[ARM] 5202/1: pxa: Added Mitac Mio A701 smartphone support.

The Mio A701 support features :
 - GSM support
 - Bluetooth support
 - GPS support
 - LED/Vibrator support
 - Suspend/Resume support (very dependant on Mio FlashRam)
 - Screen/Backlight support
 - Keys/Keyboard support
 - USB udc support
 - MMC/SDIO support
 - Flash Memory support
 - Battery/AC plugin support
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-pxa/Kconfig

@@ -216,6 +216,18 @@ config MACH_MAGICIAN
 	select PXA27x
 	select IWMMXT
 
+config MACH_MIOA701
+	bool "Mitac Mio A701 Support"
+	select PXA27x
+	select IWMMXT
+	select LEDS_GPIO
+	select HAVE_PWM
+	select GPIO_SYSFS
+	help
+	  Say Y here if you intend to run this kernel on a
+	  MIO A701. Currently there is only basic support
+	  for this PDA.
+
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x

arch/arm/mach-pxa/Makefile

@@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
+obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o eseries_udc.o
 obj-$(CONFIG_MACH_E740)		+= e740_lcd.o
 obj-$(CONFIG_MACH_E750)		+= e750_lcd.o

arch/arm/mach-pxa/include/mach/mioa701.h

+#ifndef _MIOA701_H_
+#define _MIOA701_H_
+
+#define MIO_CFG_IN(pin, af)		\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
+
+#define MIO_CFG_OUT(pin, af, state)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Global GPIOs */
+#define GPIO9_CHARGE_nEN			9
+#define GPIO18_POWEROFF				18
+#define GPIO87_LCD_POWER			87
+
+/* USB */
+#define GPIO13_USB_DETECT			13
+#define GPIO22_USB_ENABLE			22
+
+/* SDIO bits */
+#define GPIO78_SDIO_RO				78
+#define GPIO15_SDIO_INSERT			15
+#define GPIO91_SDIO_EN				91
+
+/* Bluetooth */
+#define GPIO83_BT_ON				83
+
+/* GPS */
+#define GPIO23_GPS_UNKNOWN1			23
+#define GPIO26_GPS_ON				26
+#define GPIO27_GPS_RESET			27
+#define GPIO106_GPS_UNKNOWN2			106
+#define GPIO107_GPS_UNKNOWN3			107
+
+/* GSM */
+#define GPIO24_GSM_MOD_RESET_CMD		24
+#define GPIO88_GSM_nMOD_ON_CMD			88
+#define GPIO90_GSM_nMOD_OFF_CMD			90
+#define GPIO114_GSM_nMOD_DTE_UART_STATE 	114
+#define GPIO25_GSM_MOD_ON_STATE			25
+#define GPIO113_GSM_EVENT			113
+
+/* SOUND */
+#define GPIO12_HPJACK_INSERT			12
+
+/* LEDS */
+#define GPIO10_LED_nCharging			10
+#define GPIO97_LED_nBlue			97
+#define GPIO98_LED_nOrange			98
+#define GPIO82_LED_nVibra			82
+#define GPIO115_LED_nKeyboard			115
+
+/* Keyboard */
+#define GPIO0_KEY_POWER				0
+#define GPIO93_KEY_VOLUME_UP			93
+#define GPIO94_KEY_VOLUME_DOWN			94
+
+extern struct input_dev *mioa701_evdev;
+extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
+
+/* Assembler externals mioa701_bootresume.S */
+extern u32 mioa701_bootstrap;
+extern u32 mioa701_jumpaddr;
+extern u32 mioa701_bootstrap_lg;
+
+#endif /* _MIOA701_H */

arch/arm/mach-pxa/mioa701_bootresume.S

+/* Bootloader to resume MIO A701
+ *
+ * 2007-1-12 Robert Jarzmik
+ *
+ * This code is licenced under the GPLv2.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Note: Yes, part of the following code is located into the .data section.
+ *       This is to allow jumpaddr to be accessed with a relative load
+ *       while we can't rely on any MMU translation.  We could have put
+ *       sleep_save_sp in the .text section as well, but some setups might
+ *       insist on it to be truly read-only.
+ */
+	.data
+ENTRY(mioa701_bootstrap)
+0:
+	b	1f
+ENTRY(mioa701_jumpaddr)
+	.word	0x40f00008		@ PSPR in no-MMU mode
+1:
+	mov	r0,     #0xa0000000	@ Don't suppose memory access works
+	orr	r0, r0, #0x00200000	@ even if it's supposed to
+	mov	r1, #0
+	str	r1, [r0]		@ Early disable resume for next boot
+	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)
+	ldr	r0, [r0]
+	mov	pc, r0
+2:
+
+ENTRY(mioa701_bootstrap_lg)
+	.data
+	.word	2b-0b