Commit ecd3ee3d authored by Maxime Ripard's avatar Maxime Ripard

Merge tag 'asoc-hdmi-codec-improvements-v2' of...

Merge tag 'asoc-hdmi-codec-improvements-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-misc-next

Improvements to the hdmi-codec driver and ALSA infrastructure around it
to support the HDMI Channel Mapping and IEC958 controls
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYMHitQAKCRDj7w1vZxhR
# xQ40AP49z0mUifkpbyUvYwdmrUVlg2JEWSTOWaH3tp0kke/dBQEA1vYxdMimhFu3
# SYKXxgtvlT7vL48vNYBxGbNuGQvzJw4=
# =IWna
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 10 Jun 2021 12:00:21 PM CEST
# gpg:                using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5
# gpg: Good signature from "Maxime Ripard <maxime.ripard@anandra.org>" [unknown]
# gpg:                 aka "Maxime Ripard <mripard@kernel.org>" [unknown]
# gpg:                 aka "Maxime Ripard (Work Address) <maxime@cerno.tech>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: BE56 75C3 7E81 8C8B 5764  241C 254B CFC5 6BF6 CE8D
#      Subkey fingerprint: 5C13 37A4 5ECA 9AEB 8906  0E9E E3EF 0D6F 6718 51C5
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610122550.jnriewchqspdcrwk@gilmour
parents bacbab58 2fef64ee
......@@ -3508,14 +3508,15 @@ field must be set, though).
“IEC958 Playback Con Mask” is used to return the bit-mask for the IEC958
status bits of consumer mode. Similarly, “IEC958 Playback Pro Mask”
returns the bitmask for professional mode. They are read-only controls,
and are defined as MIXER controls (iface =
``SNDRV_CTL_ELEM_IFACE_MIXER``).
returns the bitmask for professional mode. They are read-only controls.
Meanwhile, “IEC958 Playback Default” control is defined for getting and
setting the current default IEC958 bits. Note that this one is usually
defined as a PCM control (iface = ``SNDRV_CTL_ELEM_IFACE_PCM``),
although in some places it's defined as a MIXER control.
setting the current default IEC958 bits.
Due to historical reasons, both variants of the Playback Mask and the
Playback Default controls can be implemented on either a
``SNDRV_CTL_ELEM_IFACE_PCM`` or a ``SNDRV_CTL_ELEM_IFACE_MIXER`` iface.
Drivers should expose the mask and default on the same iface though.
In addition, you can define the control switches to enable/disable or to
set the raw bit mode. The implementation will depend on the chip, but
......
......@@ -65,12 +65,22 @@ struct hdmi_codec_ops {
/*
* Configures HDMI-encoder for audio stream.
* Mandatory
* Having either prepare or hw_params is mandatory.
*/
int (*hw_params)(struct device *dev, void *data,
struct hdmi_codec_daifmt *fmt,
struct hdmi_codec_params *hparms);
/*
* Configures HDMI-encoder for audio stream. Can be called
* multiple times for each setup.
*
* Having either prepare or hw_params is mandatory.
*/
int (*prepare)(struct device *dev, void *data,
struct hdmi_codec_daifmt *fmt,
struct hdmi_codec_params *hparms);
/*
* Shuts down the audio stream.
* Mandatory
......
......@@ -4,6 +4,14 @@
#include <linux/types.h>
int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len);
int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
size_t len);
int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
u8 *cs, size_t len);
int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
size_t len);
......
......@@ -9,41 +9,85 @@
#include <sound/pcm_params.h>
#include <sound/pcm_iec958.h>
static int create_iec958_consumer(uint rate, uint sample_width,
u8 *cs, size_t len)
/**
* snd_pcm_create_iec958_consumer_default - create default consumer format IEC958 channel status
* @cs: channel status buffer, at least four bytes
* @len: length of channel status buffer
*
* Create the consumer format channel status data in @cs of maximum size
* @len. When relevant, the configuration-dependant bits will be set as
* unspecified.
*
* Drivers should then call einter snd_pcm_fill_iec958_consumer() or
* snd_pcm_fill_iec958_consumer_hw_params() to replace these unspecified
* bits by their actual values.
*
* Drivers may wish to tweak the contents of the buffer after creation.
*
* Returns: length of buffer, or negative error code if something failed.
*/
int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
{
unsigned int fs, ws;
if (len < 4)
return -EINVAL;
switch (rate) {
case 32000:
fs = IEC958_AES3_CON_FS_32000;
break;
case 44100:
fs = IEC958_AES3_CON_FS_44100;
break;
case 48000:
fs = IEC958_AES3_CON_FS_48000;
break;
case 88200:
fs = IEC958_AES3_CON_FS_88200;
break;
case 96000:
fs = IEC958_AES3_CON_FS_96000;
break;
case 176400:
fs = IEC958_AES3_CON_FS_176400;
break;
case 192000:
fs = IEC958_AES3_CON_FS_192000;
break;
default:
memset(cs, 0, len);
cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
cs[1] = IEC958_AES1_CON_GENERAL;
cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
if (len > 4)
cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
return len;
}
EXPORT_SYMBOL_GPL(snd_pcm_create_iec958_consumer_default);
static int fill_iec958_consumer(uint rate, uint sample_width,
u8 *cs, size_t len)
{
if (len < 4)
return -EINVAL;
if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
unsigned int fs;
switch (rate) {
case 32000:
fs = IEC958_AES3_CON_FS_32000;
break;
case 44100:
fs = IEC958_AES3_CON_FS_44100;
break;
case 48000:
fs = IEC958_AES3_CON_FS_48000;
break;
case 88200:
fs = IEC958_AES3_CON_FS_88200;
break;
case 96000:
fs = IEC958_AES3_CON_FS_96000;
break;
case 176400:
fs = IEC958_AES3_CON_FS_176400;
break;
case 192000:
fs = IEC958_AES3_CON_FS_192000;
break;
default:
return -EINVAL;
}
cs[3] &= ~IEC958_AES3_CON_FS;
cs[3] |= fs;
}
if (len > 4) {
if (len > 4 &&
(cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
unsigned int ws;
switch (sample_width) {
case 16:
ws = IEC958_AES4_CON_WORDLEN_20_16;
......@@ -64,20 +108,57 @@ static int create_iec958_consumer(uint rate, uint sample_width,
default:
return -EINVAL;
}
}
memset(cs, 0, len);
cs[4] &= ~IEC958_AES4_CON_WORDLEN;
cs[4] |= ws;
}
cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
cs[1] = IEC958_AES1_CON_GENERAL;
cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
return len;
}
if (len > 4)
cs[4] = ws;
/**
* snd_pcm_fill_iec958_consumer - Fill consumer format IEC958 channel status
* @runtime: pcm runtime structure with ->rate filled in
* @cs: channel status buffer, at least four bytes
* @len: length of channel status buffer
*
* Fill the unspecified bits in an IEC958 status bits array using the
* parameters of the PCM runtime @runtime.
*
* Drivers may wish to tweak the contents of the buffer after its been
* filled.
*
* Returns: length of buffer, or negative error code if something failed.
*/
int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
u8 *cs, size_t len)
{
return fill_iec958_consumer(runtime->rate,
snd_pcm_format_width(runtime->format),
cs, len);
}
EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer);
return len;
/**
* snd_pcm_fill_iec958_consumer_hw_params - Fill consumer format IEC958 channel status
* @params: the hw_params instance for extracting rate and sample format
* @cs: channel status buffer, at least four bytes
* @len: length of channel status buffer
*
* Fill the unspecified bits in an IEC958 status bits array using the
* parameters of the PCM hardware parameters @params.
*
* Drivers may wish to tweak the contents of the buffer after its been
* filled..
*
* Returns: length of buffer, or negative error code if something failed.
*/
int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
u8 *cs, size_t len)
{
return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
}
EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer_hw_params);
/**
* snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
......@@ -95,9 +176,13 @@ static int create_iec958_consumer(uint rate, uint sample_width,
int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
size_t len)
{
return create_iec958_consumer(runtime->rate,
snd_pcm_format_width(runtime->format),
cs, len);
int ret;
ret = snd_pcm_create_iec958_consumer_default(cs, len);
if (ret < 0)
return ret;
return snd_pcm_fill_iec958_consumer(runtime, cs, len);
}
EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
......@@ -117,7 +202,12 @@ EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
u8 *cs, size_t len)
{
return create_iec958_consumer(params_rate(params), params_width(params),
cs, len);
int ret;
ret = snd_pcm_create_iec958_consumer_default(cs, len);
if (ret < 0)
return ret;
return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
}
EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
......@@ -277,6 +277,7 @@ struct hdmi_codec_priv {
bool busy;
struct snd_soc_jack *jack;
unsigned int jack_status;
u8 iec_status[5];
};
static const struct snd_soc_dapm_widget hdmi_widgets[] = {
......@@ -385,6 +386,47 @@ static int hdmi_codec_chmap_ctl_get(struct snd_kcontrol *kcontrol,
return 0;
}
static int hdmi_codec_iec958_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
uinfo->count = 1;
return 0;
}
static int hdmi_codec_iec958_default_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
memcpy(ucontrol->value.iec958.status, hcp->iec_status,
sizeof(hcp->iec_status));
return 0;
}
static int hdmi_codec_iec958_default_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
memcpy(hcp->iec_status, ucontrol->value.iec958.status,
sizeof(hcp->iec_status));
return 0;
}
static int hdmi_codec_iec958_mask_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
memset(ucontrol->value.iec958.status, 0xff,
sizeof_field(struct hdmi_codec_priv, iec_status));
return 0;
}
static int hdmi_codec_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
......@@ -439,6 +481,42 @@ static void hdmi_codec_shutdown(struct snd_pcm_substream *substream,
mutex_unlock(&hcp->lock);
}
static int hdmi_codec_fill_codec_params(struct snd_soc_dai *dai,
unsigned int sample_width,
unsigned int sample_rate,
unsigned int channels,
struct hdmi_codec_params *hp)
{
struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
int idx;
/* Select a channel allocation that matches with ELD and pcm channels */
idx = hdmi_codec_get_ch_alloc_table_idx(hcp, channels);
if (idx < 0) {
dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
idx);
hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
return idx;
}
memset(hp, 0, sizeof(*hp));
hdmi_audio_infoframe_init(&hp->cea);
hp->cea.channels = channels;
hp->cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
hp->cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
hp->cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
hp->cea.channel_allocation = hdmi_codec_channel_alloc[idx].ca_id;
hp->sample_width = sample_width;
hp->sample_rate = sample_rate;
hp->channels = channels;
hcp->chmap_idx = hdmi_codec_channel_alloc[idx].ca_id;
return 0;
}
static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
......@@ -453,46 +531,73 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
.dig_subframe = { 0 },
}
};
int ret, idx;
int ret;
if (!hcp->hcd.ops->hw_params)
return 0;
dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
params_width(params), params_rate(params),
params_channels(params));
ret = snd_pcm_create_iec958_consumer_hw_params(params, hp.iec.status,
sizeof(hp.iec.status));
ret = hdmi_codec_fill_codec_params(dai,
params_width(params),
params_rate(params),
params_channels(params),
&hp);
if (ret < 0)
return ret;
memcpy(hp.iec.status, hcp->iec_status, sizeof(hp.iec.status));
ret = snd_pcm_fill_iec958_consumer_hw_params(params, hp.iec.status,
sizeof(hp.iec.status));
if (ret < 0) {
dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
ret);
return ret;
}
hdmi_audio_infoframe_init(&hp.cea);
hp.cea.channels = params_channels(params);
hp.cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
hp.cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
hp.cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
/* Select a channel allocation that matches with ELD and pcm channels */
idx = hdmi_codec_get_ch_alloc_table_idx(hcp, hp.cea.channels);
if (idx < 0) {
dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
idx);
hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
return idx;
}
hp.cea.channel_allocation = hdmi_codec_channel_alloc[idx].ca_id;
hcp->chmap_idx = hdmi_codec_channel_alloc[idx].ca_id;
hp.sample_width = params_width(params);
hp.sample_rate = params_rate(params);
hp.channels = params_channels(params);
cf->bit_fmt = params_format(params);
return hcp->hcd.ops->hw_params(dai->dev->parent, hcp->hcd.data,
cf, &hp);
}
static int hdmi_codec_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
struct hdmi_codec_daifmt *cf = dai->playback_dma_data;
struct snd_pcm_runtime *runtime = substream->runtime;
unsigned int channels = runtime->channels;
unsigned int width = snd_pcm_format_width(runtime->format);
unsigned int rate = runtime->rate;
struct hdmi_codec_params hp;
int ret;
if (!hcp->hcd.ops->prepare)
return 0;
dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
width, rate, channels);
ret = hdmi_codec_fill_codec_params(dai, width, rate, channels, &hp);
if (ret < 0)
return ret;
memcpy(hp.iec.status, hcp->iec_status, sizeof(hp.iec.status));
ret = snd_pcm_fill_iec958_consumer(runtime, hp.iec.status,
sizeof(hp.iec.status));
if (ret < 0) {
dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
ret);
return ret;
}
cf->bit_fmt = runtime->format;
return hcp->hcd.ops->prepare(dai->dev->parent, hcp->hcd.data,
cf, &hp);
}
static int hdmi_codec_i2s_set_fmt(struct snd_soc_dai *dai,
unsigned int fmt)
{
......@@ -584,6 +689,7 @@ static const struct snd_soc_dai_ops hdmi_codec_i2s_dai_ops = {
.startup = hdmi_codec_startup,
.shutdown = hdmi_codec_shutdown,
.hw_params = hdmi_codec_hw_params,
.prepare = hdmi_codec_prepare,
.set_fmt = hdmi_codec_i2s_set_fmt,
.mute_stream = hdmi_codec_mute,
};
......@@ -620,21 +726,37 @@ static const struct snd_soc_dai_ops hdmi_codec_spdif_dai_ops = {
SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE |\
SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE)
struct snd_kcontrol_new hdmi_codec_controls[] = {
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
.info = hdmi_codec_iec958_info,
.get = hdmi_codec_iec958_mask_get,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
.info = hdmi_codec_iec958_info,
.get = hdmi_codec_iec958_default_get,
.put = hdmi_codec_iec958_default_put,
},
{
.access = (SNDRV_CTL_ELEM_ACCESS_READ |
SNDRV_CTL_ELEM_ACCESS_VOLATILE),
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = "ELD",
.info = hdmi_eld_ctl_info,
.get = hdmi_eld_ctl_get,
},
};
static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
struct snd_soc_dai *dai)
{
struct snd_soc_dai_driver *drv = dai->driver;
struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
struct snd_kcontrol *kctl;
struct snd_kcontrol_new hdmi_eld_ctl = {
.access = SNDRV_CTL_ELEM_ACCESS_READ |
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = "ELD",
.info = hdmi_eld_ctl_info,
.get = hdmi_eld_ctl_get,
.device = rtd->pcm->device,
};
unsigned int i;
int ret;
ret = snd_pcm_add_chmap_ctls(rtd->pcm, SNDRV_PCM_STREAM_PLAYBACK,
......@@ -651,12 +773,21 @@ static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
hcp->chmap_info->chmap = hdmi_codec_stereo_chmaps;
hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
/* add ELD ctl with the device number corresponding to the PCM stream */
kctl = snd_ctl_new1(&hdmi_eld_ctl, dai->component);
if (!kctl)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(hdmi_codec_controls); i++) {
struct snd_kcontrol *kctl;
/* add ELD ctl with the device number corresponding to the PCM stream */
kctl = snd_ctl_new1(&hdmi_codec_controls[i], dai->component);
if (!kctl)
return -ENOMEM;
return snd_ctl_add(rtd->card->snd_card, kctl);
kctl->id.device = rtd->pcm->device;
ret = snd_ctl_add(rtd->card->snd_card, kctl);
if (ret < 0)
return ret;
}
return 0;
}
static int hdmi_dai_probe(struct snd_soc_dai *dai)
......@@ -849,7 +980,8 @@ static int hdmi_codec_probe(struct platform_device *pdev)
}
dai_count = hcd->i2s + hcd->spdif;
if (dai_count < 1 || !hcd->ops || !hcd->ops->hw_params ||
if (dai_count < 1 || !hcd->ops ||
(!hcd->ops->hw_params && !hcd->ops->prepare) ||
!hcd->ops->audio_shutdown) {
dev_err(dev, "%s: Invalid parameters\n", __func__);
return -EINVAL;
......@@ -862,6 +994,11 @@ static int hdmi_codec_probe(struct platform_device *pdev)
hcp->hcd = *hcd;
mutex_init(&hcp->lock);
ret = snd_pcm_create_iec958_consumer_default(hcp->iec_status,
sizeof(hcp->iec_status));
if (ret < 0)
return ret;
daidrv = devm_kcalloc(dev, dai_count, sizeof(*daidrv), GFP_KERNEL);
if (!daidrv)
return -ENOMEM;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment