ARM: dts: kirkwood: Fixup pcie DT warnings

PCIe has a range property, so the unit name should contain an address.
Make use of the label to enable individual PCIe busses. Also, fixup
the synology dtsi file which added a label pcie2 rather than using the
existing pcie1 label.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm/boot/dts/kirkwood-6192.dtsi

 / {
 	mbus {
-		pciec: pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";

arch/arm/boot/dts/kirkwood-6281.dtsi

 / {
 	mbus {
-		pciec: pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";

arch/arm/boot/dts/kirkwood-6282.dtsi

 / {
 	mbus {
-		pciec: pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";

arch/arm/boot/dts/kirkwood-98dx4122.dtsi

 / {
 	mbus {
-		pciec: pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";

arch/arm/boot/dts/kirkwood-b3.dts

@@ -33,17 +33,6 @@ chosen {
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			/* Wifi model has Atheros chipset on pcie port */
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_button_power: pmx-button-power {
@@ -199,3 +188,11 @@ ethernet1-port@0 {
 	};
 };
 
+/* Wifi model has Atheros chipset on pcie port */
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-db-88f6281.dts

@@ -17,14 +17,12 @@
 / {
 	model = "Marvell DB-88F6281-BP Development Board";
 	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
+&pciec {
+        status = "okay";
+};
 
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
+&pcie0 {
+	status = "okay";
 };

arch/arm/boot/dts/kirkwood-db-88f6282.dts

@@ -17,18 +17,16 @@
 / {
 	model = "Marvell DB-88F6282-BP Development Board";
 	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
+&pciec {
+        status = "okay";
+};
 
-			pcie@1,0 {
-				status = "okay";
-			};
+&pcie0 {
+	status = "okay";
+};
 
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
+&pcie1 {
+	status = "okay";
 };

arch/arm/boot/dts/kirkwood-dir665.dts

@@ -25,16 +25,6 @@ chosen {
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 =< &pmx_led_usb
@@ -276,3 +266,11 @@ &eth1 {
 &rtc {
 	status = "disabled";
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-ds111.dts

@@ -40,6 +40,6 @@ &s35390a {
 	status = "okay";
 };
 
-&pcie2 {
+&pcie1 {
 	status = "okay";
 };

arch/arm/boot/dts/kirkwood-ds112.dts

@@ -44,6 +44,10 @@ &s35390a {
 	status = "okay";
 };
 
-&pcie2 {
+&pciec {
+        status = "okay";
+};
+
+&pcie1 {
 	status = "okay";
 };

arch/arm/boot/dts/kirkwood-ds212.dts

@@ -43,6 +43,6 @@ &s35390a {
 	status = "okay";
 };
 
-&pcie2 {
+&pcie1 {
 	status = "okay";
 };

arch/arm/boot/dts/kirkwood-ds411.dts

@@ -48,6 +48,10 @@ &s35390a {
 	status = "okay";
 };
 
-&pcie2 {
+&pciec {
+        status = "okay";
+};
+
+&pcie1 {
 	status = "okay";
 };

arch/arm/boot/dts/kirkwood-ds411slim.dts

@@ -44,6 +44,6 @@ &s35390a {
 	status = "okay";
 };
 
-&pcie2 {
+&pcie1 {
 	status = "okay";
 };

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -19,16 +19,6 @@ chosen {
 		linux,initrd-end   = <0x4800000>;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_button_reset: pmx-button-reset {
@@ -194,3 +184,11 @@ ethernet0-port@0 {
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-km_common.dtsi

@@ -4,16 +4,6 @@ chosen {
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
@@ -46,3 +36,11 @@ &nand {
 	status = "okay";
 	chip-delay = <25>;
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-laplug.dts

@@ -27,15 +27,6 @@ chosen {
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		serial@12000 {
 			status = "okay";
@@ -169,3 +160,11 @@ ethernet0-port@0 {
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-linkstation.dtsi

@@ -49,15 +49,6 @@ chosen {
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_power_hdd0: pmx-power-hdd0 {
@@ -200,3 +191,11 @@ hdd_power0: regulator@2 {
 		};
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-mplcec4.dts

@@ -17,16 +17,6 @@ chosen {
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_led_health: pmx-led-health {
@@ -215,3 +205,11 @@ ethernet1-port@0 {
 		phy-handle = <&ethphy1>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts

@@ -31,16 +31,6 @@ chosen {
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-        };
-
 	ocp@f1000000 {
 		pin-controller@10000 {
 			pmx_usb_led: pmx-usb-led {
@@ -179,3 +169,11 @@ ethernet0-port@0 {
 		duplex = <1>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-nas2big.dts

@@ -28,16 +28,6 @@ chosen {
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		rtc@10300 {
 			/* The on-chip RTC is not powered (no supercap). */
@@ -141,3 +131,11 @@ partition@9100000 {
 		reg = <0x9100000 0x6f00000>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};