Merge phase #4 (X2APIC, APIC unification, CPU identification unification) of...

Merge phase #4 (X2APIC, APIC unification, CPU identification unification) of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-v28-for-linus-phase4-D' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (186 commits)
  x86, debug: print more information about unknown CPUs
  x86 setup: handle more than 8 CPU flag words
  x86: cpuid, fix typo
  x86: move transmeta cap read to early_init_transmeta()
  x86: identify_cpu_without_cpuid v2
  x86: extended "flags" to show virtualization HW feature in /proc/cpuinfo
  x86: move VMX MSRs to msr-index.h
  x86: centaur_64.c remove duplicated setting of CONSTANT_TSC
  x86: intel.c put workaround for old cpus together
  x86: let intel 64-bit use intel.c
  x86: make intel_64.c the same as intel.c
  x86: make intel.c have 64-bit support code
  x86: little clean up of intel.c/intel_64.c
  x86: make 64 bit to use amd.c
  x86: make amd_64 have 32 bit code
  x86: make amd.c have 64bit support code
  x86: merge header in amd_64.c
  x86: add srat_detect_node for amd64
  x86: remove duplicated force_mwait
  x86: cpu make amd.c more like amd_64.c v2
  ...

Documentation/kernel-parameters.txt

@@ -1428,6 +1428,12 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.
 
+	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
+
+	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of
+			default x2apic cluster mode on platforms
+			supporting x2apic.
+
 	noltlbs		[PPC] Do not use large page/tlb entries for kernel
 			lowmem mapping on PPC40x.
 

arch/um/sys-x86_64/syscall_table.c

@@ -41,12 +41,12 @@
 #define stub_rt_sigreturn sys_rt_sigreturn
 
 #define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
 #include <asm-x86/unistd_64.h>
 
 #undef __SYSCALL
 #define __SYSCALL(nr, sym) [ nr ] = sym,
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
 
 typedef void (*sys_call_ptr_t)(void);
 

arch/x86/Kconfig

@@ -1689,6 +1689,14 @@ config DMAR_FLOPPY_WA
 	 workaround will setup a 1:1 mapping for the first
 	 16M to make floppy (an ISA device) work.
 
+config INTR_REMAP
+	bool "Support for Interrupt Remapping (EXPERIMENTAL)"
+	depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
+	help
+	 Supports Interrupt remapping for IO-APIC and MSI devices.
+	 To use x2apic mode in the CPU's which support x2APIC enhancements or
+	 to support platforms with CPU's having > 8 bit APIC ID, say Y.
+
 source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pci/Kconfig"

arch/x86/Kconfig.cpu

@@ -419,6 +419,60 @@ config X86_DEBUGCTLMSR
 	def_bool y
 	depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
 
+menuconfig PROCESSOR_SELECT
+	default y
+	bool "Supported processor vendors" if EMBEDDED
+	help
+	  This lets you choose what x86 vendor support code your kernel
+	  will include.
+
+config CPU_SUP_INTEL
+	default y
+	bool "Support Intel processors" if PROCESSOR_SELECT
+	help
+	  This enables extended support for Intel processors
+
+config CPU_SUP_CYRIX_32
+	default y
+	bool "Support Cyrix processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables extended support for Cyrix processors
+
+config CPU_SUP_AMD
+	default y
+	bool "Support AMD processors" if PROCESSOR_SELECT
+	help
+	  This enables extended support for AMD processors
+
+config CPU_SUP_CENTAUR_32
+	default y
+	bool "Support Centaur processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables extended support for Centaur processors
+
+config CPU_SUP_CENTAUR_64
+	default y
+	bool "Support Centaur processors" if PROCESSOR_SELECT
+	depends on 64BIT
+	help
+	  This enables extended support for Centaur processors
+
+config CPU_SUP_TRANSMETA_32
+	default y
+	bool "Support Transmeta processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables extended support for Transmeta processors
+
+config CPU_SUP_UMC_32
+	default y
+	bool "Support UMC processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables extended support for UMC processors
+
 config X86_DS
 	bool "Debug Store support"
 	default y

arch/x86/boot/cpu.c

@@ -59,17 +59,18 @@ int validate_cpu(void)
 			u32 e = err_flags[i];
 
 			for (j = 0; j < 32; j++) {
-				int n = (i << 5)+j;
-				if (*msg_strs < n) {
+				if (msg_strs[0] < i ||
+				    (msg_strs[0] == i && msg_strs[1] < j)) {
 					/* Skip to the next string */
-					do {
-						msg_strs++;
-					} while (*msg_strs);
-					msg_strs++;
+					msg_strs += 2;
+					while (*msg_strs++)
+						;
 				}
 				if (e & 1) {
-					if (*msg_strs == n && msg_strs[1])
-						printf("%s ", msg_strs+1);
+					if (msg_strs[0] == i &&
+					    msg_strs[1] == j &&
+					    msg_strs[2])
+						printf("%s ", msg_strs+2);
 					else
 						printf("%d:%d ", i, j);
 				}

arch/x86/boot/mkcpustr.c

@@ -15,33 +15,33 @@
 
 #include <stdio.h>
 
-#include "../kernel/cpu/feature_names.c"
-
-#if NCAPFLAGS > 8
-# error "Need to adjust the boot code handling of CPUID strings"
-#endif
+#include "../kernel/cpu/capflags.c"
 
 int main(void)
 {
-	int i;
+	int i, j;
 	const char *str;
 
 	printf("static const char x86_cap_strs[] = \n");
 
-	for (i = 0; i < NCAPINTS*32; i++) {
-		str = x86_cap_flags[i];
-
-		if (i == NCAPINTS*32-1) {
-			/* The last entry must be unconditional; this
-			   also consumes the compiler-added null character */
-			if (!str)
-				str = "";
-			printf("\t\"\\x%02x\"\"%s\"\n", i, str);
-		} else if (str) {
-			printf("#if REQUIRED_MASK%d & (1 << %d)\n"
-			       "\t\"\\x%02x\"\"%s\\0\"\n"
-			       "#endif\n",
-			       i >> 5, i & 31, i, str);
+	for (i = 0; i < NCAPINTS; i++) {
+		for (j = 0; j < 32; j++) {
+			str = x86_cap_flags[i*32+j];
+
+			if (i == NCAPINTS-1 && j == 31) {
+				/* The last entry must be unconditional; this
+				   also consumes the compiler-added null
+				   character */
+				if (!str)
+					str = "";
+				printf("\t\"\\x%02x\\x%02x\"\"%s\"\n",
+				       i, j, str);
+			} else if (str) {
+				printf("#if REQUIRED_MASK%d & (1 << %d)\n"
+				       "\t\"\\x%02x\\x%02x\"\"%s\\0\"\n"
+				       "#endif\n",
+				       i, j, i, j, str);
+			}
 		}
 	}
 	printf("\t;\n");

arch/x86/ia32/ia32_signal.c

@@ -179,9 +179,10 @@ struct sigframe
 	u32 pretcode;
 	int sig;
 	struct sigcontext_ia32 sc;
-	struct _fpstate_ia32 fpstate;
+	struct _fpstate_ia32 fpstate_unused; /* look at kernel/sigframe.h */
 	unsigned int extramask[_COMPAT_NSIG_WORDS-1];
 	char retcode[8];
+	/* fp state follows here */
 };
 
 struct rt_sigframe
@@ -192,8 +193,8 @@ struct rt_sigframe
 	u32 puc;
 	compat_siginfo_t info;
 	struct ucontext_ia32 uc;
-	struct _fpstate_ia32 fpstate;
 	char retcode[8];
+	/* fp state follows here */
 };
 
 #define COPY(x)		{ 		\
@@ -215,7 +216,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 				   unsigned int *peax)
 {
 	unsigned int tmpflags, gs, oldgs, err = 0;
-	struct _fpstate_ia32 __user *buf;
+	void __user *buf;
 	u32 tmp;
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -259,26 +260,12 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 
 	err |= __get_user(tmp, &sc->fpstate);
 	buf = compat_ptr(tmp);
-	if (buf) {
-		if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
-			goto badframe;
-		err |= restore_i387_ia32(buf);
-	} else {
-		struct task_struct *me = current;
-
-		if (used_math()) {
-			clear_fpu(me);
-			clear_used_math();
-		}
-	}
+	err |= restore_i387_xstate_ia32(buf);
 
 	err |= __get_user(tmp, &sc->ax);
 	*peax = tmp;
 
 	return err;
-
-badframe:
-	return 1;
 }
 
 asmlinkage long sys32_sigreturn(struct pt_regs *regs)
@@ -350,7 +337,7 @@ asmlinkage long sys32_rt_sigreturn(struct pt_regs *regs)
  */
 
 static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
-				 struct _fpstate_ia32 __user *fpstate,
+				 void __user *fpstate,
 				 struct pt_regs *regs, unsigned int mask)
 {
 	int tmp, err = 0;
@@ -380,7 +367,7 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
 	err |= __put_user((u32)regs->flags, &sc->flags);
 	err |= __put_user((u32)regs->sp, &sc->sp_at_signal);
 
-	tmp = save_i387_ia32(fpstate);
+	tmp = save_i387_xstate_ia32(fpstate);
 	if (tmp < 0)
 		err = -EFAULT;
 	else {
@@ -401,7 +388,8 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
  * Determine which stack to use..
  */
 static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
-				 size_t frame_size)
+				 size_t frame_size,
+				 void **fpstate)
 {
 	unsigned long sp;
 
@@ -420,6 +408,11 @@ static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 		 ka->sa.sa_restorer)
 		sp = (unsigned long) ka->sa.sa_restorer;
 
+	if (used_math()) {
+		sp = sp - sig_xstate_ia32_size;
+		*fpstate = (struct _fpstate_ia32 *) sp;
+	}
+
 	sp -= frame_size;
 	/* Align the stack pointer according to the i386 ABI,
 	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
@@ -433,6 +426,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 	struct sigframe __user *frame;
 	void __user *restorer;
 	int err = 0;
+	void __user *fpstate = NULL;
 
 	/* copy_to_user optimizes that into a single 8 byte store */
 	static const struct {
@@ -447,7 +441,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 		0,
 	};
 
-	frame = get_sigframe(ka, regs, sizeof(*frame));
+	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		goto give_sigsegv;
@@ -456,8 +450,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 	if (err)
 		goto give_sigsegv;
 
-	err |= ia32_setup_sigcontext(&frame->sc, &frame->fpstate, regs,
-					set->sig[0]);
+	err |= ia32_setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]);
 	if (err)
 		goto give_sigsegv;
 
@@ -521,6 +514,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	struct rt_sigframe __user *frame;
 	void __user *restorer;
 	int err = 0;
+	void __user *fpstate = NULL;
 
 	/* __copy_to_user optimizes that into a single 8 byte store */
 	static const struct {
@@ -536,7 +530,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		0,
 	};
 
-	frame = get_sigframe(ka, regs, sizeof(*frame));
+	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		goto give_sigsegv;
@@ -549,13 +543,16 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		goto give_sigsegv;
 
 	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
+	if (cpu_has_xsave)
+		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
+	else
+		err |= __put_user(0, &frame->uc.uc_flags);
 	err |= __put_user(0, &frame->uc.uc_link);
 	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->sp),
 			  &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
+	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
 				     regs, set->sig[0]);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)

arch/x86/kernel/Makefile

@@ -38,7 +38,7 @@ obj-y			+= tsc.o io_delay.o rtc.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
 obj-y				+= process.o
-obj-y				+= i387.o
+obj-y				+= i387.o xsave.o
 obj-y				+= ptrace.o
 obj-y				+= ds.o
 obj-$(CONFIG_X86_32)		+= tls.o
@@ -69,6 +69,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
+obj-$(CONFIG_X86_ES7000)	+= es7000_32.o
 obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
 obj-y				+= vsmp_64.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
@@ -104,6 +105,8 @@ obj-$(CONFIG_OLPC)		+= olpc.o
 ifeq ($(CONFIG_X86_64),y)
         obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
 	obj-y				+= bios_uv.o
+        obj-y				+= genx2apic_cluster.o
+        obj-y				+= genx2apic_phys.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 

arch/x86/kernel/acpi/boot.c

@@ -252,10 +252,8 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled)
 		return;
 	}
 
-#ifdef CONFIG_X86_32
 	if (boot_cpu_physical_apicid != -1U)
 		ver = apic_version[boot_cpu_physical_apicid];
-#endif
 
 	generic_processor_info(id, ver);
 }
@@ -774,11 +772,9 @@ static void __init acpi_register_lapic_address(unsigned long address)
 
 	set_fixmap_nocache(FIX_APIC_BASE, address);
 	if (boot_cpu_physical_apicid == -1U) {
-		boot_cpu_physical_apicid  = GET_APIC_ID(read_apic_id());
-#ifdef CONFIG_X86_32
+		boot_cpu_physical_apicid  = read_apic_id();
 		apic_version[boot_cpu_physical_apicid] =
 			 GET_APIC_VERSION(apic_read(APIC_LVR));
-#endif
 	}
 }
 
@@ -1350,7 +1346,9 @@ static void __init acpi_process_madt(void)
 				acpi_ioapic = 1;
 
 				smp_found_config = 1;
+#ifdef CONFIG_X86_32
 				setup_apic_routing();
+#endif
 			}
 		}
 		if (error == -EINVAL) {

arch/x86/kernel/cpu/Makefile

@@ -3,22 +3,30 @@
 #
 
 obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
-obj-y			+= proc.o feature_names.o
-
-obj-$(CONFIG_X86_32)	+= common.o bugs.o
-obj-$(CONFIG_X86_64)	+= common_64.o bugs_64.o
-obj-$(CONFIG_X86_32)	+= amd.o
-obj-$(CONFIG_X86_64)	+= amd_64.o
-obj-$(CONFIG_X86_32)	+= cyrix.o
-obj-$(CONFIG_X86_32)	+= centaur.o
-obj-$(CONFIG_X86_64)	+= centaur_64.o
-obj-$(CONFIG_X86_32)	+= transmeta.o
-obj-$(CONFIG_X86_32)	+= intel.o
-obj-$(CONFIG_X86_64)	+= intel_64.o
-obj-$(CONFIG_X86_32)	+= umc.o
+obj-y			+= proc.o capflags.o powerflags.o common.o
+
+obj-$(CONFIG_X86_32)	+= bugs.o cmpxchg.o
+obj-$(CONFIG_X86_64)	+= bugs_64.o
+
+obj-$(CONFIG_CPU_SUP_INTEL)		+= intel.o
+obj-$(CONFIG_CPU_SUP_AMD)		+= amd.o
+obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix.o
+obj-$(CONFIG_CPU_SUP_CENTAUR_32)	+= centaur.o
+obj-$(CONFIG_CPU_SUP_CENTAUR_64)	+= centaur_64.o
+obj-$(CONFIG_CPU_SUP_TRANSMETA_32)	+= transmeta.o
+obj-$(CONFIG_CPU_SUP_UMC_32)		+= umc.o
 
 obj-$(CONFIG_X86_MCE)	+= mcheck/
 obj-$(CONFIG_MTRR)	+= mtrr/
 obj-$(CONFIG_CPU_FREQ)	+= cpufreq/
 
 obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o
+
+quiet_cmd_mkcapflags = MKCAP   $@
+      cmd_mkcapflags = $(PERL) $(srctree)/$(src)/mkcapflags.pl $< $@
+
+cpufeature = $(src)/../../../../include/asm-x86/cpufeature.h
+
+targets += capflags.c
+$(obj)/capflags.c: $(cpufeature) $(src)/mkcapflags.pl FORCE
+	$(call if_changed,mkcapflags)

arch/x86/kernel/cpu/addon_cpuid_features.c

@@ -7,6 +7,8 @@
 #include <asm/pat.h>
 #include <asm/processor.h>
 
+#include <mach_apic.h>
+
 struct cpuid_bit {
 	u16 feature;
 	u8 reg;
@@ -48,6 +50,92 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 	}
 }
 
+/* leaf 0xb SMT level */
+#define SMT_LEVEL	0
+
+/* leaf 0xb sub-leaf types */
+#define INVALID_TYPE	0
+#define SMT_TYPE	1
+#define CORE_TYPE	2
+
+#define LEAFB_SUBTYPE(ecx)		(((ecx) >> 8) & 0xff)
+#define BITS_SHIFT_NEXT_LEVEL(eax)	((eax) & 0x1f)
+#define LEVEL_MAX_SIBLINGS(ebx)		((ebx) & 0xffff)
+
+/*
+ * Check for extended topology enumeration cpuid leaf 0xb and if it
+ * exists, use it for populating initial_apicid and cpu topology
+ * detection.
+ */
+void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+	unsigned int eax, ebx, ecx, edx, sub_index;
+	unsigned int ht_mask_width, core_plus_mask_width;
+	unsigned int core_select_mask, core_level_siblings;
+
+	if (c->cpuid_level < 0xb)
+		return;
+
+	cpuid_count(0xb, SMT_LEVEL, &eax, &ebx, &ecx, &edx);
+
+	/*
+	 * check if the cpuid leaf 0xb is actually implemented.
+	 */
+	if (ebx == 0 || (LEAFB_SUBTYPE(ecx) != SMT_TYPE))
+		return;
+
+	set_cpu_cap(c, X86_FEATURE_XTOPOLOGY);
+
+	/*
+	 * initial apic id, which also represents 32-bit extended x2apic id.
+	 */
+	c->initial_apicid = edx;
+
+	/*
+	 * Populate HT related information from sub-leaf level 0.
+	 */
+	core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx);
+	core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
+
+	sub_index = 1;
+	do {
+		cpuid_count(0xb, sub_index, &eax, &ebx, &ecx, &edx);
+
+		/*
+		 * Check for the Core type in the implemented sub leaves.
+		 */
+		if (LEAFB_SUBTYPE(ecx) == CORE_TYPE) {
+			core_level_siblings = LEVEL_MAX_SIBLINGS(ebx);
+			core_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
+			break;
+		}
+
+		sub_index++;
+	} while (LEAFB_SUBTYPE(ecx) != INVALID_TYPE);
+
+	core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width;
+
+#ifdef CONFIG_X86_32
+	c->cpu_core_id = phys_pkg_id(c->initial_apicid, ht_mask_width)
+						 & core_select_mask;
+	c->phys_proc_id = phys_pkg_id(c->initial_apicid, core_plus_mask_width);
+#else
+	c->cpu_core_id = phys_pkg_id(ht_mask_width) & core_select_mask;
+	c->phys_proc_id = phys_pkg_id(core_plus_mask_width);
+#endif
+	c->x86_max_cores = (core_level_siblings / smp_num_siblings);
+
+
+	printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+	       c->phys_proc_id);
+	if (c->x86_max_cores > 1)
+		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
+		       c->cpu_core_id);
+	return;
+#endif
+}
+
 #ifdef CONFIG_X86_PAT
 void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
 {

arch/x86/kernel/cpu/amd_64.c

-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/numa_64.h>
-#include <asm/mmconfig.h>
-#include <asm/cacheflush.h>
-
-#include <mach_apic.h>
-
-#include "cpu.h"
-
-int force_mwait __cpuinitdata;
-
-#ifdef CONFIG_NUMA
-static int __cpuinit nearby_node(int apicid)
-{
-	int i, node;
-
-	for (i = apicid - 1; i >= 0; i--) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	return first_node(node_online_map); /* Shouldn't happen */
-}
-#endif
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
- * Assumes number of cores is a power of two.
- */
-static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned bits;
-#ifdef CONFIG_NUMA
-	int cpu = smp_processor_id();
-	int node = 0;
-	unsigned apicid = hard_smp_processor_id();
-#endif
-	bits = c->x86_coreid_bits;
-
-	/* Low order bits define the core id (index of core in socket) */
-	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
-	/* Convert the initial APIC ID into the socket ID */
-	c->phys_proc_id = c->initial_apicid >> bits;
-
-#ifdef CONFIG_NUMA
-	node = c->phys_proc_id;
-	if (apicid_to_node[apicid] != NUMA_NO_NODE)
-		node = apicid_to_node[apicid];
-	if (!node_online(node)) {
-		/* Two possibilities here:
-		   - The CPU is missing memory and no node was created.
-		   In that case try picking one from a nearby CPU
-		   - The APIC IDs differ from the HyperTransport node IDs
-		   which the K8 northbridge parsing fills in.
-		   Assume they are all increased by a constant offset,
-		   but in the same order as the HT nodeids.
-		   If that doesn't result in a usable node fall back to the
-		   path for the previous case.  */
-
-		int ht_nodeid = c->initial_apicid;
-
-		if (ht_nodeid >= 0 &&
-		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
-			node = apicid_to_node[ht_nodeid];
-		/* Pick a nearby node */
-		if (!node_online(node))
-			node = nearby_node(apicid);
-	}
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-#endif
-}
-
-static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned bits, ecx;
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level < 0x80000008)
-		return;
-
-	ecx = cpuid_ecx(0x80000008);
-
-	c->x86_max_cores = (ecx & 0xff) + 1;
-
-	/* CPU telling us the core id bits shift? */
-	bits = (ecx >> 12) & 0xF;
-
-	/* Otherwise recompute */
-	if (bits == 0) {
-		while ((1 << bits) < c->x86_max_cores)
-			bits++;
-	}
-
-	c->x86_coreid_bits = bits;
-
-#endif
-}
-
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
-{
-	early_init_amd_mc(c);
-
-	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
-	if (c->x86_power & (1<<8))
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-
-	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
-}
-
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
-{
-	unsigned level;
-
-#ifdef CONFIG_SMP
-	unsigned long value;
-
-	/*
-	 * Disable TLB flush filter by setting HWCR.FFDIS on K8
-	 * bit 6 of msr C001_0015
-	 *
-	 * Errata 63 for SH-B3 steppings
-	 * Errata 122 for all steppings (F+ have it disabled by default)
-	 */
-	if (c->x86 == 0xf) {
-		rdmsrl(MSR_K8_HWCR, value);
-		value |= 1 << 6;
-		wrmsrl(MSR_K8_HWCR, value);
-	}
-#endif
-
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_cpu_cap(c, 0*32+31);
-
-	/* On C+ stepping K8 rep microcode works well for copy/memset */
-	if (c->x86 == 0xf) {
-		level = cpuid_eax(1);
-		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
-			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	}
-	if (c->x86 == 0x10 || c->x86 == 0x11)
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-
-	/* Enable workaround for FXSAVE leak */
-	if (c->x86 >= 6)
-		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
-
-	level = get_model_name(c);
-	if (!level) {
-		switch (c->x86) {
-		case 0xf:
-			/* Should distinguish Models here, but this is only
-			   a fallback anyways. */
-			strcpy(c->x86_model_id, "Hammer");
-			break;
-		}
-	}
-	display_cacheinfo(c);
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level >= 0x80000008)
-		amd_detect_cmp(c);
-
-	if (c->extended_cpuid_level >= 0x80000006 &&
-		(cpuid_edx(0x80000006) & 0xf000))
-		num_cache_leaves = 4;
-	else
-		num_cache_leaves = 3;
-
-	if (c->x86 >= 0xf && c->x86 <= 0x11)
-		set_cpu_cap(c, X86_FEATURE_K8);
-
-	/* MFENCE stops RDTSC speculation */
-	set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
-
-	if (c->x86 == 0x10) {
-		/* do this for boot cpu */
-		if (c == &boot_cpu_data)
-			check_enable_amd_mmconf_dmi();
-
-		fam10h_check_enable_mmcfg();
-	}
-
-	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
-		unsigned long long tseg;
-
-		/*
-		 * Split up direct mapping around the TSEG SMM area.
-		 * Don't do it for gbpages because there seems very little
-		 * benefit in doing so.
-		 */
-		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
-		    printk(KERN_DEBUG "tseg: %010llx\n", tseg);
-		    if ((tseg>>PMD_SHIFT) <
-				(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
-			((tseg>>PMD_SHIFT) <
-				(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
-			 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
-			set_memory_4k((unsigned long)__va(tseg), 1);
-		}
-	}
-}
-
-static struct cpu_dev amd_cpu_dev __cpuinitdata = {
-	.c_vendor	= "AMD",
-	.c_ident	= { "AuthenticAMD" },
-	.c_early_init   = early_init_amd,
-	.c_init		= init_amd,
-};
-
-cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
-

arch/x86/kernel/cpu/centaur.c

@@ -289,7 +289,6 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 	if (c->x86_model >= 6 && c->x86_model < 9)
 		set_cpu_cap(c, X86_FEATURE_3DNOW);
 
-	get_model_name(c);
 	display_cacheinfo(c);
 }
 
@@ -475,6 +474,7 @@ static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
 	.c_size_cache	= centaur_size_cache,
+	.c_x86_vendor	= X86_VENDOR_CENTAUR,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_CENTAUR, &centaur_cpu_dev);
+cpu_dev_register(centaur_cpu_dev);

arch/x86/kernel/cpu/centaur_64.c

@@ -16,9 +16,10 @@ static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
 
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 {
+	early_init_centaur(c);
+
 	if (c->x86 == 0x6 && c->x86_model >= 0xf) {
 		c->x86_cache_alignment = c->x86_clflush_size * 2;
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 	}
 	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
@@ -29,7 +30,8 @@ static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_ident	= { "CentaurHauls" },
 	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
+	.c_x86_vendor	= X86_VENDOR_CENTAUR,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_CENTAUR, &centaur_cpu_dev);
+cpu_dev_register(centaur_cpu_dev);
 

arch/x86/kernel/cpu/cmpxchg.c

+/*
+ * cmpxchg*() fallbacks for CPU not supporting these instructions
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+
+#ifndef CONFIG_X86_CMPXCHG
+unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
+{
+	u8 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u8 *)ptr;
+	if (prev == old)
+		*(u8 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u8);
+
+unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new)
+{
+	u16 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u16 *)ptr;
+	if (prev == old)
+		*(u16 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u16);
+
+unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
+{
+	u32 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u32 *)ptr;
+	if (prev == old)
+		*(u32 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u32);
+#endif
+
+#ifndef CONFIG_X86_CMPXCHG64
+unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
+{
+	u64 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u64 *)ptr;
+	if (prev == old)
+		*(u64 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_486_u64);
+#endif
+

arch/x86/kernel/cpu/cpu.h

@@ -21,23 +21,16 @@ struct cpu_dev {
 	void		(*c_init)(struct cpuinfo_x86 * c);
 	void		(*c_identify)(struct cpuinfo_x86 * c);
 	unsigned int	(*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size);
+	int	c_x86_vendor;
 };
 
-extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
+#define cpu_dev_register(cpu_devX) \
+	static struct cpu_dev *__cpu_dev_##cpu_devX __used \
+	__attribute__((__section__(".x86_cpu_dev.init"))) = \
+	&cpu_devX;
 
-struct cpu_vendor_dev {
-	int vendor;
-	struct cpu_dev *cpu_dev;
-};
-
-#define cpu_vendor_dev_register(cpu_vendor_id, cpu_dev) \
-	static struct cpu_vendor_dev __cpu_vendor_dev_##cpu_vendor_id __used \
-	__attribute__((__section__(".x86cpuvendor.init"))) = \
-	{ cpu_vendor_id, cpu_dev }
-
-extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[];
+extern struct cpu_dev *__x86_cpu_dev_start[], *__x86_cpu_dev_end[];
 
-extern int get_model_name(struct cpuinfo_x86 *c);
 extern void display_cacheinfo(struct cpuinfo_x86 *c);
 
 #endif

arch/x86/kernel/cpu/cyrix.c

@@ -121,7 +121,7 @@ static void __cpuinit set_cx86_reorder(void)
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
 
 	/* Load/Store Serialize to mem access disable (=reorder it) */
-	setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
+	setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80);
 	/* set load/store serialize from 1GB to 4GB */
 	ccr3 |= 0xe0;
 	setCx86(CX86_CCR3, ccr3);
@@ -132,11 +132,11 @@ static void __cpuinit set_cx86_memwb(void)
 	printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
 
 	/* CCR2 bit 2: unlock NW bit */
-	setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
+	setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04);
 	/* set 'Not Write-through' */
 	write_cr0(read_cr0() | X86_CR0_NW);
 	/* CCR2 bit 2: lock NW bit and set WT1 */
-	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
+	setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14);
 }
 
 /*
@@ -150,14 +150,14 @@ static void __cpuinit geode_configure(void)
 	local_irq_save(flags);
 
 	/* Suspend on halt power saving and enable #SUSP pin */
-	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+	setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88);
 
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);	/* enable MAPEN */
 
 
 	/* FPU fast, DTE cache, Mem bypass */
-	setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
+	setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38);
 	setCx86(CX86_CCR3, ccr3);			/* disable MAPEN */
 
 	set_cx86_memwb();
@@ -291,7 +291,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 		/* GXm supports extended cpuid levels 'ala' AMD */
 		if (c->cpuid_level == 2) {
 			/* Enable cxMMX extensions (GX1 Datasheet 54) */
-			setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
+			setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1);
 
 			/*
 			 * GXm : 0x30 ... 0x5f GXm  datasheet 51
@@ -301,7 +301,6 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 			 */
 			if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f))
 				geode_configure();
-			get_model_name(c);  /* get CPU marketing name */
 			return;
 		} else { /* MediaGX */
 			Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
@@ -314,7 +313,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 		if (dir1 > 7) {
 			dir0_msn++;  /* M II */
 			/* Enable MMX extensions (App note 108) */
-			setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+			setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1);
 		} else {
 			c->coma_bug = 1;      /* 6x86MX, it has the bug. */
 		}
@@ -429,7 +428,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 			local_irq_save(flags);
 			ccr3 = getCx86(CX86_CCR3);
 			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);       /* enable MAPEN  */
-			setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80);  /* enable cpuid  */
+			setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);  /* enable cpuid  */
 			setCx86(CX86_CCR3, ccr3);                       /* disable MAPEN */
 			local_irq_restore(flags);
 		}
@@ -442,14 +441,16 @@ static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
 	.c_early_init	= early_init_cyrix,
 	.c_init		= init_cyrix,
 	.c_identify	= cyrix_identify,
+	.c_x86_vendor	= X86_VENDOR_CYRIX,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev);
+cpu_dev_register(cyrix_cpu_dev);
 
 static struct cpu_dev nsc_cpu_dev __cpuinitdata = {
 	.c_vendor	= "NSC",
 	.c_ident	= { "Geode by NSC" },
 	.c_init		= init_nsc,
+	.c_x86_vendor	= X86_VENDOR_NSC,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev);
+cpu_dev_register(nsc_cpu_dev);

arch/x86/kernel/cpu/feature_names.c

-/*
- * Strings for the various x86 capability flags.
- *
- * This file must not contain any executable code.
- */
-
-#include <asm/cpufeature.h>
-
-/*
- * These flag bits must match the definitions in <asm/cpufeature.h>.
- * NULL means this bit is undefined or reserved; either way it doesn't
- * have meaning as far as Linux is concerned.  Note that it's important
- * to realize there is a difference between this table and CPUID -- if
- * applications want to get the raw CPUID data, they should access
- * /dev/cpu/<cpu_nr>/cpuid instead.
- */
-const char * const x86_cap_flags[NCAPINTS*32] = {
-	/* Intel-defined */
-	"fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
-	"cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
-	"pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
-	"fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
-
-	/* AMD-defined */
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
-	NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
-	"3dnowext", "3dnow",
-
-	/* Transmeta-defined */
-	"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* Other (Linux-defined) */
-	"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
-	NULL, NULL, NULL, NULL,
-	"constant_tsc", "up", NULL, "arch_perfmon",
-	"pebs", "bts", NULL, NULL,
-	"rep_good", NULL, NULL, NULL,
-	"nopl", NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* Intel-defined (#2) */
-	"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
-	"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
-	NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* VIA/Cyrix/Centaur-defined */
-	NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
-	"ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* AMD-defined (#2) */
-	"lahf_lm", "cmp_legacy", "svm", "extapic",
-	"cr8_legacy", "abm", "sse4a", "misalignsse",
-	"3dnowprefetch", "osvw", "ibs", "sse5",
-	"skinit", "wdt", NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* Auxiliary (Linux-defined) */
-	"ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-};
-
-const char *const x86_power_flags[32] = {
-	"ts",	/* temperature sensor */
-	"fid",  /* frequency id control */
-	"vid",  /* voltage id control */
-	"ttp",  /* thermal trip */
-	"tm",
-	"stc",
-	"100mhzsteps",
-	"hwpstate",
-	"",	/* tsc invariant mapped to constant_tsc */
-		/* nothing */
-};

arch/x86/kernel/cpu/intel_64.c

-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/processor.h>
-#include <asm/ptrace.h>
-#include <asm/topology.h>
-#include <asm/numa_64.h>
-
-#include "cpu.h"
-
-static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
-{
-	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
-	    (c->x86 == 0x6 && c->x86_model >= 0x0e))
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-
-	set_cpu_cap(c, X86_FEATURE_SYSENTER32);
-}
-
-/*
- * find out the number of processor cores on the die
- */
-static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
-{
-	unsigned int eax, t;
-
-	if (c->cpuid_level < 4)
-		return 1;
-
-	cpuid_count(4, 0, &eax, &t, &t, &t);
-
-	if (eax & 0x1f)
-		return ((eax >> 26) + 1);
-	else
-		return 1;
-}
-
-static void __cpuinit srat_detect_node(void)
-{
-#ifdef CONFIG_NUMA
-	unsigned node;
-	int cpu = smp_processor_id();
-	int apicid = hard_smp_processor_id();
-
-	/* Don't do the funky fallback heuristics the AMD version employs
-	   for now. */
-	node = apicid_to_node[apicid];
-	if (node == NUMA_NO_NODE || !node_online(node))
-		node = first_node(node_online_map);
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-}
-
-static void __cpuinit init_intel(struct cpuinfo_x86 *c)
-{
-	init_intel_cacheinfo(c);
-	if (c->cpuid_level > 9) {
-		unsigned eax = cpuid_eax(10);
-		/* Check for version and the number of counters */
-		if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
-			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
-	}
-
-	if (cpu_has_ds) {
-		unsigned int l1, l2;
-		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
-		if (!(l1 & (1<<11)))
-			set_cpu_cap(c, X86_FEATURE_BTS);
-		if (!(l1 & (1<<12)))
-			set_cpu_cap(c, X86_FEATURE_PEBS);
-	}
-
-
-	if (cpu_has_bts)
-		ds_init_intel(c);
-
-	if (c->x86 == 15)
-		c->x86_cache_alignment = c->x86_clflush_size * 2;
-	if (c->x86 == 6)
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-	c->x86_max_cores = intel_num_cpu_cores(c);
-
-	srat_detect_node();
-}
-
-static struct cpu_dev intel_cpu_dev __cpuinitdata = {
-	.c_vendor	= "Intel",
-	.c_ident	= { "GenuineIntel" },
-	.c_early_init   = early_init_intel,
-	.c_init		= init_intel,
-};
-cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
-

arch/x86/kernel/cpu/mcheck/mce_64.c

@@ -860,7 +860,7 @@ static __cpuinit int mce_create_device(unsigned int cpu)
 	return err;
 }
 
-static void mce_remove_device(unsigned int cpu)
+static __cpuinit void mce_remove_device(unsigned int cpu)
 {
 	int i;
 

arch/x86/kernel/cpu/mkcapflags.pl

+#!/usr/bin/perl
+#
+# Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h
+#
+
+($in, $out) = @ARGV;
+
+open(IN, "< $in\0")   or die "$0: cannot open: $in: $!\n";
+open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n";
+
+print OUT "#include <asm/cpufeature.h>\n\n";
+print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n";
+
+while (defined($line = <IN>)) {
+	if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) {
+		$macro = $1;
+		$feature = $2;
+		$tail = $3;
+		if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) {
+			$feature = $1;
+		}
+
+		if ($feature ne '') {
+			printf OUT "\t%-32s = \"%s\",\n",
+				"[$macro]", "\L$feature";
+		}
+	}
+}
+print OUT "};\n";
+
+close(IN);
+close(OUT);

arch/x86/kernel/cpu/powerflags.c

+/*
+ * Strings for the various x86 power flags
+ *
+ * This file must not contain any executable code.
+ */
+
+#include <asm/cpufeature.h>
+
+const char *const x86_power_flags[32] = {
+	"ts",	/* temperature sensor */
+	"fid",  /* frequency id control */
+	"vid",  /* voltage id control */
+	"ttp",  /* thermal trip */
+	"tm",
+	"stc",
+	"100mhzsteps",
+	"hwpstate",
+	"",	/* tsc invariant mapped to constant_tsc */
+		/* nothing */
+};

arch/x86/kernel/cpu/transmeta.c

@@ -5,6 +5,18 @@
 #include <asm/msr.h>
 #include "cpu.h"
 
+static void __cpuinit early_init_transmeta(struct cpuinfo_x86 *c)
+{
+	u32 xlvl;
+
+	/* Transmeta-defined flags: level 0x80860001 */
+	xlvl = cpuid_eax(0x80860000);
+	if ((xlvl & 0xffff0000) == 0x80860000) {
+		if (xlvl >= 0x80860001)
+			c->x86_capability[2] = cpuid_edx(0x80860001);
+	}
+}
+
 static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 {
 	unsigned int cap_mask, uk, max, dummy;
@@ -12,7 +24,8 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 	unsigned int cpu_rev, cpu_freq = 0, cpu_flags, new_cpu_rev;
 	char cpu_info[65];
 
-	get_model_name(c);	/* Same as AMD/Cyrix */
+	early_init_transmeta(c);
+
 	display_cacheinfo(c);
 
 	/* Print CMS and CPU revision */
@@ -85,23 +98,12 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 #endif
 }
 
-static void __cpuinit transmeta_identify(struct cpuinfo_x86 *c)
-{
-	u32 xlvl;
-
-	/* Transmeta-defined flags: level 0x80860001 */
-	xlvl = cpuid_eax(0x80860000);
-	if ((xlvl & 0xffff0000) == 0x80860000) {
-		if (xlvl >= 0x80860001)
-			c->x86_capability[2] = cpuid_edx(0x80860001);
-	}
-}
-
 static struct cpu_dev transmeta_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Transmeta",
 	.c_ident	= { "GenuineTMx86", "TransmetaCPU" },
+	.c_early_init	= early_init_transmeta,
 	.c_init		= init_transmeta,
-	.c_identify	= transmeta_identify,
+	.c_x86_vendor	= X86_VENDOR_TRANSMETA,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_TRANSMETA, &transmeta_cpu_dev);
+cpu_dev_register(transmeta_cpu_dev);

arch/x86/kernel/cpu/umc.c

@@ -19,7 +19,8 @@ static struct cpu_dev umc_cpu_dev __cpuinitdata = {
 		  }
 		},
 	},
+	.c_x86_vendor	= X86_VENDOR_UMC,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_UMC, &umc_cpu_dev);
+cpu_dev_register(umc_cpu_dev);
 

arch/x86/kernel/e820.c

@@ -148,6 +148,9 @@ void __init e820_print_map(char *who)
 		case E820_NVS:
 			printk(KERN_CONT "(ACPI NVS)\n");
 			break;
+		case E820_UNUSABLE:
+			printk("(unusable)\n");
+			break;
 		default:
 			printk(KERN_CONT "type %u\n", e820.map[i].type);
 			break;
@@ -1260,6 +1263,7 @@ static inline const char *e820_type_to_string(int e820_type)
 	case E820_RAM:	return "System RAM";
 	case E820_ACPI:	return "ACPI Tables";
 	case E820_NVS:	return "ACPI Non-volatile Storage";
+	case E820_UNUSABLE:	return "Unusable memory";
 	default:	return "reserved";
 	}
 }
@@ -1267,6 +1271,7 @@ static inline const char *e820_type_to_string(int e820_type)
 /*
  * Mark e820 reserved areas as busy for the resource manager.
  */
+static struct resource __initdata *e820_res;
 void __init e820_reserve_resources(void)
 {
 	int i;
@@ -1274,6 +1279,7 @@ void __init e820_reserve_resources(void)
 	u64 end;
 
 	res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
+	e820_res = res;
 	for (i = 0; i < e820.nr_map; i++) {
 		end = e820.map[i].addr + e820.map[i].size - 1;
 #ifndef CONFIG_RESOURCES_64BIT
@@ -1287,7 +1293,14 @@ void __init e820_reserve_resources(void)
 		res->end = end;
 
 		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		insert_resource(&iomem_resource, res);
+
+		/*
+		 * don't register the region that could be conflicted with
+		 * pci device BAR resource and insert them later in
+		 * pcibios_resource_survey()
+		 */
+		if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20))
+			insert_resource(&iomem_resource, res);
 		res++;
 	}
 
@@ -1299,6 +1312,19 @@ void __init e820_reserve_resources(void)
 	}
 }
 
+void __init e820_reserve_resources_late(void)
+{
+	int i;
+	struct resource *res;
+
+	res = e820_res;
+	for (i = 0; i < e820.nr_map; i++) {
+		if (!res->parent && res->end)
+			reserve_region_with_split(&iomem_resource, res->start, res->end, res->name);
+		res++;
+	}
+}
+
 char *__init default_machine_specific_memory_setup(void)
 {
 	char *who = "BIOS-e820";

arch/x86/kernel/mpparse.c

@@ -397,7 +397,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
        generic_bigsmp_probe();
 #endif
 
+#ifdef CONFIG_X86_32
 	setup_apic_routing();
+#endif
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");
 	return num_processors;