arm64: dts: qcom: sm8250: Disable Adreno and Venus by default

Components that rely on proprietary (not to mention signed!) firmware should
not be enabled by default, as lack of the aforementioned firmware could cause
various issues, from random errors to straight-up failing to boot.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210612192358.62602-1-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/qrb5165-rb5.dts

@@ -552,7 +552,13 @@ &dsi0_phy {
 	vdds-supply = <&vreg_l5a_0p88>;
 };
 
+&gmu {
+	status = "okay";
+};
+
 &gpu {
+	status = "okay";
+
 	zap-shader {
 		memory-region = <&gpu_mem>;
 		firmware-name = "qcom/sm8250/a650_zap.mbn";
@@ -1352,6 +1358,10 @@ &vamacro {
 	qcom,dmic-sample-rate = <600000>;
 };
 
+&venus {
+	status = "okay";
+};
+
 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
 &qup_spi0_cs_gpio {
 	drive-strength = <6>;

arch/arm64/boot/dts/qcom/sm8250-hdk.dts

@@ -365,6 +365,14 @@ vreg_l7f_1p8: ldo7 {
 	};
 };
 
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -452,3 +460,7 @@ &usb_1_dwc3 {
 &usb_2_dwc3 {
 	dr_mode = "host";
 };
+
+&venus {
+	status = "okay";
+};

arch/arm64/boot/dts/qcom/sm8250-mtp.dts

@@ -465,7 +465,13 @@ &cdsp {
 	firmware-name = "qcom/sm8250/cdsp.mbn";
 };
 
+&gmu {
+	status = "okay";
+};
+
 &gpu {
+	status = "okay";
+
 	zap-shader {
 		memory-region = <&gpu_mem>;
 		firmware-name = "qcom/sm8250/a650_zap.mbn";
@@ -691,3 +697,7 @@ &usb_2_qmpphy {
 	vdda-phy-supply = <&vreg_l9a_1p2>;
 	vdda-pll-supply = <&vreg_l18a_0p9>;
 };
+
+&venus {
+	status = "okay";
+};

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -1810,6 +1810,8 @@ gpu: gpu@3d00000 {
 
 			qcom,gmu = <&gmu>;
 
+			status = "disabled";
+
 			zap-shader {
 				memory-region = <&gpu_mem>;
 			};
@@ -1883,6 +1885,8 @@ gmu: gmu@3d6a000 {
 
 			operating-points-v2 = <&gmu_opp_table>;
 
+			status = "disabled";
+
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2387,6 +2391,8 @@ venus: video-codec@aa00000 {
 				 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
 			reset-names = "bus", "core";
 
+			status = "disabled";
+
 			video-decoder {
 				compatible = "venus-decoder";
 			};