staging: mt7621-pci: remove unused macros

There some macros that are not being used. Remove them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/mt7621-pci/pci-mt7621.c

@@ -84,7 +84,6 @@
 #define RALINK_PCI_PCIMSK_ADDR		*(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
 #define RALINK_PCI_BASE	0xBE140000
 
-#define RALINK_PCIEPHY_P0P1_CTL_OFFSET	(RALINK_PCI_BASE + 0x9000)
 #define RT6855_PCIE0_OFFSET		0x2000
 #define RT6855_PCIE1_OFFSET		0x3000
 #define RT6855_PCIE2_OFFSET		0x4000
@@ -95,8 +94,6 @@
 #define RALINK_PCI0_CLASS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
 #define RALINK_PCI0_SUBID		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
 #define RALINK_PCI0_STATUS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
-#define RALINK_PCI0_DERR		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
-#define RALINK_PCI0_ECRC		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
 
 #define RALINK_PCI1_BAR0SETUP_ADDR	*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
 #define RALINK_PCI1_IMBASEBAR0_ADDR	*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
@@ -104,8 +101,6 @@
 #define RALINK_PCI1_CLASS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
 #define RALINK_PCI1_SUBID		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
 #define RALINK_PCI1_STATUS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
-#define RALINK_PCI1_DERR		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
-#define RALINK_PCI1_ECRC		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
 
 #define RALINK_PCI2_BAR0SETUP_ADDR	*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
 #define RALINK_PCI2_IMBASEBAR0_ADDR	*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
@@ -113,17 +108,10 @@
 #define RALINK_PCI2_CLASS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
 #define RALINK_PCI2_SUBID		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
 #define RALINK_PCI2_STATUS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
-#define RALINK_PCI2_DERR		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
-#define RALINK_PCI2_ECRC		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
 
 #define RALINK_PCIEPHY_P0P1_CTL_OFFSET	(RALINK_PCI_BASE + 0x9000)
 #define RALINK_PCIEPHY_P2_CTL_OFFSET	(RALINK_PCI_BASE + 0xA000)
 
-#define MV_WRITE(ofs, data)	\
-	*(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
-#define MV_READ(ofs, data)	\
-	*(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-
 #define RALINK_PCI_MM_MAP_BASE		0x60000000
 #define RALINK_PCI_IO_MAP_BASE		0x1e160000
 
@@ -141,28 +129,18 @@
 		else							\
 			rt_sysc_m32(0, val, RALINK_RSTCTRL);		\
 	} while (0)
+
 #define RALINK_CLKCFG1			0x30
 #define RALINK_RSTCTRL			0x34
 #define RALINK_GPIOMODE			0x60
 #define RALINK_PCIE_CLK_GEN		0x7c
 #define RALINK_PCIE_CLK_GEN1		0x80
-#define PPLL_CFG1			0x9c
-#define PPLL_DRV			0xa0
-/* SYSC_REG_SYSTEM_CONFIG1 bits */
-#define RALINK_PCI_HOST_MODE_EN		(1<<7)
-#define RALINK_PCIE_RC_MODE_EN		(1<<8)
 //RALINK_RSTCTRL bit
 #define RALINK_PCIE_RST			(1<<23)
 #define RALINK_PCI_RST			(1<<24)
 //RALINK_CLKCFG1 bit
 #define RALINK_PCI_CLK_EN		(1<<19)
 #define RALINK_PCIE_CLK_EN		(1<<21)
-//RALINK_GPIOMODE bit
-#define PCI_SLOTx2			(1<<11)
-#define PCI_SLOTx1			(2<<11)
-//MTK PCIE PLL bit
-#define PDRV_SW_SET			(1<<31)
-#define LC_CKDRVPD_			(1<<19)
 
 #define MEMORY_BASE 0x0
 static int pcie_link_status = 0;