Commit ebb812cb authored by Mark Brown's avatar Mark Brown

ALSA: Add support for key reporting via the jack interface

Some devices provide support for detection of a small number of
buttons on their jacks. One common implementation provides a single
button, implemented by shorting the microphone to ground and detected
along with microphone presence detection by detecting varying current
draws on the microphone bias signal.

Provide support for up to three buttons via the jack interface. These
default to reporting BTN_n but an API is provided to allow these to
be remapped to other keys by the machine driver where it knows what
the keys are. More keys can be added with ease if required.

This is only intended to support simple accessory button designs. If
the interface is limiting then either creating a child device for the
accessory or accessing the input device in the jack directly is
recommended.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 1c6e555c
...@@ -42,6 +42,11 @@ enum snd_jack_types { ...@@ -42,6 +42,11 @@ enum snd_jack_types {
SND_JACK_MECHANICAL = 0x0008, /* If detected separately */ SND_JACK_MECHANICAL = 0x0008, /* If detected separately */
SND_JACK_VIDEOOUT = 0x0010, SND_JACK_VIDEOOUT = 0x0010,
SND_JACK_AVOUT = SND_JACK_LINEOUT | SND_JACK_VIDEOOUT, SND_JACK_AVOUT = SND_JACK_LINEOUT | SND_JACK_VIDEOOUT,
/* Kept separate from switches to facilitate implementation */
SND_JACK_BTN_0 = 0x4000,
SND_JACK_BTN_1 = 0x2000,
SND_JACK_BTN_2 = 0x1000,
}; };
struct snd_jack { struct snd_jack {
...@@ -50,6 +55,7 @@ struct snd_jack { ...@@ -50,6 +55,7 @@ struct snd_jack {
int type; int type;
const char *id; const char *id;
char name[100]; char name[100];
unsigned int key[3]; /* Keep in sync with definitions above */
void *private_data; void *private_data;
void (*private_free)(struct snd_jack *); void (*private_free)(struct snd_jack *);
}; };
...@@ -59,6 +65,8 @@ struct snd_jack { ...@@ -59,6 +65,8 @@ struct snd_jack {
int snd_jack_new(struct snd_card *card, const char *id, int type, int snd_jack_new(struct snd_card *card, const char *id, int type,
struct snd_jack **jack); struct snd_jack **jack);
void snd_jack_set_parent(struct snd_jack *jack, struct device *parent); void snd_jack_set_parent(struct snd_jack *jack, struct device *parent);
int snd_jack_set_key(struct snd_jack *jack, enum snd_jack_types type,
int keytype);
void snd_jack_report(struct snd_jack *jack, int status); void snd_jack_report(struct snd_jack *jack, int status);
......
...@@ -55,7 +55,7 @@ static int snd_jack_dev_register(struct snd_device *device) ...@@ -55,7 +55,7 @@ static int snd_jack_dev_register(struct snd_device *device)
{ {
struct snd_jack *jack = device->device_data; struct snd_jack *jack = device->device_data;
struct snd_card *card = device->card; struct snd_card *card = device->card;
int err; int err, i;
snprintf(jack->name, sizeof(jack->name), "%s %s", snprintf(jack->name, sizeof(jack->name), "%s %s",
card->shortname, jack->id); card->shortname, jack->id);
...@@ -65,6 +65,19 @@ static int snd_jack_dev_register(struct snd_device *device) ...@@ -65,6 +65,19 @@ static int snd_jack_dev_register(struct snd_device *device)
if (!jack->input_dev->dev.parent) if (!jack->input_dev->dev.parent)
jack->input_dev->dev.parent = snd_card_get_device_link(card); jack->input_dev->dev.parent = snd_card_get_device_link(card);
/* Add capabilities for any keys that are enabled */
for (i = 0; i < ARRAY_SIZE(jack->key); i++) {
int testbit = SND_JACK_BTN_0 >> i;
if (!(jack->type & testbit))
continue;
if (!jack->key[i])
jack->key[i] = BTN_0 + i;
input_set_capability(jack->input_dev, EV_KEY, jack->key[i]);
}
err = input_register_device(jack->input_dev); err = input_register_device(jack->input_dev);
if (err == 0) if (err == 0)
jack->registered = 1; jack->registered = 1;
...@@ -150,6 +163,43 @@ void snd_jack_set_parent(struct snd_jack *jack, struct device *parent) ...@@ -150,6 +163,43 @@ void snd_jack_set_parent(struct snd_jack *jack, struct device *parent)
} }
EXPORT_SYMBOL(snd_jack_set_parent); EXPORT_SYMBOL(snd_jack_set_parent);
/**
* snd_jack_set_key - Set a key mapping on a jack
*
* @jack: The jack to configure
* @type: Jack report type for this key
* @keytype: Input layer key type to be reported
*
* Map a SND_JACK_BTN_ button type to an input layer key, allowing
* reporting of keys on accessories via the jack abstraction. If no
* mapping is provided but keys are enabled in the jack type then
* BTN_n numeric buttons will be reported.
*
* Note that this is intended to be use by simple devices with small
* numbers of keys that can be reported. It is also possible to
* access the input device directly - devices with complex input
* capabilities on accessories should consider doing this rather than
* using this abstraction.
*
* This function may only be called prior to registration of the jack.
*/
int snd_jack_set_key(struct snd_jack *jack, enum snd_jack_types type,
int keytype)
{
int key = fls(SND_JACK_BTN_0) - fls(type);
WARN_ON(jack->registered);
if (!keytype || key >= ARRAY_SIZE(jack->key))
return -EINVAL;
jack->type |= type;
jack->key[key] = keytype;
return 0;
}
EXPORT_SYMBOL(snd_jack_set_key);
/** /**
* snd_jack_report - Report the current status of a jack * snd_jack_report - Report the current status of a jack
* *
...@@ -163,6 +213,14 @@ void snd_jack_report(struct snd_jack *jack, int status) ...@@ -163,6 +213,14 @@ void snd_jack_report(struct snd_jack *jack, int status)
if (!jack) if (!jack)
return; return;
for (i = 0; i < ARRAY_SIZE(jack->key); i++) {
int testbit = SND_JACK_BTN_0 >> i;
if (jack->type & testbit)
input_report_key(jack->input_dev, jack->key[i],
status & testbit);
}
for (i = 0; i < ARRAY_SIZE(jack_switch_types); i++) { for (i = 0; i < ARRAY_SIZE(jack_switch_types); i++) {
int testbit = 1 << i; int testbit = 1 << i;
if (jack->type & testbit) if (jack->type & testbit)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment