on the board as a bitmask
- * @startup_time:		startup time of the ADC in microseconds
- * @trigger_list:		Triggers available in the ADC
- * @trigger_number:		Number of triggers available in the ADC
- * @use_external_triggers:	does the board has external triggers availables
- * @vref:			Reference voltage for the ADC in millivolts
- * @touchscreen_type:		If a touchscreen is connected, its type (4 or 5 wires)
- */
-struct at91_adc_data {
-	unsigned long			channels_used;
-	u8				startup_time;
-	struct at91_adc_trigger		*trigger_list;
-	u8				trigger_number;
-	bool				use_external_triggers;
-	u16				vref;
-	enum atmel_adc_ts_type		touchscreen_type;
-};
-
-extern void __init at91_add_device_adc(struct at91_adc_data *data);
-#endif