[PATCH] shpchp: miscellaneous cleanups

Remove un-necessary header includes, remove dead code, remove
some type casts, receive function return in the correct data
type...
Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/pci/hotplug/shpchp.h

@@ -32,8 +32,6 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
-#include <asm/semaphore.h>
-#include <asm/io.h>		
 #include "pci_hotplug.h"
 
 #if !defined(MODULE)
@@ -80,7 +78,7 @@ struct event_info {
 struct controller {
 	struct controller *next;
 	struct semaphore crit_sect;	/* critical section semaphore */
-	void * hpc_ctlr_handle;		/* HPC controller handle */
+	struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */
 	int num_slots;			/* Number of slots on ctlr */
 	int slot_num_inc;		/* 1 or -1 */
 	struct pci_dev *pci_dev;
@@ -234,7 +232,7 @@ enum ctrl_offsets {
 	SLOT11 =	offsetof(struct ctrl_reg, slot11),
 	SLOT12 =	offsetof(struct ctrl_reg, slot12),
 };
-typedef u8(*php_intr_callback_t) (unsigned int change_id, void *instance_id);
+typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id);
 struct php_ctlr_state_s {
 	struct php_ctlr_state_s *pnext;
 	struct pci_dev *pci_dev;
@@ -347,11 +345,7 @@ enum php_ctlr_type {
 	ACPI
 };
 
-int shpc_init( struct controller *ctrl, struct pci_dev *pdev,
-		php_intr_callback_t attention_button_callback,
-		php_intr_callback_t switch_change_callback,
-		php_intr_callback_t presence_change_callback,
-		php_intr_callback_t power_fault_callback);
+int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
 
 int shpc_get_ctlr_slot_config( struct controller *ctrl,
 		int *num_ctlr_slots,
@@ -364,8 +358,6 @@ struct hpc_ops {
 	int	(*power_on_slot )		(struct slot *slot);
 	int	(*slot_enable )			(struct slot *slot);
 	int	(*slot_disable )		(struct slot *slot);
-	int	(*enable_all_slots)		(struct slot *slot);
-	int	(*pwr_on_all_slots)		(struct slot *slot);
 	int	(*set_bus_speed_mode)	(struct slot *slot, enum pci_bus_speed speed);
 	int	(*get_power_status)		(struct slot *slot, u8 *status);
 	int	(*get_attention_status)	(struct slot *slot, u8 *status);

drivers/pci/hotplug/shpchp_core.c

@@ -27,17 +27,11 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
 #include <linux/pci.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
 #include "shpchp.h"
 
 /* Global variables */
@@ -381,11 +375,7 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	dbg("DRV_thread pid = %d\n", current->pid);
 
-	rc = shpc_init(ctrl, pdev,
-			(php_intr_callback_t) shpchp_handle_attention_button,
-			(php_intr_callback_t) shpchp_handle_switch_change,
-			(php_intr_callback_t) shpchp_handle_presence_change,
-			(php_intr_callback_t) shpchp_handle_power_fault);
+	rc = shpc_init(ctrl, pdev);
 	if (rc) {
 		dbg("%s: controller initialization failed\n", SHPC_MODULE_NAME);
 		goto err_out_free_ctrl;

drivers/pci/hotplug/shpchp_ctrl.c

@@ -27,15 +27,9 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/wait.h>
 #include <linux/smp_lock.h>
 #include <linux/pci.h>
 #include "../pci.h"
@@ -242,9 +236,10 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
 /* The following routines constitute the bulk of the 
    hotplug controller logic
  */
-static u32 change_bus_speed(struct controller *ctrl, struct slot *p_slot, enum pci_bus_speed speed)
+static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
+		enum pci_bus_speed speed)
 { 
-	u32 rc = 0;
+	int rc = 0;
 
 	dbg("%s: change to speed %d\n", __FUNCTION__, speed);
 	down(&ctrl->crit_sect);
@@ -266,10 +261,11 @@ static u32 change_bus_speed(struct controller *ctrl, struct slot *p_slot, enum p
 	return rc;
 }
 
-static u32 fix_bus_speed(struct controller *ctrl, struct slot *pslot, u8 flag, 
-enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp)
+static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
+		u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp,
+		enum pci_bus_speed msp)
 { 
-	u32 rc = 0;
+	int rc = 0;
 	
 	if (flag != 0) { /* Other slots on the same bus are occupied */
 		if ( asp < bsp ) {
@@ -308,11 +304,11 @@ enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp)
  * Configures board
  *
  */
-static u32 board_added(struct slot *p_slot)
+static int board_added(struct slot *p_slot)
 {
 	u8 hp_slot;
 	u8 slots_not_empty = 0;
-	u32 rc = 0;
+	int rc = 0;
 	enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed;
 	u8 pi, mode;
 	struct controller *ctrl = p_slot->ctrl;
@@ -580,11 +576,11 @@ static u32 board_added(struct slot *p_slot)
  * remove_board - Turns off slot and LED's
  *
  */
-static u32 remove_board(struct slot *p_slot)
+static int remove_board(struct slot *p_slot)
 {
 	struct controller *ctrl = p_slot->ctrl;
 	u8 hp_slot;
-	u32 rc;
+	int rc;
 
 	if (shpchp_unconfigure_device(p_slot))
 		return(1);
@@ -961,7 +957,6 @@ int shpchp_enable_slot (struct slot *p_slot)
 int shpchp_disable_slot (struct slot *p_slot)
 {
 	u8 getstatus = 0;
-	u32 rc = 0;
 	int ret = 0;
 
 	if (!p_slot->ctrl)
@@ -990,8 +985,8 @@ int shpchp_disable_slot (struct slot *p_slot)
 	}
 	up(&p_slot->ctrl->crit_sect);
 
-	rc = remove_board(p_slot);
+	ret = remove_board(p_slot);
 	update_slot_info(p_slot);
-	return rc;
+	return ret;
 }
 

drivers/pci/hotplug/shpchp_pci.c

@@ -27,13 +27,9 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/proc_fs.h>
 #include <linux/pci.h>
 #include "../pci.h"
 #include "shpchp.h"

drivers/pci/hotplug/shpchp_sysfs.c

@@ -26,12 +26,9 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/workqueue.h>
 #include <linux/pci.h>
 #include "shpchp.h"
 

drivers/pci/hotplug/shpchprm_acpi.c

@@ -24,16 +24,10 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <linux/efi.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
 #include <acpi/acpi.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/actypes.h>

drivers/pci/hotplug/shpchprm_legacy.c

@@ -27,15 +27,11 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
 #include "shpchp.h"
-#include "shpchprm.h"
 
 int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
 {

drivers/pci/hotplug/shpchprm_nonacpi.c

@@ -32,10 +32,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
 #include "shpchp.h"
-#include "shpchprm.h"
 
 int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
 {