ARM: dts: sunxi: rename tcon's clock output

While the rate of TCON0's DCLK matches dotclock for parallel and LVDS
outputs, this doesn't hold for DSI. According manuals from Allwinner,
DCLK is an abbreviation of Data Clock, not dotclock, so go with that
instead.
Signed-off-by: Roman Beranek <me@crly.cz>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20230505052110.67514-3-me@crly.czSigned-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>

arch/arm/boot/dts/sun5i.dtsi

@@ -286,7 +286,7 @@ tcon0: lcd-controller@1c0c000 {
 			clock-names = "ahb",
 				      "tcon-ch0",
 				      "tcon-ch1";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			status = "disabled";
 

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -190,7 +190,7 @@ tcon0: lcd-controller@1c0c000 {
 			clock-names = "ahb",
 				      "tcon-ch0",
 				      "lvds-alt";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			resets = <&ccu RST_BUS_LCD>,
 				 <&ccu RST_BUS_LVDS>;

arch/arm/boot/dts/sun8i-a83t.dtsi

@@ -456,7 +456,7 @@ tcon0: lcd-controller@1c0c000 {
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
 			clock-names = "ahb", "tcon-ch0";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";

arch/arm/boot/dts/sun8i-v3s.dtsi

@@ -191,7 +191,7 @@ tcon0: lcd-controller@1c0c000 {
 				 <&ccu CLK_TCON0>;
 			clock-names = "ahb",
 				      "tcon-ch0";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			resets = <&ccu RST_BUS_TCON0>;
 			reset-names = "lcd";

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -407,7 +407,7 @@ tcon0: lcd-controller@1c0c000 {
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
 			clock-names = "ahb", "tcon-ch0";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";