ARM: dts: am335x-boneblack.dts: unique gpio-line-names

Based on linux-gpio discussion [1], it is best practice to make the
gpio-line-names unique. Generic names like "[ethernet]" are replaced
with the name of the unique signal on the AM3358 SoC ball corresponding
to the gpio line. "[NC]" is also renamed to the standard "NC" name to
represent "not connected".

[1] https://lore.kernel.org/linux-gpio/20201216195357.GA2583366@x1/Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am335x-boneblack.dts

@@ -26,54 +26,54 @@ oppnitro-1000000000 {
 
 &gpio0 {
 	gpio-line-names =
-		"[ethernet]",
-		"[ethernet]",
+		"[mdio_data]",
+		"[mdio_clk]",
 		"P9_22 [spi0_sclk]",
 		"P9_21 [spi0_d0]",
 		"P9_18 [spi0_d1]",
 		"P9_17 [spi0_cs0]",
-		"[sd card]",
-		"P9_42A [ecappwm0]",
-		"P8_35 [hdmi]",
-		"P8_33 [hdmi]",
-		"P8_31 [hdmi]",
-		"P8_32 [hdmi]",
+		"[mmc0_cd]",
+		"P8_42A [ecappwm0]",
+		"P8_35 [lcd d12]",
+		"P8_33 [lcd d13]",
+		"P8_31 [lcd d14]",
+		"P8_32 [lcd d15]",
 		"P9_20 [i2c2_sda]",
 		"P9_19 [i2c2_scl]",
 		"P9_26 [uart1_rxd]",
 		"P9_24 [uart1_txd]",
-		"[ethernet]",
-		"[ethernet]",
-		"[usb]",
-		"[hdmi]",
+		"[rmii1_txd3]",
+		"[rmii1_txd2]",
+		"[usb0_drvvbus]",
+		"[hdmi cec]",
 		"P9_41B",
-		"[ethernet]",
+		"[rmii1_txd1]",
 		"P8_19 [ehrpwm2a]",
 		"P8_13 [ehrpwm2b]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P8_14",
 		"P8_17",
-		"[ethernet]",
-		"[ethernet]",
+		"[rmii1_txd0]",
+		"[rmii1_refclk]",
 		"P9_11 [uart4_rxd]",
 		"P9_13 [uart4_txd]";
 };
 
 &gpio1 {
 	gpio-line-names =
-		"P8_25 [emmc]",
-		"[emmc]",
-		"P8_5 [emmc]",
-		"P8_6 [emmc]",
-		"P8_23 [emmc]",
-		"P8_22 [emmc]",
-		"P8_3 [emmc]",
-		"P8_4 [emmc]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"P8_25 [mmc1_dat0]",
+		"[mmc1_dat1]",
+		"P8_5 [mmc1_dat2]",
+		"P8_6 [mmc1_dat3]",
+		"P8_23 [mmc1_dat4]",
+		"P8_22 [mmc1_dat5]",
+		"P8_3 [mmc1_dat6]",
+		"P8_4 [mmc1_dat7]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P8_12",
 		"P8_11",
 		"P8_16",
@@ -82,13 +82,13 @@ &gpio1 {
 		"P9_23",
 		"P9_14 [ehrpwm1a]",
 		"P9_16 [ehrpwm1b]",
-		"[emmc]",
+		"[emmc rst]",
 		"[usr0 led]",
 		"[usr1 led]",
 		"[usr2 led]",
 		"[usr3 led]",
-		"[hdmi]",
-		"[usb]",
+		"[hdmi irq]",
+		"[usb vbus oc]",
 		"[hdmi audio]",
 		"P9_12",
 		"P8_26",
@@ -116,38 +116,38 @@ &gpio2 {
 		"P8_38 [hdmi]",
 		"P8_36 [hdmi]",
 		"P8_34 [hdmi]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
+		"[rmii1_rxd3]",
+		"[rmii1_rxd2]",
+		"[rmii1_rxd1]",
+		"[rmii1_rxd0]",
 		"P8_27 [hdmi]",
 		"P8_29 [hdmi]",
 		"P8_28 [hdmi]",
 		"P8_30 [hdmi]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]";
+		"[mmc0_dat3]",
+		"[mmc0_dat2]",
+		"[mmc0_dat1]",
+		"[mmc0_dat0]",
+		"[mmc0_clk]",
+		"[mmc0_cmd]";
 };
 
 &gpio3 {
 	gpio-line-names =
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[i2c0]",
-		"[i2c0]",
-		"[emu]",
-		"[emu]",
-		"[ethernet]",
-		"[ethernet]",
-		"[NC]",
-		"[NC]",
-		"[usb]",
+		"[mii col]",
+		"[mii crs]",
+		"[mii rx err]",
+		"[mii tx en]",
+		"[mii rx dv]",
+		"[i2c0 sda]",
+		"[i2c0 scl]",
+		"[jtag emu0]",
+		"[jtag emu1]",
+		"[mii tx clk]",
+		"[mii rx clk]",
+		"NC",
+		"NC",
+		"[usb vbus en]",
 		"P9_31 [spi1_sclk]",
 		"P9_29 [spi1_d0]",
 		"P9_30 [spi1_d1]",
@@ -156,14 +156,14 @@ &gpio3 {
 		"P9_27",
 		"P9_41A",
 		"P9_25",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]";
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
 };